From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> Subject: [PATCH] pata_atiixp: add proper ->prereset method Fixes PCI access before PCI resources are allocated. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> --- earlier references: https://lkml.org/lkml/2009/11/25/320 drivers/ata/pata_atiixp.c | 35 ++++++++++++++++++++++++++--------- 1 file changed, 26 insertions(+), 9 deletions(-) Index: b/drivers/ata/pata_atiixp.c =================================================================== --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -49,6 +49,31 @@ static int atiixp_cable_detect(struct at static DEFINE_SPINLOCK(atiixp_lock); /** + * atiixp_prereset - perform reset handling + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Reset sequence checking enable bits to see which ports are + * active. + */ + +static int atiixp_prereset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits atiixp_enable_bits[] = { + { 0x48, 1, 0x01, 0x00 }, + { 0x48, 1, 0x08, 0x00 } + }; + + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** * atiixp_set_pio_timing - set initial PIO mode data * @ap: ATA interface * @adev: ATA device @@ -221,6 +246,7 @@ static struct ata_port_operations atiixp .bmdma_start = atiixp_bmdma_start, .bmdma_stop = atiixp_bmdma_stop, + .prereset = atiixp_prereset, .cable_detect = atiixp_cable_detect, .set_piomode = atiixp_set_piomode, .set_dmamode = atiixp_set_dmamode, @@ -235,16 +261,7 @@ static int atiixp_init_one(struct pci_de .udma_mask = ATA_UDMA5, .port_ops = &atiixp_port_ops }; - static const struct pci_bits atiixp_enable_bits[] = { - { 0x48, 1, 0x01, 0x00 }, - { 0x48, 1, 0x08, 0x00 } - }; const struct ata_port_info *ppi[] = { &info, &info }; - int i; - - for (i = 0; i < 2; i++) - if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i])) - ppi[i] = &ata_dummy_port_info; return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL, ATA_HOST_PARALLEL_SCAN); -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
