From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] cy82c693: fix PCI device selection
Wrong PCI device may be selected by cy82c693_set_pio_mode() if modular
IDE host drivers are used and there are additional IDE PCI devices
installed in the system. Fix it.
While at it remove redundant pci_get_slot() call as cy82c693_init_one()
already takes care of keeping the reference on the second port's PCI
device.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/cy82c693.c | 15 +--------------
1 file changed, 1 insertion(+), 14 deletions(-)
Index: b/drivers/ide/cy82c693.c
===================================================================
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -82,24 +82,13 @@ static void cy82c693_set_dma_mode(ide_hw
static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
+ struct pci_dev *dev = to_pci_dev(hwif->host->dev[drive->dn / 2]);
int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
const unsigned long T = 1000000 / bus_speed;
unsigned int addrCtrl;
struct ide_timing t;
u8 time_16, time_8;
- /* select primary or secondary channel */
- if (hwif->index > 0) { /* drive is on the secondary channel */
- dev = pci_get_slot(dev->bus, dev->devfn+1);
- if (!dev) {
- printk(KERN_ERR "%s: tune_drive: "
- "Cannot find secondary interface!\n",
- drive->name);
- return;
- }
- }
-
ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
time_16 = clamp_val(t.recover - 1, 0, 15) |
@@ -141,8 +130,6 @@ static void cy82c693_set_pio_mode(ide_hw
pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
}
- if (hwif->index > 0)
- pci_dev_put(dev);
}
static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
