Re: [V8 PATCH 5/5] MX53 Enable the AHCI SATA on MX53 SMD board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 22, 2011 at 7:14 AM, Richard Zhu <richard.zhu@xxxxxxxxxx> wrote:
> Signed-off-by: Richard Zhu <richard.zhu@xxxxxxxxxx>
> ---
>  arch/arm/mach-mx5/board-mx53_smd.c |   16 ++++++++++++++++
>  1 files changed, 16 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
> index bc02894..9d06fbe 100644
> --- a/arch/arm/mach-mx5/board-mx53_smd.c
> +++ b/arch/arm/mach-mx5/board-mx53_smd.c
> @@ -35,6 +35,7 @@
>  #include "devices-imx53.h"
>
>  #define SMD_FEC_PHY_RST                IMX_GPIO_NR(7, 6)
> +#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
>
>  static iomux_v3_cfg_t mx53_smd_pads[] = {
>        MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
> @@ -111,6 +112,19 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
>        .bitrate = 100000,
>  };
>
> +static inline void mx53_smd_ahci_pwr_on(void)
> +{
> +       int ret;
> +
> +       /* Enable SATA PWR */
> +       ret = gpio_request(MX53_SMD_SATA_PWR_EN, "ahci-sata-pwr");

Please use gpio_request_one.

> +       if (ret) {
> +               printk(KERN_ERR "failed to get SATA_PWR_EN: %d\n", ret);

You can use pr_err instead.

Regards,

Fabio Estevam
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux