From: Rob Herring <rob.herring@xxxxxxxxxxx>
Add devicetree match table to ahci platform driver for Calxeda Highbank
AHCI controller.
Signed-off-by: Rob Herring <rob.herring@xxxxxxxxxxx>
Cc: Jeff Garzik <jgarzik@xxxxxxxxx>
Cc: linux-ide@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
---
.../devicetree/bindings/ata/calxeda-sata.txt | 17 +++++++++++++++++
drivers/ata/ahci_platform.c | 7 +++++++
2 files changed, 24 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/calxeda-sata.txt
diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt b/Documentation/devicetree/bindings/ata/calxeda-sata.txt
new file mode 100644
index 0000000..79caa56
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/calxeda-sata.txt
@@ -0,0 +1,17 @@
+* Calxeda SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "calxeda,hb-ahci"
+- interrupts : <interrupt mapping for SATA IRQ>
+- reg : <registers mapping>
+
+Example:
+ sata@ffe08000 {
+ compatible = "calxeda,hb-ahci";
+ reg = <0xffe08000 0x1000>;
+ interrupts = <115>;
+ };
+
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 6fef1fa..9bfc970 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -171,11 +171,18 @@ static int __devexit ahci_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id ahci_of_match[] = {
+ { .compatible = "calxeda,hb-ahci", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
static struct platform_driver ahci_driver = {
.remove = __devexit_p(ahci_remove),
.driver = {
.name = "ahci",
.owner = THIS_MODULE,
+ .of_match_table = ahci_of_match,
},
};
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
