This is the second part of the new block driver,mtip32xx, for Micron
PCIe SSD, which contains the source for hardware related operations.
Signed-off-by: Asai Thambi S P <asamymuthupa@xxxxxxxxxx>
Signed-off-by: Sam Bradshaw <sbradshaw@xxxxxxxxxx>
---
drivers/block/mtip32xx/mtip_hw.c | 2842
++++++++++++++++++++++++++++++++++++++
1 files changed, 2842 insertions(+), 0 deletions(-)
create mode 100644 drivers/block/mtip32xx/mtip_hw.c
diff --git a/drivers/block/mtip32xx/mtip_hw.c
b/drivers/block/mtip32xx/mtip_hw.c
new file mode 100644
index 0000000..d676eef
--- /dev/null
+++ b/drivers/block/mtip32xx/mtip_hw.c
@@ -0,0 +1,2842 @@
+/*
+ * Handles the hw layer of the P320 SSD Block Driver
+ * Copyright (C) 2011 Micron Technology, Inc.
+ *
+ * Portions of this code were derived from works subjected to the
+ * following copyright:
+ * Copyright (C) 2009 Integrated Device Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/ata.h>
+#include <linux/delay.h>
+#include <linux/hdreg.h>
+#include <linux/uaccess.h>
+#include <linux/random.h>
+#include <linux/smp.h>
+#include <linux/compat.h>
+#include "mtip32xx.h"
+
+#define HW_CMD_TBL_HDR_SZ 0x80
+#define HW_RX_FIS_SZ 0x100
+#define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32)
+#define HW_CMD_TBL_SZ (HW_CMD_TBL_HDR_SZ + (MTIP_MAX_SG * 16))
+#define HW_CMD_TBL_AR_SZ (HW_CMD_TBL_SZ * MTIP_MAX_COMMAND_SLOTS)
+#define HW_PORT_PRIV_DMA_SZ \
+ (HW_CMD_SLOT_SZ + HW_CMD_TBL_AR_SZ + HW_RX_FIS_SZ)
+
+#define HBA_CAPS 0x00
+#define HOST_CTRL 0x04
+#define HOST_IRQ_STAT 0x08
+#define PORTS_IMPL 0x0c
+#define VERSION 0x10
+#define CCCC 0x14
+#define CCCP 0x18
+#define EML 0x1c
+#define EMC 0x20
+#define EX_HOST_CAP 0x24
+
+#define HOST_CAP_64 (1 << 31)
+#define HOST_IRQ_EN (1 << 1)
+#define HOST_RESET (1 << 0)
+#define HOST_HSORG 0xFC
+#define HSORG_DISABLE_SLOTGRP_INTR (1<<24)
+#define HSORG_DISABLE_SLOTGRP_PXIS (1<<16)
+#define HSORG_HWREV 0xFF00
+#define HSORG_STYLE 0x8
+#define HSORG_SLOTGROUPS 0x7
+
+#define PORT_LST_ADDR 0x00
+#define PORT_LST_ADDR_HI 0x04
+#define PORT_FIS_ADDR 0x08
+#define PORT_FIS_ADDR_HI 0x0c
+#define PORT_IRQ_STAT 0x10
+#define PORT_IRQ_EN 0x14
+#define PORT_CMD 0x18
+#define PORT_TFDATA 0x20
+#define PORT_SCR_STAT 0x28
+#define PORT_SCR_CTL 0x2c
+#define PORT_SCR_ERR 0x30
+#define PORT_SACTIVE 0x34
+#define PORT_COMMAND_ISSUE 0x38
+#define PORT_SCR_NTF 0x3c
+#define PORT_SDBV 0x7C
+
+#define PORT_CMD_ICC_ACTIVE (1 << 28)
+#define PORT_CMD_LIST_ON (1 << 15)
+#define PORT_CMD_FIS_RX (1 << 4)
+#define PORT_CMD_CLO (1 << 3)
+#define PORT_CMD_START (1 << 0)
+#define PORT_OFFSET 0x100
+#define PORT_MEM_SIZE 0x80
+#define RX_FIS_D2H_REG 0x40
+#define RX_FIS_PIO 0x20
+
+#define PORT_IRQ_COLD_PRES (1 << 31)
+#define PORT_IRQ_TF_ERR (1 << 30)
+#define PORT_IRQ_HBUS_ERR (1 << 29)
+#define PORT_IRQ_HBUS_DATA_ERR (1 << 28)
+#define PORT_IRQ_IF_ERR (1 << 27)
+#define PORT_IRQ_IF_NONFATAL (1 << 26)
+#define PORT_IRQ_OVERFLOW (1 << 24)
+#define PORT_IRQ_BAD_PMP (1 << 23)
+#define PORT_IRQ_PHYRDY (1 << 22)
+#define PORT_IRQ_DEV_ILCK (1 << 7)
+#define PORT_IRQ_CONNECT (1 << 6)
+#define PORT_IRQ_DPS (1 << 5)
+#define PORT_IRQ_UNK_FIS (1 << 4)
+#define PORT_IRQ_SDB_FIS (1 << 3)
+#define PORT_IRQ_DMAS_FIS (1 << 2)
+#define PORT_IRQ_PIOS_FIS (1 << 1)
+#define PORT_IRQ_D2H_REG_FIS (1 << 0)
+
+#define HW_CMD_WRITE (1 << 6)
+#define HW_CMD_PREFETCH (1 << 7)
+
+#define PORT_IRQ_ERR \
+ (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | PORT_IRQ_CONNECT | \
+ PORT_IRQ_PHYRDY | PORT_IRQ_UNK_FIS | PORT_IRQ_BAD_PMP | \
+ PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_NONFATAL
| \
+ PORT_IRQ_OVERFLOW)
+#define PORT_IRQ_LEGACY \
+ (PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
+#define PORT_IRQ_HANDLED \
+ (PORT_IRQ_SDB_FIS | PORT_IRQ_LEGACY | \
+ PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR | \
+ PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)
+#define DEF_PORT_IRQ \
+ (PORT_IRQ_ERR | PORT_IRQ_LEGACY | PORT_IRQ_SDB_FIS)
+
+/* product numbers */
+#define MTIP_PRODUCT_UNKNOWN 0x00
+#define MTIP_PRODUCT_ASICFPGA 0x11
+
+struct mtip_compat_ide_task_request_s {
+ __u8 io_ports[8];
+ __u8 hob_ports[8];
+ ide_reg_valid_t out_flags;
+ ide_reg_valid_t in_flags;
+ int data_phase;
+ int req_cmd;
+ compat_ulong_t out_size;
+ compat_ulong_t in_size;
+};
+
+static int mtip_exec_internal_command(struct mtip_port *port,
+ void *fis,
+ int fisLen,
+ dma_addr_t buffer,
+ int bufLen,
+ u32 opts,
+ gfp_t atomic,
+ unsigned long timeout);
+
+/*
+ * Obtain an empty command slot.
+ *
+ * This function needs to be reentrant since it could be called
+ * at the same time on multiple CPUs. The allocation of the
+ * command slot must be atomic.
+ *
+ * @port Pointer to the port data structure.
+ *
+ * return value
+ * >= 0 Index of command slot obtained.
+ * -1 No command slots available.
+ */
+static int get_slot(struct mtip_port *port)
+{
+ int slot, i;
+ unsigned int num_command_slots = port->dd->slot_groups * 32;
+
+ /*
+ * Try 10 times, because there is a small race here.
+ * that's ok, because it's still cheaper than a lock.
+ */
+ for (i = 0; i < 10; i++) {
+ slot = find_next_zero_bit(port->allocated,
+ num_command_slots, 1);
+ if ((slot < num_command_slots) &&
+ (!test_and_set_bit(slot, port->allocated)))
+ return slot;
+ }
+ dev_warn(&port->dd->pdev->dev, "Failed to get a tag.\n");
+
+ if (mtip_check_surprise_removal(port->dd->pdev)) {
+ /* Device not present, clean outstanding commands */
+ mtip_command_cleanup(port->dd);
+ }
+ return -1;
+}
+
+/*
+ * Release a command slot.
+ *
+ * @port Pointer to the port data structure.
+ * @tag Tag of command to release
+ *
+ * return value
+ * None
+ */
+static inline void release_slot(struct mtip_port *port, int tag)
+{
+ smp_mb__before_clear_bit();
+ clear_bit(tag, port->allocated);
+ smp_mb__after_clear_bit();
+}
+
+/*
+ * Issue a command to the hardware.
+ *
+ * Set the appropriate bit in the s_active and Command Issue hardware
+ * registers, causing hardware command processing to begin.
+ *
+ * @port Pointer to the port structure.
+ * @tag The tag of the command to be issued.
+ *
+ * return value
+ * None
+ */
+static inline void mtip_issue_ncq_command(struct mtip_port *port, int
tag)
+{
+ unsigned long flags = 0;
+
+ atomic_set(&port->commands[tag].active, 1);
+
+ spin_lock_irqsave(&port->cmd_issue_lock, flags);
+
+ writel((1 << MTIP_TAG_BIT(tag)),
+ port->s_active[MTIP_TAG_INDEX(tag)]);
+ writel((1 << MTIP_TAG_BIT(tag)),
+ port->cmd_issue[MTIP_TAG_INDEX(tag)]);
+
+ spin_unlock_irqrestore(&port->cmd_issue_lock, flags);
+}
+
+/*
+ * Called periodically to see if any read/write commands are
+ * taking too long to complete.
+ *
+ * @data Pointer to the PORT data structure.
+ *
+ * return value
+ * None
+ */
+void mtip_timeout_function(unsigned long int data)
+{
+ struct mtip_port *port = (struct mtip_port *) data;
+ struct host_to_dev_fis *fis;
+ struct mtip_cmd *command;
+ int tag, cmdto_cnt = 0;
+ unsigned int bit, group;
+ unsigned int num_command_slots = port->dd->slot_groups * 32;
+
+ if (unlikely(!port))
+ return;
+
+ if (atomic_read(&port->dd->resumeflag) == TRUE) {
+ mod_timer(&port->cmd_timer,
+ jiffies + msecs_to_jiffies(30000));
+ return;
+ }
+
+ for (tag = 0; tag < num_command_slots; tag++) {
+ /*
+ * Skip internal command slot as it has
+ * its own timeout mechanism
+ */
+ if (tag == MTIP_TAG_INTERNAL)
+ continue;
+
+ if (atomic_read(&port->commands[tag].active) &&
+ (time_after(jiffies, port->commands[tag].comp_time)))
{
+ group = tag >> 5;
+ bit = tag & 0x1f;
+
+ command = &port->commands[tag];
+ fis = (struct host_to_dev_fis *)
command->command;
+
+ dev_warn(&port->dd->pdev->dev,
+ "Timeout for command tag %d\n", tag);
+
+ cmdto_cnt++;
+ if (cmdto_cnt == 1)
+ atomic_inc(&port->dd->eh_active);
+
+ /*
+ * Clear the completed bit. This should prevent
+ * any interrupt handlers from trying to retire
+ * the command.
+ */
+ writel(1 << bit, port->completed[group]);
+
+ /* Call the async completion callback. */
+ if (likely(command->async_callback))
+
command->async_callback(command->async_data,
+ -EIO);
+ command->async_callback = NULL;
+ command->comp_func = NULL;
+
+ /* Unmap the DMA scatter list entries */
+ dma_unmap_sg(&port->dd->pdev->dev,
+ command->sg,
+ command->scatter_ents,
+ command->direction);
+
+ /*
+ * Clear the allocated bit and active tag for
the
+ * command.
+ */
+ atomic_set(&port->commands[tag].active, 0);
+ release_slot(port, tag);
+
+ up(&port->cmd_slot);
+ }
+ }
+
+ if (cmdto_cnt) {
+ dev_warn(&port->dd->pdev->dev,
+ "%d commands timed out: restarting port",
+ cmdto_cnt);
+ mtip_restart_port(port);
+ atomic_dec(&port->dd->eh_active);
+ }
+
+ /* Restart the timer */
+ mod_timer(&port->cmd_timer,
+ jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
+}
+
+/*
+ * IO completion function.
+ *
+ * This completion function is called by the driver ISR when a
+ * command that was issued by the kernel completes. It first calls the
+ * asynchronous completion function which normally calls back into the
block
+ * layer passing the asynchronous callback data, then unmaps the
+ * scatter list associated with the completed command, and finally
+ * clears the allocated bit associated with the completed command.
+ *
+ * @port Pointer to the port data structure.
+ * @tag Tag of the command.
+ * @data Pointer to driver_data.
+ * @status Completion status.
+ *
+ * return value
+ * None
+ */
+static void mtip_async_complete(struct mtip_port *port,
+ int tag,
+ void *data,
+ int status)
+{
+ struct mtip_cmd *command;
+ struct driver_data *dd = data;
+ int cb_status = status ? -EIO : 0;
+
+ if (unlikely(!dd) || unlikely(!port))
+ return;
+
+ command = &port->commands[tag];
+
+ if (unlikely(status == PORT_IRQ_TF_ERR)) {
+ dev_warn(&port->dd->pdev->dev,
+ "Command tag %d failed due to TFE\n", tag);
+ }
+
+ /* Upper layer callback */
+ if (likely(command->async_callback))
+ command->async_callback(command->async_data, cb_status);
+
+ command->async_callback = NULL;
+ command->comp_func = NULL;
+
+ /* Unmap the DMA scatter list entries */
+ dma_unmap_sg(&dd->pdev->dev,
+ command->sg,
+ command->scatter_ents,
+ command->direction);
+
+ /* Clear the allocated and active bits for the command */
+ atomic_set(&port->commands[tag].active, 0);
+ release_slot(port, tag);
+
+ up(&port->cmd_slot);
+}
+
+/*
+ * Internal command completion callback function.
+ *
+ * This function is normally called by the driver ISR when an internal
+ * command completed. This function signals the command completion by
+ * calling complete().
+ *
+ * @port Pointer to the port data structure.
+ * @tag Tag of the command that has completed.
+ * @data Pointer to a completion structure.
+ * @status Completion status.
+ *
+ * return value
+ * None
+ */
+static void mtip_completion(struct mtip_port *port,
+ int tag,
+ void *data,
+ int status)
+{
+ struct mtip_cmd *command = &port->commands[tag];
+ struct completion *waiting = data;
+ if (unlikely(status == PORT_IRQ_TF_ERR))
+ dev_warn(&port->dd->pdev->dev,
+ "Internal command %d completed with TFE\n",
tag);
+
+ command->async_callback = NULL;
+ command->comp_func = NULL;
+
+ complete(waiting);
+}
+
+/*
+ * Enable/disable the reception of FIS
+ *
+ * @port Pointer to the port data structure
+ * @enable 1 to enable, 0 to disable
+ *
+ * return value
+ * Previous state: 1 enabled, 0 disabled
+ */
+static int mtip_enable_fis(struct mtip_port *port, int enable)
+{
+ u32 tmp;
+
+ /* enable FIS reception */
+ tmp = readl(port->mmio + PORT_CMD);
+ if (enable)
+ writel(tmp | PORT_CMD_FIS_RX, port->mmio + PORT_CMD);
+ else
+ writel(tmp & ~PORT_CMD_FIS_RX, port->mmio + PORT_CMD);
+
+ /* Flush */
+ readl(port->mmio + PORT_CMD);
+
+ return (((tmp & PORT_CMD_FIS_RX) == PORT_CMD_FIS_RX));
+}
+
+/*
+ * Enable/disable the DMA engine
+ *
+ * @port Pointer to the port data structure
+ * @enable 1 to enable, 0 to disable
+ *
+ * return value
+ * Previous state: 1 enabled, 0 disabled.
+ */
+static int mtip_enable_engine(struct mtip_port *port, int enable)
+{
+ u32 tmp;
+
+ /* enable FIS reception */
+ tmp = readl(port->mmio + PORT_CMD);
+ if (enable)
+ writel(tmp | PORT_CMD_START, port->mmio + PORT_CMD);
+ else
+ writel(tmp & ~PORT_CMD_START, port->mmio + PORT_CMD);
+
+ readl(port->mmio + PORT_CMD);
+ return (((tmp & PORT_CMD_START) == PORT_CMD_START));
+}
+
+/*
+ * Enables the port DMA engine and FIS reception.
+ *
+ * return value
+ * None
+ */
+static inline void mtip_start_port(struct mtip_port *port)
+{
+ /* Enable FIS reception */
+ mtip_enable_fis(port, 1);
+
+ /* Enable the DMA engine */
+ mtip_enable_engine(port, 1);
+}
+
+/*
+ * Deinitialize a port by disabling port interrupts, the DMA engine,
+ * and FIS reception.
+ *
+ * @port Pointer to the port structure
+ *
+ * return value
+ * None
+ */
+static inline void mtip_deinit_port(struct mtip_port *port)
+{
+ /* Disable interrupts on this port */
+ writel(0, port->mmio + PORT_IRQ_EN);
+
+ /* Disable the DMA engine */
+ mtip_enable_engine(port, 0);
+
+ /* Disable FIS reception */
+ mtip_enable_fis(port, 0);
+}
+
+/*
+ * Initialize a port.
+ *
+ * This function deinitializes the port by calling mtip_deinit_port()
and
+ * then initializes it by setting the command header and RX FIS
addresses,
+ * clearing the SError register and any pending port interrupts before
+ * re-enabling the default set of port interrupts.
+ *
+ * @port Pointer to the port structure.
+ *
+ * return value
+ * None
+ */
+static void mtip_init_port(struct mtip_port *port)
+{
+ int i;
+ mtip_deinit_port(port);
+
+ /* Program the command list base and FIS base addresses */
+ if (readl(port->dd->mmio + HBA_CAPS) & HOST_CAP_64) {
+ writel((port->command_list_dma >> 16) >> 16,
+ port->mmio + PORT_LST_ADDR_HI);
+ writel((port->rxfis_dma >> 16) >> 16,
+ port->mmio + PORT_FIS_ADDR_HI);
+ }
+
+ writel(port->command_list_dma & 0xffffffff,
+ port->mmio + PORT_LST_ADDR);
+ writel(port->rxfis_dma & 0xffffffff, port->mmio +
PORT_FIS_ADDR);
+
+ /* Clear SError */
+ writel(readl(port->mmio + PORT_SCR_ERR), port->mmio +
PORT_SCR_ERR);
+
+ /* reset the completed registers.*/
+ for (i = 0; i < port->dd->slot_groups; i++)
+ writel(0xFFFFFFFF, port->completed[i]);
+
+ /* Clear any pending interrupts for this port */
+ writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio +
PORT_IRQ_STAT);
+
+ /* Enable port interrupts */
+ writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_EN);
+}
+
+/*
+ * Reset the HBA (without sleeping)
+ *
+ * Just like hba_reset, except does not call sleep, so can be
+ * run from interrupt/tasklet context.
+ *
+ * @dd Pointer to the driver data structure.
+ *
+ * return value
+ * 0 The reset was successful.
+ * -1 The HBA Reset bit did not clear.
+ */
+int hba_reset_nosleep(struct driver_data *dd)
+{
+ unsigned long timeout;
+
+ /* Chip quirk: quiesce any chip function */
+ mdelay(10);
+
+ /* Set the reset bit */
+ writel(HOST_RESET, dd->mmio + HOST_CTRL);
+
+ /* Flush */
+ readl(dd->mmio + HOST_CTRL);
+
+ /*
+ * Wait 10ms then spin for up to 1 second
+ * waiting for reset acknowledgement
+ */
+ timeout = jiffies + msecs_to_jiffies(1000);
+ mdelay(10);
+ while ((readl(dd->mmio + HOST_CTRL) & HOST_RESET)
+ && time_before(jiffies, timeout))
+ mdelay(1);
+
+ if (readl(dd->mmio + HOST_CTRL) & HOST_RESET)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * Restart a port
+ *
+ * @port Pointer to the port data structure.
+ *
+ * return value
+ * None
+ */
+void mtip_restart_port(struct mtip_port *port)
+{
+ unsigned long timeout;
+
+ /* Disable the DMA engine */
+ mtip_enable_engine(port, 0);
+
+ /* Chip quirk: wait up to 500ms for PxCMD.CR == 0 */
+ timeout = jiffies + msecs_to_jiffies(500);
+ while ((readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON)
+ && time_before(jiffies, timeout))
+ ;
+
+ /*
+ * Chip quirk: escalate to hba reset if
+ * PxCMD.CR not clear after 500 ms
+ */
+ if (readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON) {
+ dev_warn(&port->dd->pdev->dev,
+ "PxCMD.CR not clear, escalating reset\n");
+
+ if (hba_reset_nosleep(port->dd))
+ dev_err(&port->dd->pdev->dev,
+ "HBA reset escalation failed.\n");
+
+ /* 30 ms delay before com reset to quiesce chip */
+ mdelay(30);
+ }
+
+ dev_warn(&port->dd->pdev->dev, "Issuing COM reset\n");
+
+ /* Set PxSCTL.DET */
+ writel(readl(port->mmio + PORT_SCR_CTL) |
+ 1, port->mmio + PORT_SCR_CTL);
+ readl(port->mmio + PORT_SCR_CTL);
+
+ /* Wait 1 ms to quiesce chip function */
+ timeout = jiffies + msecs_to_jiffies(1);
+ while (time_before(jiffies, timeout))
+ ;
+
+ /* Clear PxSCTL.DET */
+ writel(readl(port->mmio + PORT_SCR_CTL) & ~1,
+ port->mmio + PORT_SCR_CTL);
+ readl(port->mmio + PORT_SCR_CTL);
+
+ /* Wait 500 ms for bit 0 of PORT_SCR_STS to be set */
+ timeout = jiffies + msecs_to_jiffies(500);
+ while (((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0)
+ && time_before(jiffies, timeout))
+ ;
+
+ if ((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0)
+ dev_warn(&port->dd->pdev->dev,
+ "COM reset failed\n");
+
+ /* Clear SError, the PxSERR.DIAG.x should be set so clear it */
+ writel(readl(port->mmio + PORT_SCR_ERR), port->mmio +
PORT_SCR_ERR);
+
+ /* Enable the DMA engine */
+ mtip_enable_engine(port, 1);
+}
+
+/*
+ * Helper function for tag logging
+ */
+static void print_tags(struct driver_data *dd,
+ char *msg,
+ unsigned long *tagbits)
+{
+ unsigned int tag, count = 0;
+
+ for (tag = 0; tag < (dd->slot_groups) * 32; tag++) {
+ if (test_bit(tag, tagbits))
+ count++;
+ }
+ if (count)
+ dev_info(&dd->pdev->dev, "%s [%i tags]\n", msg, count);
+}
+
+/*
+ * Handle an error.
+ *
+ * @dd Pointer to the DRIVER_DATA structure.
+ *
+ * return value
+ * None
+ */
+static void mtip_handle_tfe(struct driver_data *dd)
+{
+ int group, tag, bit, reissue;
+ struct mtip_port *port;
+ struct mtip_cmd *command;
+ u32 completed;
+ struct host_to_dev_fis *fis;
+ unsigned long tagaccum[SLOTBITS_IN_LONGS];
+
+ dev_warn(&dd->pdev->dev, "Taskfile error\n");
+
+ port = dd->port;
+
+ /* Stop the timer to prevent command timeouts. */
+ del_timer(&port->cmd_timer);
+
+ /* Set eh_active */
+ atomic_inc(&dd->eh_active);
+
+ /* Loop through all the groups */
+ for (group = 0; group < dd->slot_groups; group++) {
+ completed = readl(port->completed[group]);
+
+ /* clear completed status register in the hardware.*/
+ writel(completed, port->completed[group]);
+
+ /* clear the tag accumulator */
+ memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
+
+ /* Process successfully completed commands */
+ for (bit = 0; bit < 32 && completed; bit++) {
+ if (!(completed & (1<<bit)))
+ continue;
+ tag = (group << 5) + bit;
+
+ /* Skip the internal command slot */
+ if (tag == MTIP_TAG_INTERNAL)
+ continue;
+
+ command = &port->commands[tag];
+ if (likely(command->comp_func)) {
+ set_bit(tag, tagaccum);
+ atomic_set(&port->commands[tag].active,
0);
+ command->comp_func(port,
+ tag,
+ command->comp_data,
+ 0);
+ } else {
+ dev_err(&port->dd->pdev->dev,
+ "Missing completion func for tag
%d",
+ tag);
+ if
(mtip_check_surprise_removal(dd->pdev)) {
+ mtip_command_cleanup(dd);
+ /* don't proceed further */
+ return;
+ }
+ }
+ }
+ }
+ print_tags(dd, "TFE tags completed:", tagaccum);
+
+ /* Restart the port */
+ mdelay(20);
+ mtip_restart_port(port);
+
+ /* clear the tag accumulator */
+ memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
+
+ /* Loop through all the groups */
+ for (group = 0; group < dd->slot_groups; group++) {
+ for (bit = 0; bit < 32; bit++) {
+ reissue = 1;
+ tag = (group << 5) + bit;
+
+ /* If the active bit is set re-issue the command
*/
+ if (atomic_read(&port->commands[tag].active) ==
0)
+ continue;
+
+ fis = (struct host_to_dev_fis *)
+ port->commands[tag].command;
+
+ /* Should re-issue? */
+ if (tag == MTIP_TAG_INTERNAL ||
+ fis->command == ATA_CMD_SET_FEATURES)
+ reissue = 0;
+
+ /*
+ * First check if this command has
+ * exceeded its retries.
+ */
+ if (reissue &&
+ (port->commands[tag].retries-- > 0)) {
+
+ set_bit(tag, tagaccum);
+
+ /* Update the timeout value. */
+ port->commands[tag].comp_time =
+ jiffies + msecs_to_jiffies(
+ MTIP_NCQ_COMMAND_TIMEOUT_MS);
+ /* Re-issue the command. */
+ mtip_issue_ncq_command(port, tag);
+
+ continue;
+ }
+
+ /* Retire a command that will not be reissued */
+ dev_warn(&port->dd->pdev->dev,
+ "retiring tag %d\n", tag);
+ atomic_set(&port->commands[tag].active, 0);
+
+ if (port->commands[tag].comp_func)
+ port->commands[tag].comp_func(
+ port,
+ tag,
+ port->commands[tag].comp_data,
+ PORT_IRQ_TF_ERR);
+ else
+ dev_warn(&port->dd->pdev->dev,
+ "Bad completion for tag %d\n",
+ tag);
+ }
+ }
+ print_tags(dd, "TFE tags reissued:", tagaccum);
+
+ /* Decrement eh_active */
+ atomic_dec(&dd->eh_active);
+
+ mod_timer(&port->cmd_timer,
+ jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
+}
+
+/*
+ * Handle a set device bits interrupt
+ */
+static inline void mtip_process_sdbf(struct driver_data *dd)
+{
+ struct mtip_port *port = dd->port;
+ int group, tag, bit;
+ u32 completed;
+ struct mtip_cmd *command;
+
+ /* walk all bits in all slot groups */
+ for (group = 0; group < dd->slot_groups; group++) {
+ completed = readl(port->completed[group]);
+
+ /* clear completed status register in the hardware.*/
+ writel(completed, port->completed[group]);
+
+ /* Process completed commands. */
+ for (bit = 0;
+ (bit < 32) && completed;
+ bit++, completed >>= 1) {
+ if (completed & 0x01) {
+ tag = (group << 5) | bit;
+
+ /* skip internal command slot. */
+ if (unlikely(tag == MTIP_TAG_INTERNAL))
+ continue;
+
+ command = &port->commands[tag];
+
+ /* make internal callback */
+ if (likely(command->comp_func)) {
+ command->comp_func(
+ port,
+ tag,
+ command->comp_data,
+ 0);
+ } else {
+ dev_warn(&dd->pdev->dev,
+ "Null completion "
+ "for tag %d",
+ tag);
+
+ if (mtip_check_surprise_removal(
+ dd->pdev)) {
+
mtip_command_cleanup(dd);
+ return;
+ }
+ }
+ }
+ }
+ }
+}
+
+/*
+ * Process legacy pio and d2h interrupts
+ */
+static inline void mtip_process_legacy(struct driver_data *dd, u32
port_stat)
+{
+ struct mtip_port *port = dd->port;
+ struct mtip_cmd *cmd = &port->commands[MTIP_TAG_INTERNAL];
+
+ if (port->internal_cmd_in_progress &&
+ cmd != NULL &&
+ !(readl(port->cmd_issue[MTIP_TAG_INDEX(MTIP_TAG_INTERNAL)])
+ & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL)))) {
+ if (cmd->comp_func) {
+ cmd->comp_func(port,
+ MTIP_TAG_INTERNAL,
+ cmd->comp_data,
+ 0);
+ return;
+ }
+ }
+
+ dev_warn(&dd->pdev->dev, "IRQ status 0x%x ignored.\n",
port_stat);
+
+ return;
+}
+
+/*
+ * Demux and handle errors
+ */
+static inline void mtip_process_errors(struct driver_data *dd, u32
port_stat)
+{
+ if (likely(port_stat & (PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR)))
+ mtip_handle_tfe(dd);
+
+ if (unlikely(port_stat & PORT_IRQ_CONNECT)) {
+ dev_warn(&dd->pdev->dev,
+ "Clearing PxSERR.DIAG.x\n");
+ writel((1 << 26), dd->port->mmio + PORT_SCR_ERR);
+ }
+
+ if (unlikely(port_stat & PORT_IRQ_PHYRDY)) {
+ dev_warn(&dd->pdev->dev,
+ "Clearing PxSERR.DIAG.n\n");
+ writel((1 << 16), dd->port->mmio + PORT_SCR_ERR);
+ }
+
+ if (unlikely(port_stat & ~PORT_IRQ_HANDLED)) {
+ dev_warn(&dd->pdev->dev,
+ "Port stat errors %x unhandled\n",
+ (port_stat & ~PORT_IRQ_HANDLED));
+ }
+}
+
+static inline irqreturn_t mtip_handle_irq(struct driver_data *data)
+{
+ struct driver_data *dd = (struct driver_data *) data;
+ struct mtip_port *port = dd->port;
+ u32 hba_stat, port_stat;
+ int rv = IRQ_NONE;
+
+ hba_stat = readl(dd->mmio + HOST_IRQ_STAT);
+ if (hba_stat) {
+ rv = IRQ_HANDLED;
+
+ /* Acknowledge the interrupt status on the port.*/
+ port_stat = readl(port->mmio + PORT_IRQ_STAT);
+ writel(port_stat, port->mmio + PORT_IRQ_STAT);
+
+ /* Demux port status */
+ if (likely(port_stat & PORT_IRQ_SDB_FIS))
+ mtip_process_sdbf(dd);
+
+ if (unlikely(port_stat & PORT_IRQ_ERR)) {
+ if
(unlikely(mtip_check_surprise_removal(dd->pdev))) {
+ mtip_command_cleanup(dd);
+ /* don't proceed further */
+ return IRQ_HANDLED;
+ }
+
+ mtip_process_errors(dd, port_stat &
PORT_IRQ_ERR);
+ }
+
+ if (unlikely(port_stat & PORT_IRQ_LEGACY))
+ mtip_process_legacy(dd, port_stat &
PORT_IRQ_LEGACY);
+ }
+
+ /* acknowledge interrupt */
+ writel(hba_stat, dd->mmio + HOST_IRQ_STAT);
+
+ return rv;
+}
+
+#ifdef MTIP_USE_TASKLET
+/*
+ * Wrapper for mtip_handle_irq
+ * (ignores return code)
+ */
+static void mtip_tasklet(unsigned long data)
+{
+ mtip_handle_irq((struct driver_data *) data);
+}
+#endif
+
+/*
+ * HBA interrupt subroutine.
+ *
+ * @irq IRQ number.
+ * @instance Pointer to the driver data structure.
+ *
+ * return value
+ * IRQ_HANDLED A HBA interrupt was pending and handled.
+ * IRQ_NONE This interrupt was not for the HBA.
+ */
+static irqreturn_t mtip_irq_handler(int irq, void *instance)
+{
+ struct driver_data *dd = instance;
+#ifdef MTIP_USE_TASKLET
+ tasklet_schedule(&dd->tasklet);
+ return IRQ_HANDLED;
+#else
+ return mtip_handle_irq(dd);
+#endif
+}
+
+static void mtip_issue_non_ncq_command(struct mtip_port *port, int tag)
+{
+ atomic_set(&port->commands[tag].active, 1);
+ writel(1 << MTIP_TAG_BIT(tag),
+ port->cmd_issue[MTIP_TAG_INDEX(tag)]);
+}
+
+/*
+ * Wait for port to quiesce
+ *
+ * @port Pointer to port data structure
+ * @timeout Max duration to wait (ms)
+ *
+ * return value
+ * 0 Success
+ * -EBUSY Commands still active
+ */
+static int mtip_quiesce_io(struct mtip_port *port, unsigned long
timeout)
+{
+ unsigned long to;
+ unsigned int n, active;
+
+ to = jiffies + msecs_to_jiffies(timeout);
+ do {
+ /*
+ * Ignore s_active bit 0 of array element 0.
+ * This bit will always be set
+ */
+ active = readl(port->s_active[0]) & 0xfffffffe;
+ for (n = 1; n < port->dd->slot_groups; n++)
+ active |= readl(port->s_active[n]);
+
+ if (!active)
+ break;
+
+ msleep(1);
+ } while (time_before(jiffies, to));
+
+ return active ? -EBUSY : 0;
+}
+
+/*
+ * Execute an internal command and wait for the completion.
+ *
+ * @port Pointer to the port data structure.
+ * @fis Pointer to the FIS that describes the command.
+ * @fisLen Length in WORDS of the FIS.
+ * @buffer DMA accessible for command data.
+ * @bufLen Length, in bytes, of the data buffer.
+ * @opts Command header options, excluding the FIS length
+ * and the number of PRD entries.
+ * @timeout Time in ms to wait for the command to complete.
+ *
+ * return value
+ * 0 Command completed successfully.
+ * -EFAULT The buffer address is not correctly aligned.
+ * -EBUSY Internal command or other IO in progress.
+ * -EAGAIN Time out waiting for command to complete.
+ */
+static int mtip_exec_internal_command(struct mtip_port *port,
+ void *fis,
+ int fisLen,
+ dma_addr_t buffer,
+ int bufLen,
+ u32 opts,
+ gfp_t atomic,
+ unsigned long timeout)
+{
+ struct mtip_cmd_sg *command_sg;
+ DECLARE_COMPLETION_ONSTACK(wait);
+ int rv = 0;
+ struct mtip_cmd *int_cmd = &port->commands[MTIP_TAG_INTERNAL];
+
+ /* Make sure the buffer is 8 byte aligned. This is asic
specific. */
+ if (buffer & 0x00000007) {
+ dev_err(&port->dd->pdev->dev,
+ "SG buffer is not 8 byte aligned\n");
+ return -EFAULT;
+ }
+
+ /* Only one internal command should be running at a time */
+ if (test_and_set_bit(MTIP_TAG_INTERNAL, port->allocated)) {
+ dev_warn(&port->dd->pdev->dev,
+ "Internal command already active\n");
+ return -EBUSY;
+ }
+ port->internal_cmd_in_progress = 1;
+
+ if (atomic == GFP_KERNEL) {
+ /* wait for io to complete if non atomic */
+ if (mtip_quiesce_io(port, 5000) < 0) {
+ dev_warn(&port->dd->pdev->dev,
+ "Failed to quiesce IO\n");
+ release_slot(port, MTIP_TAG_INTERNAL);
+ port->internal_cmd_in_progress = 0;
+ return -EBUSY;
+ }
+
+ /* Set the completion function and data for the command.
*/
+ int_cmd->comp_data = &wait;
+ int_cmd->comp_func = mtip_completion;
+
+ } else {
+ /* Clear completion - we're going to poll */
+ int_cmd->comp_data = NULL;
+ int_cmd->comp_func = NULL;
+ }
+
+ /* Copy the command to the command table */
+ memcpy(int_cmd->command, fis, fisLen*4);
+
+ /* Populate the SG list */
+ int_cmd->command_header->opts =
+ cpu_to_le32(opts | fisLen);
+ if (bufLen) {
+ command_sg = int_cmd->command + HW_CMD_TBL_HDR_SZ;
+
+ command_sg->info = cpu_to_le32((bufLen-1) & 0x3fffff);
+ command_sg->dba = cpu_to_le32(buffer & 0xffffffff);
+ command_sg->dba_upper = cpu_to_le32((buffer >> 16) >>
16);
+
+ int_cmd->command_header->opts |= cpu_to_le32((1 << 16));
+ }
+
+ /* Populate the command header */
+ int_cmd->command_header->byte_count = 0;
+
+ /* Issue the command to the hardware */
+ mtip_issue_non_ncq_command(port, MTIP_TAG_INTERNAL);
+
+ /* Poll if atomic, wait_for_completion otherwise */
+ if (atomic == GFP_KERNEL) {
+ /* Wait for the command to complete or timeout. */
+ if (wait_for_completion_timeout(
+ &wait,
+ msecs_to_jiffies(timeout)) == 0) {
+ dev_err(&port->dd->pdev->dev,
+ "Internal command did not complete
[%d]\n",
+ atomic);
+ rv = -EAGAIN;
+ }
+
+ if
(readl(port->cmd_issue[MTIP_TAG_INDEX(MTIP_TAG_INTERNAL)])
+ & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL))) {
+ dev_warn(&port->dd->pdev->dev,
+ "Retiring internal command but CI is
1.\n");
+ }
+
+ } else {
+ /* Spin for <timeout> checking if command still
outstanding */
+ timeout = jiffies + msecs_to_jiffies(timeout);
+
+ while ((readl(
+
port->cmd_issue[MTIP_TAG_INDEX(MTIP_TAG_INTERNAL)])
+ & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL)))
+ && time_before(jiffies, timeout))
+ ;
+
+ if
(readl(port->cmd_issue[MTIP_TAG_INDEX(MTIP_TAG_INTERNAL)])
+ & (1 << MTIP_TAG_BIT(MTIP_TAG_INTERNAL))) {
+ dev_err(&port->dd->pdev->dev,
+ "Internal command did not complete
[%d]\n",
+ atomic);
+ rv = -EAGAIN;
+ }
+ }
+
+ /* Clear the allocated and active bits for the internal command.
*/
+ atomic_set(&int_cmd->active, 0);
+ release_slot(port, MTIP_TAG_INTERNAL);
+ port->internal_cmd_in_progress = 0;
+
+ return rv;
+}
+
+/*
+ * Byte-swap ATA ID strings.
+ *
+ * ATA identify data contains strings in byte-swapped 16-bit words.
+ * They must be swapped (on all architectures) to be usable as C
strings.
+ * This function swaps bytes in-place.
+ *
+ * @buf The buffer location of the string
+ * @len The number of bytes to swap
+ *
+ * return value
+ * None
+ */
+static inline void ata_swap_string(u16 *buf, unsigned int len)
+{
+ int i;
+ for (i = 0; i < (len/2); i++)
+ be16_to_cpus(&buf[i]);
+}
+
+/*
+ * Request the device identity information.
+ *
+ * If a user space buffer is not specified, i.e. is NULL, the
+ * identify information is still read from the drive and placed
+ * into the identify data buffer (@e port->identify) in the
+ * port data structure.
+ * When the identify buffer contains valid identify information @e
+ * port->identify_valid is non-zero.
+ *
+ * @port Pointer to the port structure.
+ * @user_buffer A user space buffer where the identify data should be
+ * copied.
+ *
+ * return value
+ * 0 Command completed successfully.
+ * -EFAULT An error occurred while coping data to the user buffer.
+ * -1 Command failed.
+ */
+static int mtip_get_identify(struct mtip_port *port, void __user
*user_buffer)
+{
+ int rv = 0;
+ struct host_to_dev_fis fis;
+
+ down_write(&port->dd->internal_sem);
+
+ /* Build the FIS. */
+ memset(&fis, 0, sizeof(struct host_to_dev_fis));
+ fis.type = 0x27;
+ fis.opts = 1 << 7;
+ fis.command = ATA_CMD_ID_ATA;
+
+ /* Set the identify information as invalid. */
+ port->identify_valid = 0;
+
+ /* Clear the identify information. */
+ memset(port->identify, 0, sizeof(u16) * ATA_ID_WORDS);
+
+ /* Execute the command. */
+ if (mtip_exec_internal_command(port,
+ &fis,
+ 5,
+ port->identify_dma,
+ sizeof(u16) * ATA_ID_WORDS,
+ 0,
+ GFP_KERNEL,
+ MTIP_INTERNAL_COMMAND_TIMEOUT_MS)
+ < 0) {
+ rv = -1;
+ goto out;
+ }
+
+ /*
+ * Perform any necessary byte-swapping. Yes, the kernel does in
fact
+ * perform field-sensitive swapping on the string fields.
+ * See the kernel use of ata_id_string() for proof of this.
+ */
+#ifdef __LITTLE_ENDIAN
+ ata_swap_string(port->identify + 27, 40); /* model string*/
+ ata_swap_string(port->identify + 23, 8); /* firmware string*/
+ ata_swap_string(port->identify + 10, 20); /* serial# string*/
+#else
+ {
+ int i;
+ for (i = 0; i < ATA_ID_WORDS; i++)
+ port->identify[i] =
le16_to_cpu(port->identify[i]);
+ }
+#endif
+
+ /* Set the identify buffer as valid. */
+ port->identify_valid = 1;
+
+ if (user_buffer) {
+ if (copy_to_user(
+ user_buffer,
+ port->identify,
+ ATA_ID_WORDS * sizeof(u16))) {
+ rv = -EFAULT;
+ goto out;
+ }
+ }
+
+out:
+ up_write(&port->dd->internal_sem);
+ return rv;
+}
+
+/*
+ * Issue a standby immediate command to the device.
+ *
+ * @port Pointer to the port structure.
+ *
+ * return value
+ * 0 Command was executed successfully.
+ * -1 An error occurred while executing the command.
+ */
+static int mtip_standby_immediate(struct mtip_port *port)
+{
+ int rv;
+ struct host_to_dev_fis fis;
+
+ down_write(&port->dd->internal_sem);
+
+ /* Build the FIS. */
+ memset(&fis, 0, sizeof(struct host_to_dev_fis));
+ fis.type = 0x27;
+ fis.opts = 1 << 7;
+ fis.command = ATA_CMD_STANDBYNOW1;
+
+ /* Execute the command. Use a 15-second timeout for large
drives. */
+ rv = mtip_exec_internal_command(port,
+ &fis,
+ 5,
+ 0,
+ 0,
+ 0,
+ GFP_KERNEL,
+ 15000);
+
+ up_write(&port->dd->internal_sem);
+
+ return rv;
+}
+
+/*
+ * Get the drive capacity.
+ *
+ * @dd Pointer to the device data structure.
+ * @sectors Pointer to the variable that will receive the sector count.
+ *
+ * return value
+ * 1 Capacity was returned successfully.
+ * 0 The identify information is invalid.
+ */
+bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors)
+{
+ struct mtip_port *port = dd->port;
+ u64 total, raw0, raw1, raw2, raw3;
+ raw0 = port->identify[100];
+ raw1 = port->identify[101];
+ raw2 = port->identify[102];
+ raw3 = port->identify[103];
+ total = raw0 | raw1<<16 | raw2<<32 | raw3<<48;
+ *sectors = total;
+ return (bool) !!port->identify_valid;
+}
+
+/*
+ * Reset the HBA.
+ *
+ * Resets the HBA by setting the HBA Reset bit in the Global
+ * HBA Control register. After setting the HBA Reset bit the
+ * function waits for 1 second before reading the HBA Reset
+ * bit to make sure it has cleared. If HBA Reset is not clear
+ * an error is returned. Cannot be used in non-blockable
+ * context.
+ *
+ * @dd Pointer to the driver data structure.
+ *
+ * return value
+ * 0 The reset was successful.
+ * -1 The HBA Reset bit did not clear.
+ */
+static int mtip_hba_reset(struct driver_data *dd)
+{
+ mtip_deinit_port(dd->port);
+
+ /* Set the reset bit */
+ writel(HOST_RESET, dd->mmio + HOST_CTRL);
+
+ /* Flush */
+ readl(dd->mmio + HOST_CTRL);
+
+ /* Wait for reset to clear */
+ ssleep(1);
+
+ /* Check the bit has cleared */
+ if (readl(dd->mmio + HOST_CTRL) & HOST_RESET) {
+ dev_err(&dd->pdev->dev,
+ "Reset bit did not clear.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Display the identify command data.
+ *
+ * @port Pointer to the port data structure.
+ *
+ * return value
+ * None
+ */
+static void mtip_dump_identify(struct mtip_port *port)
+{
+ sector_t sectors;
+ unsigned short revid;
+ char cbuf[42];
+
+ if (!port->identify_valid)
+ return;
+
+ strlcpy(cbuf, (char *)(port->identify+10), 21);
+ dev_info(&port->dd->pdev->dev,
+ "Serial No.: %s\n", cbuf);
+
+ strlcpy(cbuf, (char *)(port->identify+23), 9);
+ dev_info(&port->dd->pdev->dev,
+ "Firmware Ver.: %s\n", cbuf);
+
+ strlcpy(cbuf, (char *)(port->identify+27), 41);
+ dev_info(&port->dd->pdev->dev, "Model: %s\n", cbuf);
+
+ if (mtip_hw_get_capacity(port->dd, §ors))
+ dev_info(&port->dd->pdev->dev,
+ "Capacity: %llu sectors (%llu MB)\n",
+ (u64)sectors,
+ ((u64)sectors) * ATA_SECT_SIZE >> 20);
+
+ pci_read_config_word(port->dd->pdev, PCI_REVISION_ID, &revid);
+ switch (revid & 0xff) {
+ case 0x1:
+ strlcpy(cbuf, "A0", 3);
+ break;
+ case 0x3:
+ strlcpy(cbuf, "A2", 3);
+ break;
+ default:
+ strlcpy(cbuf, "?", 2);
+ break;
+ }
+ dev_info(&port->dd->pdev->dev,
+ "Card Type: %s\n", cbuf);
+}
+
+/*
+ * Map the commands scatter list into the command table.
+ *
+ * @command Pointer to the command.
+ * @nents Number of scatter list entries.
+ *
+ * return value
+ * None
+ */
+static inline void fill_command_sg(struct driver_data *dd,
+ struct mtip_cmd *command,
+ int nents)
+{
+ int n;
+ unsigned int dma_len;
+ struct mtip_cmd_sg *command_sg;
+ struct scatterlist *sg = command->sg;
+
+ command_sg = command->command + HW_CMD_TBL_HDR_SZ;
+
+ for (n = 0; n < nents; n++) {
+ dma_len = sg_dma_len(sg);
+ if (dma_len > 0x400000)
+ dev_err(&dd->pdev->dev,
+ "DMA segment length truncated\n");
+ command_sg->info = cpu_to_le32((dma_len-1) & 0x3fffff);
+#if (BITS_PER_LONG == 64)
+ *((unsigned long *) &command_sg->dba) =
+ cpu_to_le64(sg_dma_address(sg));
+#else
+ command_sg->dba = cpu_to_le32(sg_dma_address(sg));
+ command_sg->dba_upper =
+ cpu_to_le32((sg_dma_address(sg) >> 16) >> 16);
+#endif
+ command_sg++;
+ sg++;
+ }
+}
+
+/*
+ * @brief Execute a drive command.
+ *
+ * return value 0 The command completed successfully.
+ * return value -1 An error occurred while executing the command.
+ */
+int exec_drive_task(struct mtip_port *port, u8 *command)
+{
+ struct host_to_dev_fis fis;
+ struct host_to_dev_fis *reply = (port->rxfis + RX_FIS_D2H_REG);
+
+ /* Lock the internal command semaphore. */
+ down_write(&port->dd->internal_sem);
+
+ /* Build the FIS. */
+ memset(&fis, 0, sizeof(struct host_to_dev_fis));
+ fis.type = 0x27;
+ fis.opts = 1 << 7;
+ fis.command = command[0];
+ fis.features = command[1];
+ fis.sect_count = command[2];
+ fis.sector = command[3];
+ fis.cyl_low = command[4];
+ fis.cyl_hi = command[5];
+ fis.device = command[6] & ~0x10; /* Clear the dev bit*/
+
+
+ dbg_printk(MTIP_DRV_NAME "%s: User Command: cmd %x, feat %x, "
+ "nsect %x, sect %x, lcyl %x, "
+ "hcyl %x, sel %x\n",
+ __func__,
+ command[0],
+ command[1],
+ command[2],
+ command[3],
+ command[4],
+ command[5],
+ command[6]);
+
+ /* Execute the command. */
+ if (mtip_exec_internal_command(port,
+ &fis,
+ 5,
+ 0,
+ 0,
+ 0,
+ GFP_KERNEL,
+ MTIP_IOCTL_COMMAND_TIMEOUT_MS) < 0) {
+ up_write(&port->dd->internal_sem);
+ return -1;
+ }
+
+ command[0] = reply->command; /* Status*/
+ command[1] = reply->features; /* Error*/
+ command[4] = reply->cyl_low;
+ command[5] = reply->cyl_hi;
+
+ dbg_printk(MTIP_DRV_NAME "%s: Completion Status: stat %x, "
+ "err %x , cyl_lo %x cyl_hi %x\n",
+ __func__,
+ command[0],
+ command[1],
+ command[4],
+ command[5]);
+
+ up_write(&port->dd->internal_sem);
+ return 0;
+}
+
+/*
+ * @brief Execute a drive command.
+ *
+ * @param port Pointer to the port data structure.
+ * @param command Pointer to the user specified command parameters.
+ * @param user_buffer Pointer to the user space buffer where read
sector
+ * data should be copied.
+ *
+ * return value 0 The command completed successfully.
+ * return value -EFAULT An error occurred while copying the completion
+ * data to the user space buffer.
+ * return value -1 An error occurred while executing the command.
+ */
+int exec_drive_command(struct mtip_port *port, u8 *command,
+ void __user *user_buffer)
+{
+ struct host_to_dev_fis fis;
+ struct host_to_dev_fis *reply = (port->rxfis + RX_FIS_D2H_REG);
+
+ /* Lock the internal command semaphore. */
+ down_write(&port->dd->internal_sem);
+
+ /* Build the FIS. */
+ memset(&fis, 0, sizeof(struct host_to_dev_fis));
+ fis.type = 0x27;
+ fis.opts = 1 << 7;
+ fis.command = command[0];
+ fis.features = command[2];
+ fis.sect_count = command[3];
+ if (fis.command == WIN_SMART) {
+ fis.sector = command[1];
+ fis.cyl_low = 0x4f;
+ fis.cyl_hi = 0xc2;
+ }
+
+ dbg_printk(MTIP_DRV_NAME
+ "%s: User Command: cmd %x, sect %x, "
+ "feat %x, sectcnt %x\n",
+ __func__,
+ command[0],
+ command[1],
+ command[2],
+ command[3]);
+
+ memset(port->sector_buffer, 0x00, ATA_SECT_SIZE);
+
+ /* Execute the command. */
+ if (mtip_exec_internal_command(port,
+ &fis,
+ 5,
+ port->sector_buffer_dma,
+ (command[3] != 0) ? ATA_SECT_SIZE : 0,
+ 0,
+ GFP_KERNEL,
+ MTIP_IOCTL_COMMAND_TIMEOUT_MS)
+ < 0) {
+ up_write(&port->dd->internal_sem);
+ return -1;
+ }
+
+ /* Collect the completion status. */
+ command[0] = reply->command; /* Status*/
+ command[1] = reply->features; /* Error*/
+ command[2] = command[3];
+
+ dbg_printk(MTIP_DRV_NAME
+ "%s: Completion Status: stat %x, "
+ "err %x, cmd %x\n",
+ __func__,
+ command[0],
+ command[1],
+ command[2]);
+
+ if (user_buffer && command[3]) {
+ if (copy_to_user(user_buffer,
+ port->sector_buffer,
+ ATA_SECT_SIZE * command[3])) {
+ up_write(&port->dd->internal_sem);
+ return -EFAULT;
+ }
+ }
+
+ up_write(&port->dd->internal_sem);
+ return 0;
+}
+
+/*
+ * Indicates whether a command has a single sector payload.
+ *
+ * @command passed to the device to perform the certain event.
+ * @features passed to the device to perform the certain event.
+ *
+ * return value
+ * 1 command is one that always has a single sector payload,
+ * regardless of the value in the Sector Count field.
+ * 0 otherwise
+ *
+ */
+static unsigned int implicit_sector(unsigned char command,
+ unsigned char features)
+{
+ unsigned int rv = 0;
+
+ /* list of commands that have an implicit sector count of 1 */
+ switch (command) {
+ case 0xF1:
+ case 0xF2:
+ case 0xF3:
+ case 0xF4:
+ case 0xF5:
+ case 0xF6:
+ case 0xE4:
+ case 0xE8:
+ rv = 1;
+ break;
+ case 0xF9:
+ if (features == 0x03)
+ rv = 1;
+ break;
+ case 0xB0:
+ if ((features == 0xD0) || (features == 0xD1))
+ rv = 1;
+ break;
+ case 0xB1:
+ if ((features == 0xC2) || (features == 0xC3))
+ rv = 1;
+ break;
+ }
+ return rv;
+}
+
+/*
+ * Executes a taskfile
+ * See ide_taskfile_ioctl() for derivation
+ */
+static int exec_drive_taskfile(struct driver_data *dd,
+ unsigned long arg,
+ unsigned char compat)
+{
+ struct host_to_dev_fis fis;
+ struct host_to_dev_fis *reply;
+ ide_task_request_t *req_task;
+ u8 *outbuf = NULL;
+ u8 *inbuf = NULL;
+ dma_addr_t outbuf_dma = (dma_addr_t)NULL;
+ dma_addr_t inbuf_dma = (dma_addr_t)NULL;
+ dma_addr_t dma_buffer = (dma_addr_t)NULL;
+ int err = 0;
+ int tasksize = sizeof(struct ide_task_request_s);
+ unsigned int taskin = 0;
+ unsigned int taskout = 0;
+ u8 nsect = 0;
+ char __user *buf = (char __user *)arg;
+ unsigned int timeout = MTIP_IOCTL_COMMAND_TIMEOUT_MS;
+ unsigned int force_single_sector;
+ unsigned int transfer_size;
+ unsigned long task_file_data;
+ int intotal, outtotal;
+ struct mtip_compat_ide_task_request_s *compat_req_task = NULL;
+ int compat_tasksize = sizeof(struct
mtip_compat_ide_task_request_s);
+
+ req_task = kzalloc(tasksize, GFP_KERNEL);
+ if (req_task == NULL)
+ return -ENOMEM;
+
+ if (compat == 1) {
+ compat_req_task =
+ (struct mtip_compat_ide_task_request_s __user *)
arg;
+
+ if (copy_from_user(req_task, buf,
+ compat_tasksize -
+ (2 * sizeof(compat_long_t)))) {
+ err = -EFAULT;
+ goto abort;
+ }
+
+ if (get_user(req_task->out_size,
&compat_req_task->out_size)) {
+ err = -EFAULT;
+ goto abort;
+ }
+
+ if (get_user(req_task->in_size,
&compat_req_task->in_size)) {
+ err = -EFAULT;
+ goto abort;
+ }
+
+ outtotal = compat_tasksize;
+ intotal = compat_tasksize + req_task->out_size;
+ } else {
+ if (copy_from_user(req_task, buf, tasksize)) {
+ kfree(req_task);
+ err = -EFAULT;
+ goto abort;
+ }
+
+ outtotal = tasksize;
+ intotal = tasksize + req_task->out_size;
+ }
+
+ taskout = req_task->out_size;
+ taskin = req_task->in_size;
+ /* 130560 = 512 * 0xFF*/
+ if (taskin > 130560 || taskout > 130560) {
+ err = -EINVAL;
+ goto abort;
+ }
+
+ if (taskout) {
+ outbuf = kzalloc(taskout, GFP_KERNEL);
+ if (outbuf == NULL) {
+ err = -ENOMEM;
+ goto abort;
+ }
+ if (copy_from_user(outbuf, buf + outtotal, taskout)) {
+ err = -EFAULT;
+ goto abort;
+ }
+ outbuf_dma = pci_map_single(dd->pdev,
+ outbuf,
+ taskout,
+ DMA_TO_DEVICE);
+ if (outbuf_dma == (dma_addr_t)NULL) {
+ err = -ENOMEM;
+ goto abort;
+ }
+ dma_buffer = outbuf_dma;
+ }
+
+ if (taskin) {
+ inbuf = kzalloc(taskin, GFP_KERNEL);
+ if (inbuf == NULL) {
+ err = -ENOMEM;
+ goto abort;
+ }
+
+ if (copy_from_user(inbuf, buf + intotal, taskin)) {
+ err = -EFAULT;
+ goto abort;
+ }
+ inbuf_dma = pci_map_single(dd->pdev,
+ inbuf,
+ taskin, DMA_FROM_DEVICE);
+ if (inbuf_dma == (dma_addr_t)NULL) {
+ err = -ENOMEM;
+ goto abort;
+ }
+ dma_buffer = inbuf_dma;
+ }
+
+ /* only supports PIO and non-data commands from this ioctl. */
+ switch (req_task->data_phase) {
+ case TASKFILE_OUT:
+ nsect = taskout / ATA_SECT_SIZE;
+ reply = (dd->port->rxfis + RX_FIS_PIO);
+ break;
+ case TASKFILE_IN:
+ reply = (dd->port->rxfis + RX_FIS_PIO);
+ break;
+ case TASKFILE_NO_DATA:
+ reply = (dd->port->rxfis + RX_FIS_D2H_REG);
+ break;
+ default:
+ err = -EINVAL;
+ goto abort;
+ }
+
+ /* Lock the internal command semaphore. */
+ down_write(&dd->internal_sem);
+
+ /* Build the FIS. */
+ memset(&fis, 0, sizeof(struct host_to_dev_fis));
+
+ fis.type = 0x27;
+ fis.opts = 1 << 7;
+ fis.command = req_task->io_ports[7];
+ fis.features = req_task->io_ports[1];
+ fis.sect_count = req_task->io_ports[2];
+ fis.lba_low = req_task->io_ports[3];
+ fis.lba_mid = req_task->io_ports[4];
+ fis.lba_hi = req_task->io_ports[5];
+ /* Clear the dev bit*/
+ fis.device = req_task->io_ports[6] & ~0x10;
+
+ if ((req_task->in_flags.all == 0) && (req_task->out_flags.all &
1)) {
+ req_task->in_flags.all =
+ IDE_TASKFILE_STD_IN_FLAGS |
+ (IDE_HOB_STD_IN_FLAGS << 8);
+ fis.lba_low_ex = req_task->hob_ports[3];
+ fis.lba_mid_ex = req_task->hob_ports[4];
+ fis.lba_hi_ex = req_task->hob_ports[5];
+ fis.features_ex = req_task->hob_ports[1];
+ fis.sect_cnt_ex = req_task->hob_ports[2];
+
+ } else {
+ req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS;
+ }
+
+ force_single_sector = implicit_sector(fis.command,
fis.features);
+
+ if ((taskin || taskout) && (!fis.sect_count)) {
+ if (nsect)
+ fis.sect_count = nsect;
+ else {
+ if (!force_single_sector) {
+ dev_warn(&dd->pdev->dev,
+ "data movement but "
+ "sect_count is 0\n");
+ up_write(&dd->internal_sem);
+ err = -EINVAL;
+ goto abort;
+ }
+ }
+ }
+
+ dbg_printk(MTIP_DRV_NAME
+ "taskfile: cmd %x, feat %x, nsect %x,"
+ " sect/lbal %x, lcyl/lbam %x, hcyl/lbah %x,"
+ " head/dev %x\n",
+ fis.command,
+ fis.features,
+ fis.sect_count,
+ fis.lba_low,
+ fis.lba_mid,
+ fis.lba_hi,
+ fis.device);
+
+ switch (fis.command) {
+ case 0x92: /* Change timeout for Download Microcode to 60
seconds.*/
+ timeout = 60000;
+ break;
+ case 0xf4: /* Change timeout for Security Erase Unit to 4
minutes.*/
+ timeout = 240000;
+ break;
+ case 0xe0: /* Change timeout for standby immediate to 10
seconds.*/
+ timeout = 10000;
+ break;
+ case 0xf7: /* Change timeout for vendor unique command to 10
secs */
+ timeout = 10000;
+ break;
+ case 0xfa: /* Change timeout for vendor unique command to 10
secs */
+ timeout = 10000;
+ break;
+ default:
+ timeout = MTIP_IOCTL_COMMAND_TIMEOUT_MS;
+ break;
+ }
+
+ /* Determine the correct transfer size.*/
+ if (force_single_sector)
+ transfer_size = ATA_SECT_SIZE;
+ else
+ transfer_size = ATA_SECT_SIZE * fis.sect_count;
+
+ /* Execute the command.*/
+ if (mtip_exec_internal_command(dd->port,
+ &fis,
+ 5,
+ dma_buffer,
+ transfer_size,
+ 0,
+ GFP_KERNEL,
+ timeout) < 0) {
+ up_write(&dd->internal_sem);
+ err = -EIO;
+ goto abort;
+ }
+
+ task_file_data = readl(dd->port->mmio+PORT_TFDATA);
+
+ if ((req_task->data_phase == TASKFILE_IN) && !(task_file_data &
1)) {
+ reply = dd->port->rxfis + RX_FIS_PIO;
+ req_task->io_ports[7] = reply->control;
+ } else {
+ reply = dd->port->rxfis + RX_FIS_D2H_REG;
+ req_task->io_ports[7] = reply->command;
+ }
+
+ /* reclaim the DMA buffers.*/
+ if (inbuf_dma)
+ pci_unmap_single(dd->pdev, inbuf_dma,
+ taskin, DMA_FROM_DEVICE);
+ if (outbuf_dma)
+ pci_unmap_single(dd->pdev, outbuf_dma,
+ taskout, DMA_TO_DEVICE);
+ inbuf_dma = (dma_addr_t) NULL;
+ outbuf_dma = (dma_addr_t) NULL;
+
+ /* return the ATA registers to the caller.*/
+ req_task->io_ports[1] = reply->features;
+ req_task->io_ports[2] = reply->sect_count;
+ req_task->io_ports[3] = reply->lba_low;
+ req_task->io_ports[4] = reply->lba_mid;
+ req_task->io_ports[5] = reply->lba_hi;
+ req_task->io_ports[6] = reply->device;
+
+ if (req_task->out_flags.all & 1) {
+
+ req_task->hob_ports[3] = reply->lba_low_ex;
+ req_task->hob_ports[4] = reply->lba_mid_ex;
+ req_task->hob_ports[5] = reply->lba_hi_ex;
+ req_task->hob_ports[1] = reply->features_ex;
+ req_task->hob_ports[2] = reply->sect_cnt_ex;
+ }
+
+ dbg_printk(MTIP_DRV_NAME
+ "%s: Completion: stat %x,"
+ "err %x, sect_cnt %x, lbalo %x,"
+ "lbamid %x, lbahi %x, dev %x\n",
+ __func__,
+ req_task->io_ports[7],
+ req_task->io_ports[1],
+ req_task->io_ports[2],
+ req_task->io_ports[3],
+ req_task->io_ports[4],
+ req_task->io_ports[5],
+ req_task->io_ports[6]);
+
+ up_write(&dd->internal_sem);
+
+ if (compat == 1) {
+ if (copy_to_user(buf, req_task,
+ compat_tasksize -
+ (2 * sizeof(compat_long_t)))) {
+ err = -EFAULT;
+ goto abort;
+ }
+ if (put_user(req_task->out_size,
+ &compat_req_task->out_size)) {
+ err = -EFAULT;
+ goto abort;
+ }
+ if (put_user(req_task->in_size,
&compat_req_task->in_size)) {
+ err = -EFAULT;
+ goto abort;
+ }
+ } else {
+ if (copy_to_user(buf, req_task, tasksize)) {
+ err = -EFAULT;
+ goto abort;
+ }
+ }
+ if (taskout) {
+ if (copy_to_user(buf + outtotal, outbuf, taskout)) {
+ err = -EFAULT;
+ goto abort;
+ }
+ }
+ if (taskin) {
+ if (copy_to_user(buf + intotal, inbuf, taskin)) {
+ err = -EFAULT;
+ goto abort;
+ }
+ }
+abort:
+ if (inbuf_dma)
+ pci_unmap_single(dd->pdev, inbuf_dma,
+ taskin, DMA_FROM_DEVICE);
+ if (outbuf_dma)
+ pci_unmap_single(dd->pdev, outbuf_dma,
+ taskout, DMA_TO_DEVICE);
+ kfree(req_task);
+ kfree(outbuf);
+ kfree(inbuf);
+
+ return err;
+}
+
+/*
+ * Handle IOCTL calls from the Block Layer.
+ *
+ * This function is called by the Block Layer when it receives an IOCTL
+ * command that it does not understand. If the IOCTL command is not
supported
+ * this function returns -ENOTTY.
+ *
+ * @dd Pointer to the driver data structure.
+ * @cmd IOCTL command passed from the Block Layer.
+ * @arg IOCTL argument passed from the Block Layer.
+ *
+ * return value
+ * 0 The IOCTL completed successfully.
+ * -ENOTTY The specified command is not supported.
+ * -EFAULT An error occurred copying data to a user space buffer.
+ * -EIO An error occurred while executing the command.
+ */
+int mtip_hw_ioctl(struct driver_data *dd,
+ unsigned int cmd,
+ unsigned long arg,
+ unsigned char compat)
+{
+ switch (cmd) {
+ case HDIO_GET_IDENTITY:
+ if (mtip_get_identify(dd->port, (void __user *) arg) <
0) {
+ dev_warn(&dd->pdev->dev,
+ "Unable to read identity\n");
+ return -EIO;
+ }
+
+ break;
+ case HDIO_DRIVE_CMD:
+ {
+ u8 drive_command[4];
+
+ /* Copy the user command info to our buffer. */
+ if (copy_from_user(drive_command,
+ (void __user *) arg,
+ sizeof(drive_command)))
+ return -EFAULT;
+
+ /* Execute the drive command. */
+ if (exec_drive_command(dd->port,
+ drive_command,
+ (void __user *) (arg+4)))
+ return -EIO;
+
+ /* Copy the status back to the users buffer. */
+ if (copy_to_user((void __user *) arg,
+ drive_command,
+ sizeof(drive_command)))
+ return -EFAULT;
+
+ break;
+ }
+ case HDIO_DRIVE_TASK:
+ {
+ u8 drive_command[7];
+
+ /* Copy the user command info to our buffer. */
+ if (copy_from_user(drive_command,
+ (void __user *) arg,
+ sizeof(drive_command)))
+ return -EFAULT;
+
+ /* Execute the drive command. */
+ if (exec_drive_task(dd->port, drive_command))
+ return -EIO;
+
+ /* Copy the status back to the users buffer. */
+ if (copy_to_user((void __user *) arg,
+ drive_command,
+ sizeof(drive_command)))
+ return -EFAULT;
+
+ break;
+ }
+ case HDIO_DRIVE_TASKFILE:
+ return exec_drive_taskfile(dd, arg, compat);
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * Submit an IO to the hw
+ *
+ * This function is called by the block layer to issue an io
+ * to the device. Upon completion, the callback function will
+ * be called with the data parameter passed as the callback data.
+ *
+ * @dd Pointer to the driver data structure.
+ * @start First sector to read.
+ * @nsect Number of sectors to read.
+ * @nents Number of entries in scatter list for the read command.
+ * @tag The tag of this read command.
+ * @callback Pointer to the function that should be called
+ * when the read completes.
+ * @data Callback data passed to the callback function
+ * when the read completes.
+ * @barrier If non-zero, this command must be completed before
+ * issuing any other commands.
+ * @dir Direction (read or write)
+ *
+ * return value
+ * None
+ */
+void mtip_hw_submit_io(struct driver_data *dd,
+ sector_t start,
+ int nsect,
+ int nents,
+ int tag,
+ void *callback,
+ void *data,
+ int barrier,
+ int dir)
+{
+ struct host_to_dev_fis *fis;
+ struct mtip_port *port = dd->port;
+ struct mtip_cmd *command = &port->commands[tag];
+
+ /* Map the scatter list for DMA access */
+ if (dir == READ)
+ nents = dma_map_sg(&dd->pdev->dev, command->sg,
+ nents, DMA_FROM_DEVICE);
+ else
+ nents = dma_map_sg(&dd->pdev->dev, command->sg,
+ nents, DMA_TO_DEVICE);
+
+ command->scatter_ents = nents;
+
+ /*
+ * The number of retries for this command before it is
+ * reported as a failure to the upper layers.
+ */
+ command->retries = MTIP_MAX_RETRIES;
+
+ /* Fill out fis */
+ fis = command->command;
+ fis->type = 0x27;
+ fis->opts = 1 << 7;
+ fis->command =
+ (dir == READ ? ATA_CMD_FPDMA_READ :
ATA_CMD_FPDMA_WRITE);
+ *((unsigned int *) &fis->lba_low) = (start & 0xffffff);
+ *((unsigned int *) &fis->lba_low_ex) = ((start >> 24) &
0xffffff);
+ fis->device = 1 << 6;
+ if (barrier)
+ fis->device |= FUA_BIT;
+ fis->features = nsect & 0xff;
+ fis->features_ex = (nsect >> 8) & 0xff;
+ fis->sect_count = ((tag << 3) | (tag >> 5));
+ fis->sect_cnt_ex = 0;
+ fis->control = 0;
+ fis->res2 = 0;
+ fis->res3 = 0;
+ fill_command_sg(dd, command, nents);
+
+ /* Populate the command header */
+ command->command_header->opts = cpu_to_le32(
+ (nents << 16) | 5 | HW_CMD_PREFETCH);
+ command->command_header->byte_count = 0;
+
+ /*
+ * Set the completion function and data for the command
+ * within this layer.
+ */
+ command->comp_data = dd;
+ command->comp_func = mtip_async_complete;
+ command->direction = (dir == READ ? DMA_FROM_DEVICE :
DMA_TO_DEVICE);
+
+ /*
+ * Set the completion function and data for the command passed
+ * from the upper layer.
+ */
+ command->async_data = data;
+ command->async_callback = callback;
+
+ /*
+ * Lock used to prevent this command from being issued
+ * if an internal command is in progress.
+ */
+ down_read(&port->dd->internal_sem);
+
+ /* Issue the command to the hardware */
+ mtip_issue_ncq_command(port, tag);
+
+ /* Set the command's timeout value.*/
+ port->commands[tag].comp_time = jiffies + msecs_to_jiffies(
+ MTIP_NCQ_COMMAND_TIMEOUT_MS);
+
+ up_read(&port->dd->internal_sem);
+}
+
+/*
+ * Release a command slot.
+ *
+ * @dd Pointer to the driver data structure.
+ * @tag Slot tag
+ *
+ * return value
+ * None
+ */
+void mtip_hw_release_scatterlist(struct driver_data *dd, int tag)
+{
+ release_slot(dd->port, tag);
+}
+
+/*
+ * Obtain a command slot and return its associated scatter list.
+ *
+ * @dd Pointer to the driver data structure.
+ * @tag Pointer to an int that will receive the allocated command
+ * slot tag.
+ *
+ * return value
+ * Pointer to the scatter list for the allocated command slot
+ * or NULL if no command slots are available.
+ */
+struct scatterlist *mtip_hw_get_scatterlist(struct driver_data *dd,
+ int *tag)
+{
+ /*
+ * It is possible that, even with this semaphore, a thread
+ * may think that no command slots are available. Therefore, we
+ * need to make an attempt to get_slot().
+ */
+ down(&dd->port->cmd_slot);
+ *tag = get_slot(dd->port);
+
+ if (unlikely(*tag < 0))
+ return NULL;
+
+ return dd->port->commands[*tag].sg;
+}
+
+/*
+ * Sysfs register/status dump.
+ *
+ * @dev Pointer to the device structure, passed by the kernrel.
+ * @attr Pointer to the device_attribute structure passed by the
kernel.
+ * @buf Pointer to the char buffer that will receive the stats info.
+ *
+ * return value
+ * The size, in bytes, of the data copied into buf.
+ */
+static ssize_t hw_show_registers(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ u32 group_allocated;
+ struct driver_data *dd = dev_to_disk(dev)->private_data;
+ int size = 0;
+ int n;
+
+ size += sprintf(&buf[size], "%s:\ns_active:\n", __func__);
+
+ for (n = 0; n < dd->slot_groups; n++)
+ size += sprintf(&buf[size], "0x%08x\n",
+ readl(dd->port->s_active[n]));
+
+ size += sprintf(&buf[size], "Command Issue:\n");
+
+ for (n = 0; n < dd->slot_groups; n++)
+ size += sprintf(&buf[size], "0x%08x\n",
+ readl(dd->port->cmd_issue[n]));
+
+ size += sprintf(&buf[size], "Allocated:\n");
+
+ for (n = 0; n < dd->slot_groups; n++) {
+ if (sizeof(long) > sizeof(u32))
+ group_allocated =
+ dd->port->allocated[n/2] >> (32*(n&1));
+ else
+ group_allocated = dd->port->allocated[n];
+ size += sprintf(&buf[size], "0x%08x\n",
+ group_allocated);
+ }
+
+ size += sprintf(&buf[size], "completed:\n");
+
+ for (n = 0; n < dd->slot_groups; n++)
+ size += sprintf(&buf[size], "0x%08x\n",
+ readl(dd->port->completed[n]));
+
+ size += sprintf(&buf[size], "PORT_IRQ_STAT 0x%08x\n",
+ readl(dd->port->mmio + PORT_IRQ_STAT));
+ size += sprintf(&buf[size], "HOST_IRQ_STAT 0x%08x\n",
+ readl(dd->mmio + HOST_IRQ_STAT));
+
+ return size;
+}
+static DEVICE_ATTR(registers, S_IRUGO, hw_show_registers, NULL);
+
+/*
+ * Create the sysfs related attributes.
+ *
+ * @dd Pointer to the driver data structure.
+ * @kobj Pointer to the kobj for the block device.
+ *
+ * return value
+ * 0 Operation completed successfully.
+ * -EINVAL Invalid parameter.
+ */
+int mtip_hw_sysfs_init(struct driver_data *dd, struct kobject *kobj)
+{
+ if (!kobj || !dd)
+ return -EINVAL;
+
+ if (sysfs_create_file(kobj, &dev_attr_registers.attr))
+ dev_warn(&dd->pdev->dev,
+ "Error creating registers sysfs entry\n");
+ return 0;
+}
+
+/*
+ * Remove the sysfs related attributes.
+ *
+ * @dd Pointer to the driver data structure.
+ * @kobj Pointer to the kobj for the block device.
+ *
+ * return value
+ * 0 Operation completed successfully.
+ * -EINVAL Invalid parameter.
+ */
+int mtip_hw_sysfs_exit(struct driver_data *dd, struct kobject *kobj)
+{
+ if (!kobj || !dd)
+ return -EINVAL;
+
+ sysfs_remove_file(kobj, &dev_attr_registers.attr);
+
+ return 0;
+}
+
+/*
+ * Perform any init/resume time hardware setup
+ *
+ * @dd Pointer to the driver data structure.
+ *
+ * return value
+ * None
+ */
+static inline void hba_setup(struct driver_data *dd)
+{
+ u32 hwdata;
+ hwdata = readl(dd->mmio + HOST_HSORG);
+
+ /* interrupt bug workaround: use only 1 IS bit.*/
+ writel(hwdata |
+ HSORG_DISABLE_SLOTGRP_INTR |
+ HSORG_DISABLE_SLOTGRP_PXIS,
+ dd->mmio + HOST_HSORG);
+}
+
+/*
+ * Detect the details of the product, and store anything needed
+ * into the driver data structure. This includes product type and
+ * version and number of slot groups.
+ *
+ * @dd Pointer to the driver data structure.
+ *
+ * return value
+ * None
+ */
+static void mtip_detect_product(struct driver_data *dd)
+{
+ u32 hwdata;
+ unsigned int rev, slotgroups;
+
+ /*
+ * HBA base + 0xFC [15:0] - vendor-specific hardware interface
+ * info register:
+ * [15:8] hardware/software interface rev#
+ * [ 3] asic-style interface
+ * [ 2:0] number of slot groups, minus 1 (only valid for
asic-style).
+ */
+ hwdata = readl(dd->mmio + HOST_HSORG);
+
+ dd->product_type = MTIP_PRODUCT_UNKNOWN;
+ dd->slot_groups = 1;
+
+ if (hwdata & 0x8) {
+ dd->product_type = MTIP_PRODUCT_ASICFPGA;
+ rev = (hwdata & HSORG_HWREV) >> 8;
+ slotgroups = (hwdata & HSORG_SLOTGROUPS) + 1;
+ dev_info(&dd->pdev->dev,
+ "ASIC-FPGA design, HS rev 0x%x, "
+ "%i slot groups [%i slots]\n",
+ rev,
+ slotgroups,
+ slotgroups * 32);
+
+ if (slotgroups > MTIP_MAX_SLOT_GROUPS) {
+ dev_warn(&dd->pdev->dev,
+ "Warning: driver only supports "
+ "%i slot groups.\n",
MTIP_MAX_SLOT_GROUPS);
+ slotgroups = MTIP_MAX_SLOT_GROUPS;
+ }
+ dd->slot_groups = slotgroups;
+ return;
+ }
+
+ dev_warn(&dd->pdev->dev, "Unrecognized product id\n");
+}
+
+/*
+ * Blocking wait for FTL rebuild to complete
+ *
+ * @dd Pointer to the DRIVER_DATA structure.
+ *
+ * return value
+ * 0 FTL rebuild completed successfully
+ * -EFAULT FTL rebuild error/timeout/interruption
+ */
+static int mtip_ftl_rebuild_poll(struct driver_data *dd)
+{
+ unsigned long timeout, cnt = 0, start;
+
+ dev_warn(&dd->pdev->dev,
+ "FTL rebuild in progress. Polling for completion.\n");
+
+ start = jiffies;
+ dd->ftlrebuildflag = 1;
+ timeout = jiffies +
msecs_to_jiffies(MTIP_FTL_REBUILD_TIMEOUT_MS);
+
+ do {
+#ifdef CONFIG_HOTPLUG
+ if (mtip_check_surprise_removal(dd->pdev))
+ return -EFAULT;
+#endif
+ if (mtip_get_identify(dd->port, NULL) < 0)
+ return -EFAULT;
+
+ if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) ==
+ MTIP_FTL_REBUILD_MAGIC) {
+ ssleep(1);
+ /* Print message every 3 minutes */
+ if (cnt++ >= 180) {
+ dev_warn(&dd->pdev->dev,
+ "FTL rebuild in progress (%d secs).\n",
+ jiffies_to_msecs(jiffies - start) /
1000);
+ cnt = 0;
+ }
+ } else {
+ dev_warn(&dd->pdev->dev,
+ "FTL rebuild complete (%d secs).\n",
+ jiffies_to_msecs(jiffies - start) / 1000);
+ dd->ftlrebuildflag = 0;
+ break;
+ }
+ } while (time_before(jiffies, timeout));
+
+ /* Check for timeout */
+ if (dd->ftlrebuildflag) {
+ dev_err(&dd->pdev->dev,
+ "Timed out waiting for FTL rebuild to complete (%d
secs).\n",
+ jiffies_to_msecs(jiffies - start) / 1000);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+/*
+ * Called once for each card.
+ *
+ * @dd Pointer to the driver data structure.
+ *
+ * return value
+ * 0 on success, else an error code.
+ */
+int mtip_hw_init(struct driver_data *dd)
+{
+ int i;
+ int rv;
+ unsigned int num_command_slots;
+
+ dd->mmio = pcim_iomap_table(dd->pdev)[MTIP_ABAR];
+
+ mtip_detect_product(dd);
+ if (dd->product_type == MTIP_PRODUCT_UNKNOWN) {
+ rv = -EIO;
+ goto out1;
+ }
+ num_command_slots = dd->slot_groups * 32;
+
+ hba_setup(dd);
+
+ /*
+ * Initialize the internal semaphore
+ * Use a rw semaphore to enable prioritization of
+ * mgmnt ioctl traffic during heavy IO load
+ */
+ init_rwsem(&dd->internal_sem);
+
+#ifdef MTIP_USE_TASKLET
+ tasklet_init(&dd->tasklet, mtip_tasklet, (unsigned long)dd);
+#endif
+
+ dd->port = kzalloc(sizeof(struct mtip_port), GFP_KERNEL);
+ if (!dd->port) {
+ dev_err(&dd->pdev->dev,
+ "Memory allocation: port structure\n");
+ return -ENOMEM;
+ }
+
+ /* Counting semaphore to track command slot usage */
+ sema_init(&dd->port->cmd_slot, num_command_slots - 1);
+
+ /* Spinlock to prevent concurrent issue */
+ spin_lock_init(&dd->port->cmd_issue_lock);
+
+ /* Set the port mmio base address. */
+ dd->port->mmio = dd->mmio + PORT_OFFSET;
+ dd->port->dd = dd;
+
+ /* Allocate memory for the command list. */
+ dd->port->command_list =
+ dmam_alloc_coherent(&dd->pdev->dev,
+ HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2),
+ &dd->port->command_list_dma,
+ GFP_KERNEL);
+ if (!dd->port->command_list) {
+ dev_err(&dd->pdev->dev,
+ "Memory allocation: command list\n");
+ rv = -ENOMEM;
+ goto out1;
+ }
+
+ /* Clear the memory we have allocated. */
+ memset(dd->port->command_list,
+ 0,
+ HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2));
+
+ /* Setup the addresse of the RX FIS. */
+ dd->port->rxfis = dd->port->command_list + HW_CMD_SLOT_SZ;
+ dd->port->rxfis_dma = dd->port->command_list_dma +
HW_CMD_SLOT_SZ;
+
+ /* Setup the address of the command tables. */
+ dd->port->command_table = dd->port->rxfis + HW_RX_FIS_SZ;
+ dd->port->command_tbl_dma = dd->port->rxfis_dma + HW_RX_FIS_SZ;
+
+ /* Setup the address of the identify data. */
+ dd->port->identify = dd->port->command_table +
+ HW_CMD_TBL_AR_SZ;
+ dd->port->identify_dma = dd->port->command_tbl_dma +
+ HW_CMD_TBL_AR_SZ;
+
+ /* Setup the address of the sector buffer. */
+ dd->port->sector_buffer = (void *) dd->port->identify +
ATA_SECT_SIZE;
+ dd->port->sector_buffer_dma = dd->port->identify_dma +
ATA_SECT_SIZE;
+
+ /* Point the command headers at the command tables. */
+ for (i = 0; i < num_command_slots; i++) {
+ dd->port->commands[i].command_header =
+ dd->port->command_list +
+ (sizeof(struct mtip_cmd_hdr) *
i);
+ dd->port->commands[i].command_header_dma =
+ dd->port->command_list_dma +
+ (sizeof(struct mtip_cmd_hdr) *
i);
+
+ dd->port->commands[i].command =
+ dd->port->command_table + (HW_CMD_TBL_SZ * i);
+ dd->port->commands[i].command_dma =
+ dd->port->command_tbl_dma + (HW_CMD_TBL_SZ * i);
+
+ if (readl(dd->mmio + HBA_CAPS) & HOST_CAP_64)
+ dd->port->commands[i].command_header->ctbau =
+ cpu_to_le32(
+ (dd->port->commands[i].command_dma >> 16) >>
16);
+ dd->port->commands[i].command_header->ctba =
cpu_to_le32(
+ dd->port->commands[i].command_dma & 0xffffffff);
+
+ /*
+ * If this is not done, a bug is reported by the stock
+ * FC11 i386. Due to the fact that it has lots of kernel
+ * debugging enabled.
+ */
+ sg_init_table(dd->port->commands[i].sg, MTIP_MAX_SG);
+
+ /* Mark all commands as currently inactive.*/
+ atomic_set(&dd->port->commands[i].active, 0);
+ }
+
+ /* Setup the pointers to the extended s_active and CI registers.
*/
+ for (i = 0; i < dd->slot_groups; i++) {
+ dd->port->s_active[i] =
+ dd->port->mmio + i*0x80 + PORT_SACTIVE;
+ dd->port->cmd_issue[i] =
+ dd->port->mmio + i*0x80 + PORT_COMMAND_ISSUE;
+ dd->port->completed[i] =
+ dd->port->mmio + i*0x80 + PORT_SDBV;
+ }
+
+ /* Reset the HBA. */
+ if (mtip_hba_reset(dd) < 0) {
+ dev_err(&dd->pdev->dev,
+ "Card did not reset within timeout\n");
+ rv = -EIO;
+ goto out2;
+ }
+
+ mtip_init_port(dd->port);
+ mtip_start_port(dd->port);
+
+ /* Setup the ISR and enable interrupts. */
+ rv = devm_request_irq(&dd->pdev->dev,
+ dd->pdev->irq,
+ mtip_irq_handler,
+ IRQF_SHARED,
+ dev_driver_string(&dd->pdev->dev),
+ dd);
+
+ if (rv) {
+ dev_err(&dd->pdev->dev,
+ "Unable to allocate IRQ %d\n", dd->pdev->irq);
+ goto out2;
+ }
+
+ /* Enable interrupts on the HBA. */
+ writel(readl(dd->mmio + HOST_CTRL) | HOST_IRQ_EN,
+ dd->mmio + HOST_CTRL);
+
+ init_timer(&dd->port->cmd_timer);
+ dd->port->cmd_timer.data = (unsigned long int) dd->port;
+ dd->port->cmd_timer.function = mtip_timeout_function;
+ mod_timer(&dd->port->cmd_timer,
+ jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
+
+ if (mtip_get_identify(dd->port, NULL) < 0) {
+ rv = -EFAULT;
+ goto out3;
+ }
+ mtip_dump_identify(dd->port);
+
+ if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) ==
+ MTIP_FTL_REBUILD_MAGIC) {
+ return mtip_ftl_rebuild_poll(dd);
+ }
+ return rv;
+
+out3:
+ del_timer_sync(&dd->port->cmd_timer);
+
+ /* Disable interrupts on the HBA. */
+ writel(readl(dd->mmio + HOST_CTRL) & ~HOST_IRQ_EN,
+ dd->mmio + HOST_CTRL);
+
+ /*Release the IRQ. */
+ devm_free_irq(&dd->pdev->dev, dd->pdev->irq, dd);
+
+out2:
+ mtip_deinit_port(dd->port);
+
+ /* Free the command/command header memory. */
+ dmam_free_coherent(&dd->pdev->dev,
+ HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE *
2),
+ dd->port->command_list,
+ dd->port->command_list_dma);
+out1:
+ /* Free the memory allocated for the for structure. */
+ kfree(dd->port);
+
+ return rv;
+}
+
+/*
+ * Called to deinitialize an interface.
+ *
+ * @dd Pointer to the driver data structure.
+ *
+ * return value
+ * 0
+ */
+int mtip_hw_exit(struct driver_data *dd)
+{
+ /*
+ * Send standby immediate (E0h) to the drive so that it
+ * saves its state.
+ */
+ if (atomic_read(&dd->drv_cleanup_done) != TRUE) {
+
+ mtip_standby_immediate(dd->port);
+
+ /* de-initialize the port. */
+ mtip_deinit_port(dd->port);
+
+ /* Disable interrupts on the HBA. */
+ writel(readl(dd->mmio + HOST_CTRL) & ~HOST_IRQ_EN,
+ dd->mmio + HOST_CTRL);
+ }
+
+ del_timer_sync(&dd->port->cmd_timer);
+
+#ifdef MTIP_USE_TASKLET
+ /* Stop the bottom half tasklet. */
+ tasklet_kill(&dd->tasklet);
+#endif
+
+ /* Release the IRQ. */
+ devm_free_irq(&dd->pdev->dev, dd->pdev->irq, dd);
+
+ /* Free the command/command header memory. */
+ dmam_free_coherent(&dd->pdev->dev,
+ HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2),
+ dd->port->command_list,
+ dd->port->command_list_dma);
+ /* Free the memory allocated for the for structure. */
+ kfree(dd->port);
+
+ return 0;
+}
+
+/*
+ * Issue a Standby Immediate command to the device.
+ *
+ * This function is called by the Block Layer just before the
+ * system powers off during a shutdown.
+ *
+ * @dd Pointer to the driver data structure.
+ *
+ * return value
+ * 0
+ */
+int mtip_hw_shutdown(struct driver_data *dd)
+{
+ /*
+ * Send standby immediate (E0h) to the drive so that it
+ * saves its state.
+ */
+ mtip_standby_immediate(dd->port);
+
+ return 0;
+}
+
+/*
+ * Suspend function
+ *
+ * This function is called by the Block Layer just before the
+ * system hibernates.
+ *
+ * @dd Pointer to the driver data structure.
+ *
+ * return value
+ * 0 Suspend was successful
+ * -EFAULT Suspend was not successful
+ */
+int mtip_hw_suspend(struct driver_data *dd)
+{
+ /*
+ * Send standby immediate (E0h) to the drive
+ * so that it saves its state.
+ */
+ if (mtip_standby_immediate(dd->port) != 0) {
+ dev_err(&dd->pdev->dev,
+ "Failed standby-immediate command\n");
+ return -EFAULT;
+ }
+
+ /* Disable interrupts on the HBA.*/
+ writel(readl(dd->mmio + HOST_CTRL) & ~HOST_IRQ_EN,
+ dd->mmio + HOST_CTRL);
+ mtip_deinit_port(dd->port);
+
+ return 0;
+}
+
+/*
+ * Resume function
+ *
+ * This function is called by the Block Layer as the
+ * system resumes.
+ *
+ * @dd Pointer to the driver data structure.
+ *
+ * return value
+ * 0 Resume was successful
+ * -EFAULT Resume was not successful
+ */
+int mtip_hw_resume(struct driver_data *dd)
+{
+ /* Perform any needed hardware setup steps */
+ hba_setup(dd);
+
+ /* Reset the HBA */
+ if (mtip_hba_reset(dd) != 0) {
+ dev_err(&dd->pdev->dev,
+ "Unable to reset the HBA\n");
+ return -EFAULT;
+ }
+
+ /*
+ * Enable the port, DMA engine, and FIS reception specific
+ * h/w in controller.
+ */
+ mtip_init_port(dd->port);
+ mtip_start_port(dd->port);
+
+ /* Enable interrupts on the HBA.*/
+ writel(readl(dd->mmio + HOST_CTRL) | HOST_IRQ_EN,
+ dd->mmio + HOST_CTRL);
+
+ return 0;
+}
+
+/*
+ * This function is called for clean the pending command in the
+ * command slot during the surprise removal of device and return
+ * error to the upper layer.
+ *
+ * @dd Pointer to the DRIVER_DATA structure.
+ *
+ * return value
+ * None
+ */
+void mtip_command_cleanup(struct driver_data *dd)
+{
+ int group = 0, commandslot = 0, commandindex = 0;
+ struct mtip_cmd *command;
+ struct mtip_port *port = dd->port;
+
+ for (group = 0; group < 4; group++) {
+ for (commandslot = 0; commandslot < 32; commandslot++) {
+ if (!(port->allocated[group] & (1 <<
commandslot)))
+ continue;
+
+ commandindex = group << 5 | commandslot;
+ command = &port->commands[commandindex];
+
+ if (atomic_read(&command->active)
+ && (command->async_callback)) {
+
command->async_callback(command->async_data,
+ -ENODEV);
+ command->async_callback = NULL;
+ command->async_data = NULL;
+ }
+
+ dma_unmap_sg(&port->dd->pdev->dev,
+ command->sg,
+ command->scatter_ents,
+ command->direction);
+ }
+ }
+
+ up(&port->cmd_slot);
+
+ atomic_set(&dd->drv_cleanup_done, TRUE);
+}
--
1.7.1
--
Regards,
Asai Thambi
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
