[PATCH v3 4/5] davinci: da850: add support for SATA interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for SATA controller on the
DA850/OMAP-L138/AM18x devices.

The patch adds the necessary clocks, platform
resources and a routine to initialize the SATA
controller.

The PHY configuration in this patch is
courtesy the work done by Zegeye Alemu,
Swaminathan and Mansoor Ahamed from TI.

While testing this patch, enable port multiplier
support iff you are actually using one. The
reasons of this behaviour are discussed
here: http://patchwork.ozlabs.org/patch/78163/

ChangeLog:
v3:
Removed fields which were being initialized
to zero in PHY configuration. Moved SATA base
address definition to the top of the file to
make it inline with what is done for the rest
of the modules.
v2:
Addressed comments from Sergei. Removed unnecessary
braces and removed unnecessary else after goto.

Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
---
 arch/arm/mach-davinci/da850.c              |    9 ++
 arch/arm/mach-davinci/devices-da8xx.c      |  126 ++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |    2 +
 3 files changed, 137 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 133aac4..2c1fad5 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -373,6 +373,14 @@ static struct clk spi1_clk = {
 	.flags		= DA850_CLK_ASYNC3,
 };
 
+static struct clk sata_clk = {
+	.name		= "sata",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_SATA,
+	.gpsc		= 1,
+	.flags		= PSC_FORCE,
+};
+
 static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -419,6 +427,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
+	CLK("ahci",		NULL,		&sata_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index fc4e98e..2f7e719 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -14,6 +14,8 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/serial_8250.h>
+#include <linux/ahci_platform.h>
+#include <linux/clk.h>
 
 #include <mach/cputype.h>
 #include <mach/common.h>
@@ -33,6 +35,7 @@
 #define DA8XX_SPI0_BASE			0x01c41000
 #define DA830_SPI1_BASE			0x01e12000
 #define DA8XX_LCD_CNTRL_BASE		0x01e13000
+#define DA850_SATA_BASE			0x01e18000
 #define DA850_MMCSD1_BASE		0x01e1b000
 #define DA8XX_EMAC_CPPI_PORT_BASE	0x01e20000
 #define DA8XX_EMAC_CPGMACSS_BASE	0x01e22000
@@ -842,3 +845,126 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
 
 	return platform_device_register(&da8xx_spi_device[instance]);
 }
+
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+
+static struct resource da850_sata_resources[] = {
+	{
+		.start	= DA850_SATA_BASE,
+		.end	= DA850_SATA_BASE + 0x1fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA850_SATAINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* SATA PHY Control Register offset from AHCI base */
+#define SATA_P0PHYCR_REG	0x178
+
+#define SATA_PHY_MPY(x)		((x) << 0)
+#define SATA_PHY_LOS(x)		((x) << 6)
+#define SATA_PHY_RXCDR(x)	((x) << 10)
+#define SATA_PHY_RXEQ(x)	((x) << 13)
+#define SATA_PHY_TXSWING(x)	((x) << 19)
+#define SATA_PHY_ENPLL(x)	((x) << 31)
+
+static struct clk *da850_sata_clk;
+static unsigned long da850_sata_refclkpn;
+
+/* Supported DA850 SATA crystal frequencies */
+#define KHZ_TO_HZ(freq) ((freq) * 1000)
+static unsigned long da850_sata_xtal[] = {
+	KHZ_TO_HZ(300000),
+	KHZ_TO_HZ(250000),
+	0,			/* Reserved */
+	KHZ_TO_HZ(187500),
+	KHZ_TO_HZ(150000),
+	KHZ_TO_HZ(125000),
+	KHZ_TO_HZ(120000),
+	KHZ_TO_HZ(100000),
+	KHZ_TO_HZ(75000),
+	KHZ_TO_HZ(60000),
+};
+
+static int da850_sata_init(struct device *dev, void __iomem *addr)
+{
+	int i, ret;
+	unsigned int val;
+
+	da850_sata_clk = clk_get(dev, NULL);
+	if (IS_ERR(da850_sata_clk))
+		return PTR_ERR(da850_sata_clk);
+
+	ret = clk_enable(da850_sata_clk);
+	if (ret)
+		goto err0;
+
+	/* Enable SATA clock receiver */
+	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+	val &= ~BIT(0);
+	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
+
+	/* Get the multiplier needed for 1.5GHz PLL output */
+	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
+		if (da850_sata_xtal[i] == da850_sata_refclkpn)
+			break;
+
+	if (i == ARRAY_SIZE(da850_sata_xtal)) {
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	val = SATA_PHY_MPY(i + 1) |
+		SATA_PHY_LOS(1) |
+		SATA_PHY_RXCDR(4) |
+		SATA_PHY_RXEQ(1) |
+		SATA_PHY_TXSWING(3) |
+		SATA_PHY_ENPLL(1);
+
+	__raw_writel(val, addr + SATA_P0PHYCR_REG);
+
+	return 0;
+
+err1:
+	clk_disable(da850_sata_clk);
+err0:
+	clk_put(da850_sata_clk);
+	return ret;
+}
+
+static void da850_sata_exit(struct device *dev)
+{
+	clk_disable(da850_sata_clk);
+	clk_put(da850_sata_clk);
+}
+
+static struct ahci_platform_data da850_sata_pdata = {
+	.init	= da850_sata_init,
+	.exit	= da850_sata_exit,
+};
+
+static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device da850_sata_device = {
+	.name	= "ahci",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &da850_sata_pdata,
+		.dma_mask		= &da850_sata_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(da850_sata_resources),
+	.resource	= da850_sata_resources,
+};
+
+int __init da850_register_sata(unsigned long refclkpn)
+{
+	da850_sata_refclkpn = refclkpn;
+	if (!da850_sata_refclkpn)
+		return -EINVAL;
+
+	return platform_device_register(&da850_sata_device);
+}
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index ad64da7..eaca7d8 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -57,6 +57,7 @@ extern unsigned int da850_max_speed;
 #define DA8XX_SYSCFG1_BASE	(IO_PHYS + 0x22C000)
 #define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
 #define DA8XX_DEEPSLEEP_REG	0x8
+#define DA8XX_PWRDN_REG		0x18
 
 #define DA8XX_PSC0_BASE		0x01c10000
 #define DA8XX_PLL0_BASE		0x01c11000
@@ -89,6 +90,7 @@ int da850_register_cpufreq(char *async_clk);
 int da8xx_register_cpuidle(void);
 void __iomem * __init da8xx_get_mem_ctlr(void);
 int da850_register_pm(struct platform_device *pdev);
+int __init da850_register_sata(unsigned long refclkpn);
 
 extern struct platform_device da8xx_serial_device;
 extern struct emac_platform_data da8xx_emac_pdata;
-- 
1.7.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux