Re: Power-up-in-standby Hitachi 5K3000 fails with either sata_sil24 or pmp, but not direct to AHCI controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Thu, Jun 09, 2011 at 02:16:07PM +0100, Tim Small wrote:
> ... if I then didn't power down the drive, but instead attached it
> to the Marvell controller, it didn't come back, so I'd guess the
> interaction with the 3124 has wedged the drive permanently.

Heh, that's interesting.  The feature isn't very well tested and it
wouldn't be too surprising if there are some bugs on all sides
(driver, controller and drive firmware).  Can you please try with a
drive from a different vendor and see whether it fares any
differently?

Thanks.

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux