Use normal debugging path for dynamic debug capability.
Convert dev_printk(KERN_DEBUG to dev_dbg(
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/ata/sata_via.c | 16 +++++++---------
1 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 21007b1..f93e43b 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -548,9 +548,8 @@ static void svia_configure(struct pci_dev *pdev, int board_id)
/* make sure SATA channels are enabled */
pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
- dev_printk(KERN_DEBUG, &pdev->dev,
- "enabling SATA channels (0x%x)\n",
- (int) tmp8);
+ dev_dbg(&pdev->dev, "enabling SATA channels (0x%x)\n",
+ (int)tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
}
@@ -558,9 +557,8 @@ static void svia_configure(struct pci_dev *pdev, int board_id)
/* make sure interrupts for each channel sent to us */
pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
- dev_printk(KERN_DEBUG, &pdev->dev,
- "enabling SATA channel interrupts (0x%x)\n",
- (int) tmp8);
+ dev_dbg(&pdev->dev, "enabling SATA channel interrupts (0x%x)\n",
+ (int) tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
}
@@ -568,9 +566,9 @@ static void svia_configure(struct pci_dev *pdev, int board_id)
/* make sure native mode is enabled */
pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
- dev_printk(KERN_DEBUG, &pdev->dev,
- "enabling SATA channel native mode (0x%x)\n",
- (int) tmp8);
+ dev_dbg(&pdev->dev,
+ "enabling SATA channel native mode (0x%x)\n",
+ (int) tmp8);
tmp8 |= NATIVE_MODE_ALL;
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
}
--
1.7.4.2.g597a6.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
