Re: [PATCH 02/20] ata_piix: unify code for programming PIO and MWDMA timings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.

On 20-02-2011 21:59, Alan Cox wrote:

+	if (ata_pio_need_iordy(adev) || use_mwdma)
   		control |= 2;	/* IE enable */

     Why IORDY is enabled for MWDMA has always been beyond me... I understand
that the stupid Intel docs are to be blamed here.

I fail to see whats stupid about the docs ?

   Association of IORDY with DMA mode is wrong.

The same timing register set is used for MWDMA and PIO cycles in MWDMA
tuned modes (eg ATAPI). Thus the controller needs to be in an MWDMA mode
whose timings are compatible with the PIO timing and we want IORDY in use
for the PIO transfer parts.

Yeah, especially if we also set the bit which only enables fast timing for DMA. ;-) PIO mode is setup by different code, and it takes care of the IORDY setting according to the PIO rules (and it gets called). DMA mode setup should just ignore the IORDY setting as in all other sane drivers.

Alan

WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux