On Tue, 08 Feb 2011 13:25:34 +0100 Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> wrote: > >From 11bed7feff5de752c9440ca58b232846b20e2ed6 Mon Sep 17 00:00:00 2001 > From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> > Date: Tue, 8 Feb 2011 12:39:28 +0100 > Subject: [PATCH 16/20] ata_piix: add EFAR SLC90E66 support > > Add EFAR SLC90E66 support to ata_piix and remove no longer > needed pata_efar driver. Jeff specifically asked that these were not all folded into ata_piix originally. This also makes memory usage higher and the system less efficient as these are all motherboard chipsets (except an obscure dual PIIX4 setup) so you are loading more not less code. It also leads to hideous uglies in the main code paths like this : + unsigned int has_sitre = (dev->vendor != 0x8086 || + dev->device != 0x1230); which also has exactly zero comments. and it gets better as we go on... + unsigned int is_radisys = (dev->vendor == PCI_VENDOR_ID_RADISYS && + dev->device == 0x8201); + unsigned int has_sitre = (dev->vendor != PCI_VENDOR_ID_INTEL || + dev->device != 0x1230) && !is_radisys; Folding these together just makes no sense at all. The PIO/DMA folds internally do look sensible, but really should be tested before anything goes in. The current code works - its slower than it should be because of core libata bugs, but it works. Alan -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
