>From 4cc4234e2049fa6e97d5a2d3643bb5499e52f838 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Date: Tue, 8 Feb 2011 12:39:28 +0100
Subject: [PATCH 18/20] ata_piix: add RDC support
Add RDC PATA support to ata_piix and remove no longer
needed pata_rdc driver.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ata/Kconfig | 1 +
drivers/ata/Makefile | 1 -
drivers/ata/ata_piix.c | 14 ++-
drivers/ata/pata_rdc.c | 384 ------------------------------------------------
4 files changed, 13 insertions(+), 387 deletions(-)
delete mode 100644 drivers/ata/pata_rdc.c
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5a92f24..dc9038d 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -567,6 +567,7 @@ config PATA_RADISYS
config PATA_RDC
tristate "RDC PATA support"
depends on PCI
+ select ATA_PIIX
help
This option enables basic support for the later RDC PATA controllers
controllers via the new ATA layer. For the RDC 1010, you need to
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 7e78491..e627f6d 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -58,7 +58,6 @@ obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o
obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o
-obj-$(CONFIG_PATA_RDC) += pata_rdc.o
obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o
obj-$(CONFIG_PATA_SCC) += pata_scc.o
obj-$(CONFIG_PATA_SCH) += pata_sch.o
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index deb7c96..86d12c2 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1,6 +1,9 @@
/*
* ata_piix.c - Intel PATA/SATA controllers
*
+ * This is actually a driver for hardware meeting
+ * INCITS 370-2004 (1510D): ATA Host Adapter Standards
+ *
* Maintained by: Jeff Garzik <jgarzik@xxxxxxxxx>
* Please ALWAYS copy linux-ide@xxxxxxxxxxxxxxx
* on emails.
@@ -249,6 +252,10 @@ static const struct pci_device_id piix_pci_tbl[] = {
/* IT8213 */
{ 0x1283, 0x8213, PCI_ANY_ID, PCI_ANY_ID, 0, 0, it8213_pata },
+ /* RDC is ICH like */
+ { 0x17F3, 0x1011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
+ { 0x17F3, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
+
/* SATA ports */
/* 82801EB (ICH5) */
@@ -665,6 +672,7 @@ MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("pata_efar");
MODULE_ALIAS("pata_it8213");
+MODULE_ALIAS("pata_rdc");
struct ich_laptop {
u16 device;
@@ -1670,7 +1678,8 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
* because some ACPI implementations mess up cable related
* bits on _STM. Reported on kernel bz#11879.
*/
- if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL ||
+ pdev->vendor == PCI_VENDOR_ID_RDC)
pci_read_config_dword(pdev, PIIX_IOCFG, &hpriv->saved_iocfg);
/* ICH6R may be driven by either ata_piix or ahci driver
@@ -1735,7 +1744,8 @@ static void piix_remove_one(struct pci_dev *pdev)
struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct piix_host_priv *hpriv = host->private_data;
- if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL ||
+ pdev->vendor == PCI_VENDOR_ID_RDC)
pci_write_config_dword(pdev, PIIX_IOCFG, hpriv->saved_iocfg);
ata_pci_remove_one(pdev);
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
deleted file mode 100644
index a4a0d88..0000000
--- a/drivers/ata/pata_rdc.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * pata_rdc - Driver for later RDC PATA controllers
- *
- * This is actually a driver for hardware meeting
- * INCITS 370-2004 (1510D): ATA Host Adapter Standards
- *
- * Based on ata_piix.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gfp.h>
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-#include <linux/dmi.h>
-
-#define DRV_NAME "pata_rdc"
-#define DRV_VERSION "0.01"
-
-struct rdc_host_priv {
- u32 saved_iocfg;
-};
-
-/**
- * rdc_pata_cable_detect - Probe host controller cable detect info
- * @ap: Port for which cable detect info is desired
- *
- * Read 80c cable indicator from ATA PCI device's PCI config
- * register. This register is normally set by firmware (BIOS).
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static int rdc_pata_cable_detect(struct ata_port *ap)
-{
- struct rdc_host_priv *hpriv = ap->host->private_data;
- u8 mask;
-
- /* check BIOS cable detect results */
- mask = 0x30 << (2 * ap->port_no);
- if ((hpriv->saved_iocfg & mask) == 0)
- return ATA_CBL_PATA40;
- return ATA_CBL_PATA80;
-}
-
-/**
- * rdc_pata_prereset - prereset for PATA host controller
- * @link: Target link
- * @deadline: deadline jiffies for the operation
- *
- * LOCKING:
- * None (inherited from caller).
- */
-static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
- static const struct pci_bits rdc_enable_bits[] = {
- { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */
- { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */
- };
-
- if (!pci_test_config_bits(pdev, &rdc_enable_bits[ap->port_no]))
- return -ENOENT;
- return ata_sff_prereset(link, deadline);
-}
-
-static DEFINE_SPINLOCK(rdc_lock);
-
-static void rdc_set_timings(struct ata_port *ap, struct ata_device *adev,
- u8 pio, bool use_mwdma)
-{
- struct pci_dev *dev = to_pci_dev(ap->host->dev);
- unsigned long flags;
- unsigned int is_slave = (adev->devno != 0);
- unsigned int master_port= ap->port_no ? 0x42 : 0x40;
- unsigned int slave_port = 0x44;
- u16 master_data;
- u8 slave_data;
- u8 udma_enable;
- int control = 0;
-
- static const /* ISP RTC */
- u8 timings[][2] = { { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
-
- if (pio >= 2 || use_mwdma)
- control |= 1; /* TIME1 enable */
- if (ata_pio_need_iordy(adev) || use_mwdma)
- control |= 2; /* IE enable */
- if (adev->class == ATA_DEV_ATA)
- control |= 4; /* PPE enable */
- /* If the drive MWDMA is faster than it can do PIO then
- we must force PIO into PIO0 */
- if (use_mwdma && adev->pio_mode < (XFER_PIO_0 + pio))
- /* Enable DMA timing only */
- control |= 8; /* PIO cycles in PIO0 */
-
- spin_lock_irqsave(&rdc_lock, flags);
-
- /* PIO configuration clears DTE unconditionally. It will be
- * programmed in set_dmamode which is guaranteed to be called
- * after set_piomode if any DMA mode is available.
- */
- pci_read_config_word(dev, master_port, &master_data);
- if (is_slave) {
- /* clear TIME1|IE1|PPE1|DTE1 */
- master_data &= 0xff0f;
- /* Enable SITRE (separate slave timing register) */
- master_data |= 0x4000;
- /* enable PPE1, IE1 and TIME1 as needed */
- master_data |= (control << 4);
- pci_read_config_byte(dev, slave_port, &slave_data);
- slave_data &= (ap->port_no ? 0x0f : 0xf0);
- /* Load the timing nibble for this slave */
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
- << (ap->port_no ? 4 : 0);
- } else {
- /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
- master_data &= 0xccf0;
- /* Enable PPE, IE and TIME as appropriate */
- master_data |= control;
- /* load ISP and RCT */
- master_data |=
- (timings[pio][0] << 12) |
- (timings[pio][1] << 8);
- }
- pci_write_config_word(dev, master_port, master_data);
- if (is_slave)
- pci_write_config_byte(dev, slave_port, slave_data);
-
- /* Ensure the UDMA bit is off - it will be turned back on if
- UDMA is selected */
-
- pci_read_config_byte(dev, 0x48, &udma_enable);
- udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
- pci_write_config_byte(dev, 0x48, udma_enable);
-
- spin_unlock_irqrestore(&rdc_lock, flags);
-}
-
-/**
- * rdc_set_piomode - Initialize host controller PATA PIO timings
- * @ap: Port whose timings we are configuring
- * @adev: Drive in question
- *
- * Set PIO mode for device, in host controller PCI config space.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- rdc_set_timings(ap, adev, adev->pio_mode - XFER_PIO_0, 0);
-}
-
-/**
- * rdc_set_dmamode - Initialize host controller PATA PIO timings
- * @ap: Port whose timings we are configuring
- * @adev: Drive in question
- *
- * Set UDMA mode for device, in host controller PCI config space.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
-{
- struct pci_dev *dev = to_pci_dev(ap->host->dev);
- unsigned long flags;
- u8 speed = adev->dma_mode;
- int devid = adev->devno + 2 * ap->port_no;
- u8 udma_enable = 0;
-
- if (speed >= XFER_UDMA_0) {
- unsigned int udma = speed - XFER_UDMA_0;
- u16 udma_timing;
- u16 ideconf;
- int u_clock, u_speed;
-
- spin_lock_irqsave(&rdc_lock, flags);
-
- pci_read_config_byte(dev, 0x48, &udma_enable);
-
- /*
- * UDMA is handled by a combination of clock switching and
- * selection of dividers
- *
- * Handy rule: Odd modes are UDMATIMx 01, even are 02
- * except UDMA0 which is 00
- */
- u_speed = min(2 - (udma & 1), udma);
- if (udma == 5)
- u_clock = 0x1000; /* 100Mhz */
- else if (udma > 2)
- u_clock = 1; /* 66Mhz */
- else
- u_clock = 0; /* 33Mhz */
-
- udma_enable |= (1 << devid);
-
- /* Load the CT/RP selection */
- pci_read_config_word(dev, 0x4A, &udma_timing);
- udma_timing &= ~(3 << (4 * devid));
- udma_timing |= u_speed << (4 * devid);
- pci_write_config_word(dev, 0x4A, udma_timing);
-
- /* Select a 33/66/100Mhz clock */
- pci_read_config_word(dev, 0x54, &ideconf);
- ideconf &= ~(0x1001 << devid);
- ideconf |= u_clock << devid;
- pci_write_config_word(dev, 0x54, ideconf);
-
- pci_write_config_byte(dev, 0x48, udma_enable);
-
- spin_unlock_irqrestore(&rdc_lock, flags);
- } else {
- /* MWDMA is driven by the PIO timings. */
- unsigned int mwdma = speed - XFER_MW_DMA_0;
- const unsigned int needed_pio[3] = {
- XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
- };
- int pio = needed_pio[mwdma] - XFER_PIO_0;
-
- rdc_set_timings(ap, adev, pio, 1);
- }
-}
-
-static struct ata_port_operations rdc_pata_ops = {
- .inherits = &ata_bmdma32_port_ops,
- .cable_detect = rdc_pata_cable_detect,
- .set_piomode = rdc_set_piomode,
- .set_dmamode = rdc_set_dmamode,
- .prereset = rdc_pata_prereset,
-};
-
-static struct ata_port_info rdc_port_info = {
-
- .flags = ATA_FLAG_SLAVE_POSS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA12_ONLY,
- .udma_mask = ATA_UDMA5,
- .port_ops = &rdc_pata_ops,
-};
-
-static struct scsi_host_template rdc_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
-};
-
-/**
- * rdc_init_one - Register PIIX ATA PCI device with kernel services
- * @pdev: PCI device to register
- * @ent: Entry in rdc_pci_tbl matching with @pdev
- *
- * Called from kernel PCI layer. We probe for combined mode (sigh),
- * and then hand over control to libata, for it to do the rest.
- *
- * LOCKING:
- * Inherited from PCI layer (may sleep).
- *
- * RETURNS:
- * Zero on success, or -ERRNO value.
- */
-
-static int __devinit rdc_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- static int printed_version;
- struct device *dev = &pdev->dev;
- struct ata_port_info port_info[2];
- const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
- unsigned long port_flags;
- struct ata_host *host;
- struct rdc_host_priv *hpriv;
- int rc;
-
- if (!printed_version++)
- dev_printk(KERN_DEBUG, &pdev->dev,
- "version " DRV_VERSION "\n");
-
- port_info[0] = rdc_port_info;
- port_info[1] = rdc_port_info;
-
- port_flags = port_info[0].flags;
-
- /* enable device and prepare host */
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
-
- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
- if (!hpriv)
- return -ENOMEM;
-
- /* Save IOCFG, this will be used for cable detection, quirk
- * detection and restoration on detach.
- */
- pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);
-
- rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
- if (rc)
- return rc;
- host->private_data = hpriv;
-
- pci_intx(pdev, 1);
-
- host->flags |= ATA_HOST_PARALLEL_SCAN;
-
- pci_set_master(pdev);
- return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &rdc_sht);
-}
-
-static void rdc_remove_one(struct pci_dev *pdev)
-{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
- struct rdc_host_priv *hpriv = host->private_data;
-
- pci_write_config_dword(pdev, 0x54, hpriv->saved_iocfg);
-
- ata_pci_remove_one(pdev);
-}
-
-static const struct pci_device_id rdc_pci_tbl[] = {
- { PCI_DEVICE(0x17F3, 0x1011), },
- { PCI_DEVICE(0x17F3, 0x1012), },
- { } /* terminate list */
-};
-
-static struct pci_driver rdc_pci_driver = {
- .name = DRV_NAME,
- .id_table = rdc_pci_tbl,
- .probe = rdc_init_one,
- .remove = rdc_remove_one,
-#ifdef CONFIG_PM
- .suspend = ata_pci_device_suspend,
- .resume = ata_pci_device_resume,
-#endif
-};
-
-
-static int __init rdc_init(void)
-{
- return pci_register_driver(&rdc_pci_driver);
-}
-
-static void __exit rdc_exit(void)
-{
- pci_unregister_driver(&rdc_pci_driver);
-}
-
-module_init(rdc_init);
-module_exit(rdc_exit);
-
-MODULE_AUTHOR("Alan Cox (based on ata_piix)");
-MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, rdc_pci_tbl);
-MODULE_VERSION(DRV_VERSION);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
