... the same as the 'pata_hpt366' driver does. Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx> --- The patch is against the recent Linus' tree plus the patches that Jeff has already applied -- except the one I have re-posted today: http://marc.info/?l=linux-ide&m=129450258305309 drivers/ata/pata_hpt37x.c | 29 +++++++++++++---------------- drivers/ata/pata_hpt3x2n.c | 12 +++++------- 2 files changed, 18 insertions(+), 23 deletions(-) Index: linux-2.6/drivers/ata/pata_hpt37x.c =================================================================== --- linux-2.6.orig/drivers/ata/pata_hpt37x.c +++ linux-2.6/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.18" +#define DRV_VERSION "0.6.19" struct hpt_clock { u8 xfer_speed; @@ -229,9 +229,8 @@ static int hpt_dma_blacklisted(const str while (list[i] != NULL) { if (!strcmp(list[i], model_num)) { - printk(KERN_WARNING DRV_NAME - ": %s is not supported for %s.\n", - modestr, list[i]); + pr_warning(DRV_NAME ": %s is not supported for %s.\n", + modestr, list[i]); return 1; } i++; @@ -864,7 +863,7 @@ static int hpt37x_init_one(struct pci_de chip_table = &hpt372; break; default: - printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, " + pr_err(DRV_NAME ": Unknown HPT366 subtype, " "please report (%d).\n", rev); return -ENODEV; } @@ -907,8 +906,8 @@ static int hpt37x_init_one(struct pci_de *ppi = &info_hpt374_fn1; break; default: - printk(KERN_ERR - "pata_hpt37x: PCI table is bogus, please report (%d).\n", + pr_err(DRV_NAME + ": PCI table is bogus, please report (%d).\n", dev->device); return -ENODEV; } @@ -958,8 +957,7 @@ static int hpt37x_init_one(struct pci_de u8 sr; u32 total = 0; - printk(KERN_WARNING - "pata_hpt37x: BIOS has not set timing clocks.\n"); + pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n"); /* This is the process the HPT371 BIOS is reported to use */ for (i = 0; i < 128; i++) { @@ -1015,8 +1013,7 @@ static int hpt37x_init_one(struct pci_de (f_high << 16) | f_low | 0x100); } if (adjust == 8) { - printk(KERN_ERR - "pata_hpt37x: DPLL did not stabilize!\n"); + pr_err(DRV_NAME ": DPLL did not stabilize!\n"); return -ENODEV; } if (dpll == 3) @@ -1024,9 +1021,8 @@ static int hpt37x_init_one(struct pci_de else private_data = (void *)hpt37x_timings_50; - printk(KERN_INFO - "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n", - MHz[clock_slot], MHz[dpll]); + pr_info(DVR_NAME ": bus clock %dMHz, using %dMHz DPLL.\n", + MHz[clock_slot], MHz[dpll]); } else { private_data = (void *)chip_table->clocks[clock_slot]; /* @@ -1039,8 +1035,9 @@ static int hpt37x_init_one(struct pci_de ppi[0] = &info_hpt370_33; if (clock_slot < 2 && ppi[0] == &info_hpt370a) ppi[0] = &info_hpt370a_33; - printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n", - chip_table->name, MHz[clock_slot]); + + pr_info(DRV_NAME ": %s using %dMHz bus clock.\n", + chip_table->name, MHz[clock_slot]); } /* Now kick off ATA set up */ Index: linux-2.6/drivers/ata/pata_hpt3x2n.c =================================================================== --- linux-2.6.orig/drivers/ata/pata_hpt3x2n.c +++ linux-2.6/drivers/ata/pata_hpt3x2n.c @@ -25,7 +25,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.13" +#define DRV_VERSION "0.3.14" enum { HPT_PCI_FAST = (1 << 31), @@ -418,7 +418,7 @@ static int hpt3x2n_pci_clock(struct pci_ u16 sr; u32 total = 0; - printk(KERN_WARNING "pata_hpt3x2n: BIOS clock data not set.\n"); + pr_warning(DRV_NAME ": BIOS clock data not set.\n"); /* This is the process the HPT371 BIOS is reported to use */ for (i = 0; i < 128; i++) { @@ -528,8 +528,7 @@ hpt372n: ppi[0] = &info_hpt372n; break; default: - printk(KERN_ERR - "pata_hpt3x2n: PCI table is bogus please report (%d).\n", + pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n", dev->device); return -ENODEV; } @@ -579,12 +578,11 @@ hpt372n: pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); } if (adjust == 8) { - printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n"); + pr_err(DRV_NAME ": DPLL did not stabilize!\n"); return -ENODEV; } - printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n", - pci_mhz); + pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz); /* * Set our private data up. We only need a few flags -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
