Fix 12 errors and 15 warnings given by checkpatch.pl: - *switch* and *case* not on the same indentation level; - no space between *for*/*switch*/*while* and open parenthesis; - space between an unary operator and its operand; - drive blacklist arrays not being *const*; - spaces before tabs; - lines over 80 characters. In addition to these changes, also do the following: - add new line after variable definitions; - fix the style of some multi-line comments. Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx> --- The patch is against the recent Linus' tree plus the patch I posted before: http://marc.info/?l=linux-ide&m=129330632207779 Changes from the previous version: - fixed several cases of a line over 80 chars that checkpatch.pl didn't report. drivers/ata/pata_hpt37x.c | 191 +++++++++++++++++++++++++--------------------- 1 file changed, 107 insertions(+), 84 deletions(-) Index: linux-2.6/drivers/ata/pata_hpt37x.c =================================================================== --- linux-2.6.orig/drivers/ata/pata_hpt37x.c +++ linux-2.6/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.16" +#define DRV_VERSION "0.6.17" struct hpt_clock { u8 xfer_speed; @@ -210,7 +210,7 @@ static u32 hpt37x_find_mode(struct ata_p { struct hpt_clock *clocks = ap->host->private_data; - while(clocks->xfer_speed) { + while (clocks->xfer_speed) { if (clocks->xfer_speed == speed) return clocks->timing; clocks++; @@ -219,7 +219,8 @@ static u32 hpt37x_find_mode(struct ata_p return 0xffffffffU; /* silence compiler warning */ } -static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, const char *list[]) +static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, + const char * const list[]) { unsigned char model_num[ATA_ID_PROD_LEN + 1]; int i = 0; @@ -228,7 +229,8 @@ static int hpt_dma_blacklisted(const str while (list[i] != NULL) { if (!strcmp(list[i], model_num)) { - printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n", + printk(KERN_WARNING DRV_NAME + ": %s is not supported for %s.\n", modestr, list[i]); return 1; } @@ -237,18 +239,23 @@ static int hpt_dma_blacklisted(const str return 0; } -static const char *bad_ata33[] = { - "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2", - "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", - "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", +static const char * const bad_ata33[] = { + "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", + "Maxtor 90845U3", "Maxtor 90650U2", + "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", + "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", + "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", + "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", "Maxtor 90510D4", "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2", - "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", - "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", + "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", + "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", + "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", + "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", NULL }; -static const char *bad_ata100_5[] = { +static const char * const bad_ata100_5[] = { "IBM-DTLA-307075", "IBM-DTLA-307060", "IBM-DTLA-307045", @@ -389,6 +396,7 @@ static int hpt37x_pre_reset(struct ata_l { 0x50, 1, 0x04, 0x04 }, { 0x54, 1, 0x04, 0x04 } }; + if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no])) return -ENOENT; @@ -673,12 +681,12 @@ static int hpt37x_calibrate_dpll(struct u32 reg5c; int tries; - for(tries = 0; tries < 0x5000; tries++) { + for (tries = 0; tries < 0x5000; tries++) { udelay(50); pci_read_config_byte(dev, 0x5b, ®5b); if (reg5b & 0x80) { /* See if it stays set */ - for(tries = 0; tries < 0x1000; tries ++) { + for (tries = 0; tries < 0x1000; tries++) { pci_read_config_byte(dev, 0x5b, ®5b); /* Failed ? */ if ((reg5b & 0x80) == 0) @@ -686,7 +694,7 @@ static int hpt37x_calibrate_dpll(struct } /* Turn off tuning, we have the DPLL set */ pci_read_config_dword(dev, 0x5c, ®5c); - pci_write_config_dword(dev, 0x5c, reg5c & ~ 0x100); + pci_write_config_dword(dev, 0x5c, reg5c & ~0x100); return 1; } } @@ -698,6 +706,7 @@ static u32 hpt374_read_freq(struct pci_d { u32 freq; unsigned long io_base = pci_resource_start(pdev, 4); + if (PCI_FUNC(pdev->devfn) & 1) { struct pci_dev *pdev_0; @@ -839,64 +848,68 @@ static int hpt37x_init_one(struct pci_de if (rev == 6) return -ENODEV; - switch(rev) { - case 3: - ppi[0] = &info_hpt370; - chip_table = &hpt370; - prefer_dpll = 0; - break; - case 4: - ppi[0] = &info_hpt370a; - chip_table = &hpt370a; - prefer_dpll = 0; - break; - case 5: - ppi[0] = &info_hpt372; - chip_table = &hpt372; - break; - default: - printk(KERN_ERR "pata_hpt37x: Unknown HPT366 " - "subtype, please report (%d).\n", rev); - return -ENODEV; + switch (rev) { + case 3: + ppi[0] = &info_hpt370; + chip_table = &hpt370; + prefer_dpll = 0; + break; + case 4: + ppi[0] = &info_hpt370a; + chip_table = &hpt370a; + prefer_dpll = 0; + break; + case 5: + ppi[0] = &info_hpt372; + chip_table = &hpt372; + break; + default: + printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, " + "please report (%d).\n", rev); + return -ENODEV; } } else { - switch(dev->device) { - case PCI_DEVICE_ID_TTI_HPT372: - /* 372N if rev >= 2 */ - if (rev >= 2) - return -ENODEV; - ppi[0] = &info_hpt372; - chip_table = &hpt372a; - break; - case PCI_DEVICE_ID_TTI_HPT302: - /* 302N if rev > 1 */ - if (rev > 1) - return -ENODEV; - ppi[0] = &info_hpt302; - /* Check this */ - chip_table = &hpt302; - break; - case PCI_DEVICE_ID_TTI_HPT371: - if (rev > 1) - return -ENODEV; - ppi[0] = &info_hpt302; - chip_table = &hpt371; - /* Single channel device, master is not present - but the BIOS (or us for non x86) must mark it - absent */ - pci_read_config_byte(dev, 0x50, &mcr1); - mcr1 &= ~0x04; - pci_write_config_byte(dev, 0x50, mcr1); - break; - case PCI_DEVICE_ID_TTI_HPT374: - chip_table = &hpt374; - if (!(PCI_FUNC(dev->devfn) & 1)) - *ppi = &info_hpt374_fn0; - else - *ppi = &info_hpt374_fn1; - break; - default: - printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device); + switch (dev->device) { + case PCI_DEVICE_ID_TTI_HPT372: + /* 372N if rev >= 2 */ + if (rev >= 2) + return -ENODEV; + ppi[0] = &info_hpt372; + chip_table = &hpt372a; + break; + case PCI_DEVICE_ID_TTI_HPT302: + /* 302N if rev > 1 */ + if (rev > 1) + return -ENODEV; + ppi[0] = &info_hpt302; + /* Check this */ + chip_table = &hpt302; + break; + case PCI_DEVICE_ID_TTI_HPT371: + if (rev > 1) + return -ENODEV; + ppi[0] = &info_hpt302; + chip_table = &hpt371; + /* + * Single channel device, master is not present + * but the BIOS (or us for non x86) must mark it + * absent + */ + pci_read_config_byte(dev, 0x50, &mcr1); + mcr1 &= ~0x04; + pci_write_config_byte(dev, 0x50, mcr1); + break; + case PCI_DEVICE_ID_TTI_HPT374: + chip_table = &hpt374; + if (!(PCI_FUNC(dev->devfn) & 1)) + *ppi = &info_hpt374_fn0; + else + *ppi = &info_hpt374_fn1; + break; + default: + printk(KERN_ERR + "pata_hpt37x: PCI table is bogus, please report (%d).\n", + dev->device); return -ENODEV; } } @@ -927,9 +940,11 @@ static int hpt37x_init_one(struct pci_de if (chip_table == &hpt372a) outb(0x0e, iobase + 0x9c); - /* Some devices do not let this value be accessed via PCI space - according to the old driver. In addition we must use the value - from FN 0 on the HPT374 */ + /* + * Some devices do not let this value be accessed via PCI space + * according to the old driver. In addition we must use the value + * from FN 0 on the HPT374. + */ if (chip_table == &hpt374) { freq = hpt374_read_freq(dev); @@ -943,10 +958,11 @@ static int hpt37x_init_one(struct pci_de u8 sr; u32 total = 0; - printk(KERN_WARNING "pata_hpt37x: BIOS has not set timing clocks.\n"); + printk(KERN_WARNING + "pata_hpt37x: BIOS has not set timing clocks.\n"); /* This is the process the HPT371 BIOS is reported to use */ - for(i = 0; i < 128; i++) { + for (i = 0; i < 128; i++) { pci_read_config_byte(dev, 0x78, &sr); total += sr & 0x1FF; udelay(15); @@ -981,20 +997,26 @@ static int hpt37x_init_one(struct pci_de /* Select the DPLL clock. */ pci_write_config_byte(dev, 0x5b, 0x21); - pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100); + pci_write_config_dword(dev, 0x5C, + (f_high << 16) | f_low | 0x100); - for(adjust = 0; adjust < 8; adjust++) { + for (adjust = 0; adjust < 8; adjust++) { if (hpt37x_calibrate_dpll(dev)) break; - /* See if it'll settle at a fractionally different clock */ + /* + * See if it'll settle at a fractionally + * different clock + */ if (adjust & 1) f_low -= adjust >> 1; else f_high += adjust >> 1; - pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100); + pci_write_config_dword(dev, 0x5C, + (f_high << 16) | f_low | 0x100); } if (adjust == 8) { - printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n"); + printk(KERN_ERR + "pata_hpt37x: DPLL did not stabilize!\n"); return -ENODEV; } if (dpll == 3) @@ -1002,7 +1024,8 @@ static int hpt37x_init_one(struct pci_de else private_data = (void *)hpt37x_timings_50; - printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n", + printk(KERN_INFO + "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n", MHz[clock_slot], MHz[dpll]); } else { private_data = (void *)chip_table->clocks[clock_slot]; @@ -1010,7 +1033,7 @@ static int hpt37x_init_one(struct pci_de * Perform a final fixup. Note that we will have used the * DPLL on the HPT372 which means we don't have to worry * about lack of UDMA133 support on lower clocks - */ + */ if (clock_slot < 2 && ppi[0] == &info_hpt370) ppi[0] = &info_hpt370_33; @@ -1035,9 +1058,9 @@ static const struct pci_device_id hpt37x }; static struct pci_driver hpt37x_pci_driver = { - .name = DRV_NAME, + .name = DRV_NAME, .id_table = hpt37x, - .probe = hpt37x_init_one, + .probe = hpt37x_init_one, .remove = ata_pci_remove_one }; -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
