Hello, My old IDE hard disk is broken so I installed new SATA drive on my box with F13: dmesg : http://userweb.kernel.org/~jaswinder/P4_HT/dmesg_2633_fc13.txt lsmod: http://userweb.kernel.org/~jaswinder/P4_HT/lsmod_2633_fc13.txt lspci: 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02) 00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) I am trying to build the kernel with this config: http://userweb.kernel.org/~jaswinder/P4_HT/config-ht-test.txt But I am getting error : No root device found. Boot has failed, sleeping forever I am trying to determine the information about the SATA controller so that I can choose the appropriate controller for SATA in kernel config. I am not able to figure out the SATA information from above dmesg and lsmod. How can I do so. Thanks, -- Jaswinder Singh. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
