Re: libata acpi issue on gateway laptop

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 06, 2010 at 10:05:27PM +0200, Tejun Heo wrote:
> Hmm... I don't see any timeout in the log you posted.  Ah, okay, the
> interesting part is in the full log, the ACPI GTF sequence itself is
> finishing fine but the next NCQ READ command is timing out.  The BIOS
> is enabling non-zero buffer offsets and DMA setup FIS auto-activate.
> It's likely that the controller isn't being configured correctly
> leading to mismatch between the behavior expected by the controller
> and the actual drive behavior.  Hmm.... I'll look further into it
> tomorrow.  For the record, can you please attach the full log, lspci
> -nn output and dmidecode output here?
> 

Thanks Tejun, I've requested this from the original reporter, and I'll
attach it here when I hear back.

(Oops, sorry for fudging linux-ide->linux-ata, thanks for fixing that.)

regards, Kyle
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux