Re: possible esata regression in 2.6.35

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/21/2010 02:52 PM, Nicolas Jungers wrote:
My arm box doesn't succeed to use my esata port multiplier (addonics
sil3726 based). It was working well with 2.6.34.1 and 2.6.34.4 but not
with both 2.6.35.2 and 2.6.35.3. I haven't test other kernels.

The kernels are from http://sheeva.with-linux.com/sheeva/ with for
example the following config
http://sheeva.with-linux.com/sheeva/2.6.35.3/sheeva-2.6.35.3.config

The symptoms are in the console a loop on the esata links. Here is the
start of it:

ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
ata2: edma_err_cause=00000010 pp_flags=00000000, dev connect
ata2: SError: { PHYRdyChg DevExch }
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
ata2.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9

Can you post or link to the entire dmesg?

Notably, we need to see the probe messages to determine what SATA chip you are using... From the edma_err_cause config I'd guess sata_mv, but more info would be useful.

	Jeff




--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux