Re: [PATCH] SATA / AHCI: Do not play with the link PM during suspend to RAM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello, Rafael.

Can you please try the following patch and see whether the problem
goes away?

Thanks.

 drivers/ata/ahci.c          |    3
 drivers/ata/ahci.h          |    1
 drivers/ata/ahci_platform.c |    3
 drivers/ata/ata_piix.c      |   24 +++
 drivers/ata/libahci.c       |  161 +++++++-------------------
 drivers/ata/libata-core.c   |  269 ++++++++++----------------------------------
 drivers/ata/libata-eh.c     |  176 +++++++++++++++++++++++++---
 drivers/ata/libata-pmp.c    |   49 +++++++-
 drivers/ata/libata-scsi.c   |   74 ++++--------
 drivers/ata/libata.h        |   12 +
 include/linux/libata.h      |   40 +++---
 11 files changed, 393 insertions(+), 419 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index f252253..cfdc22b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1190,9 +1190,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		ata_port_pbar_desc(ap, AHCI_PCI_BAR,
 				   0x100 + ap->port_no * 0x80, "port");

-		/* set initial link pm policy */
-		ap->pm_policy = NOT_AVAILABLE;
-
 		/* set enclosure management message type */
 		if (ap->flags & ATA_FLAG_EM)
 			ap->em_message_type = hpriv->em_msg_type;
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 7113c57..6d07948 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -201,7 +201,6 @@ enum {
 	AHCI_HFLAG_MV_PATA		= (1 << 4), /* PATA port */
 	AHCI_HFLAG_NO_MSI		= (1 << 5), /* no PCI MSI */
 	AHCI_HFLAG_NO_PMP		= (1 << 6), /* no PMP */
-	AHCI_HFLAG_NO_HOTPLUG		= (1 << 7), /* ignore PxSERR.DIAG.N */
 	AHCI_HFLAG_SECT255		= (1 << 8), /* max 255 sectors */
 	AHCI_HFLAG_YES_NCQ		= (1 << 9), /* force NCQ cap on */
 	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 5e11b16..0f69afe 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -120,9 +120,6 @@ static int __init ahci_probe(struct platform_device *pdev)
 		ata_port_desc(ap, "mmio %pR", mem);
 		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);

-		/* set initial link pm policy */
-		ap->pm_policy = NOT_AVAILABLE;
-
 		/* set enclosure management message type */
 		if (ap->flags & ATA_FLAG_EM)
 			ap->em_message_type = hpriv->em_msg_type;
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 7409f98..0df0477 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -174,6 +174,8 @@ static int piix_sidpr_scr_read(struct ata_link *link,
 			       unsigned int reg, u32 *val);
 static int piix_sidpr_scr_write(struct ata_link *link,
 				unsigned int reg, u32 val);
+static int piix_sidpr_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
+			      unsigned hints);
 static bool piix_irq_check(struct ata_port *ap);
 #ifdef CONFIG_PM
 static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
@@ -343,11 +345,22 @@ static struct ata_port_operations ich_pata_ops = {
 	.set_dmamode		= ich_set_dmamode,
 };

+static struct device_attribute *piix_sidpr_shost_attrs[] = {
+	&dev_attr_link_power_management_policy,
+	NULL
+};
+
+static struct scsi_host_template piix_sidpr_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+	.shost_attrs		= piix_sidpr_shost_attrs,
+};
+
 static struct ata_port_operations piix_sidpr_sata_ops = {
 	.inherits		= &piix_sata_ops,
 	.hardreset		= sata_std_hardreset,
 	.scr_read		= piix_sidpr_scr_read,
 	.scr_write		= piix_sidpr_scr_write,
+	.set_ipm		= piix_sidpr_set_ipm,
 };

 static const struct piix_map_db ich5_map_db = {
@@ -973,6 +986,12 @@ static int piix_sidpr_scr_write(struct ata_link *link,
 	return 0;
 }

+static int piix_sidpr_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
+			      unsigned hints)
+{
+	return sata_link_scr_ipm(link, policy, false);
+}
+
 static bool piix_irq_check(struct ata_port *ap)
 {
 	if (unlikely(!ap->ioaddr.bmdma_addr))
@@ -1532,6 +1551,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	struct device *dev = &pdev->dev;
 	struct ata_port_info port_info[2];
 	const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
+	struct scsi_host_template *sht = &piix_sht;
 	unsigned long port_flags;
 	struct ata_host *host;
 	struct piix_host_priv *hpriv;
@@ -1600,6 +1620,8 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 		rc = piix_init_sidpr(host);
 		if (rc)
 			return rc;
+		if (host->ports[0]->ops == &piix_sidpr_sata_ops)
+			sht = &piix_sidpr_sht;
 	}

 	/* apply IOCFG bit18 quirk */
@@ -1626,7 +1648,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	host->flags |= ATA_HOST_PARALLEL_SCAN;

 	pci_set_master(pdev);
-	return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &piix_sht);
+	return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
 }

 static void piix_remove_one(struct pci_dev *pdev)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 81e772a..2c5f3df 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -56,9 +56,8 @@ MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)
 module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
 MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");

-static int ahci_enable_alpm(struct ata_port *ap,
-		enum link_pm policy);
-static void ahci_disable_alpm(struct ata_port *ap);
+static int ahci_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
+			unsigned hints);
 static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
 static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
 			      size_t size);
@@ -172,8 +171,7 @@ struct ata_port_operations ahci_ops = {
 	.pmp_attach		= ahci_pmp_attach,
 	.pmp_detach		= ahci_pmp_detach,

-	.enable_pm		= ahci_enable_alpm,
-	.disable_pm		= ahci_disable_alpm,
+	.set_ipm		= ahci_set_ipm,
 	.em_show		= ahci_led_show,
 	.em_store		= ahci_led_store,
 	.sw_activity_show	= ahci_activity_show,
@@ -644,127 +642,59 @@ static void ahci_power_up(struct ata_port *ap)
 	writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
 }

-static void ahci_disable_alpm(struct ata_port *ap)
+static int ahci_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
+			unsigned int hints)
 {
+	struct ata_port *ap = link->ap;
 	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 cmd;
 	struct ahci_port_priv *pp = ap->private_data;
-
-	/* IPM bits should be disabled by libata-core */
-	/* get the existing command bits */
-	cmd = readl(port_mmio + PORT_CMD);
-
-	/* disable ALPM and ASP */
-	cmd &= ~PORT_CMD_ASP;
-	cmd &= ~PORT_CMD_ALPE;
-
-	/* force the interface back to active */
-	cmd |= PORT_CMD_ICC_ACTIVE;
-
-	/* write out new cmd value */
-	writel(cmd, port_mmio + PORT_CMD);
-	cmd = readl(port_mmio + PORT_CMD);
-
-	/* wait 10ms to be sure we've come out of any low power state */
-	msleep(10);
-
-	/* clear out any PhyRdy stuff from interrupt status */
-	writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
-
-	/* go ahead and clean out PhyRdy Change from Serror too */
-	ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
-
-	/*
-	 * Clear flag to indicate that we should ignore all PhyRdy
-	 * state changes
-	 */
-	hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
-
-	/*
-	 * Enable interrupts on Phy Ready.
-	 */
-	pp->intr_mask |= PORT_IRQ_PHYRDY;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-
-	/*
-	 * don't change the link pm policy - we can be called
-	 * just to turn of link pm temporarily
-	 */
-}
-
-static int ahci_enable_alpm(struct ata_port *ap,
-	enum link_pm policy)
-{
-	struct ahci_host_priv *hpriv = ap->host->private_data;
 	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 cmd;
-	struct ahci_port_priv *pp = ap->private_data;
-	u32 asp;

-	/* Make sure the host is capable of link power management */
-	if (!(hpriv->cap & HOST_CAP_ALPM))
-		return -EINVAL;
+	ata_link_printk(link, KERN_INFO, "XXX ahci_set_ipm: pol=%d hints=%x\n",
+			policy, hints);

-	switch (policy) {
-	case MAX_PERFORMANCE:
-	case NOT_AVAILABLE:
+	if (policy != ATA_IPM_MAX_POWER) {
 		/*
-		 * if we came here with NOT_AVAILABLE,
-		 * it just means this is the first time we
-		 * have tried to enable - default to max performance,
-		 * and let the user go to lower power modes on request.
+		 * Disable interrupts on Phy Ready. This keeps us from
+		 * getting woken up due to spurious phy ready
+		 * interrupts.
 		 */
-		ahci_disable_alpm(ap);
-		return 0;
-	case MIN_POWER:
-		/* configure HBA to enter SLUMBER */
-		asp = PORT_CMD_ASP;
-		break;
-	case MEDIUM_POWER:
-		/* configure HBA to enter PARTIAL */
-		asp = 0;
-		break;
-	default:
-		return -EINVAL;
+		pp->intr_mask &= ~PORT_IRQ_PHYRDY;
+		writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+		sata_link_scr_ipm(link, policy, false);
 	}

-	/*
-	 * Disable interrupts on Phy Ready. This keeps us from
-	 * getting woken up due to spurious phy ready interrupts
-	 * TBD - Hot plug should be done via polling now, is
-	 * that even supported?
-	 */
-	pp->intr_mask &= ~PORT_IRQ_PHYRDY;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+	if (hpriv->cap & HOST_CAP_ALPM) {
+		u32 cmd = readl(port_mmio + PORT_CMD);

-	/*
-	 * Set a flag to indicate that we should ignore all PhyRdy
-	 * state changes since these can happen now whenever we
-	 * change link state
-	 */
-	hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
+		if (policy == ATA_IPM_MAX_POWER || !(hints & ATA_IPM_HIPM)) {
+			cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE);
+			cmd |= PORT_CMD_ICC_ACTIVE;

-	/* get the existing command bits */
-	cmd = readl(port_mmio + PORT_CMD);
+			writel(cmd, port_mmio + PORT_CMD);
+			readl(port_mmio + PORT_CMD);

-	/*
-	 * Set ASP based on Policy
-	 */
-	cmd |= asp;
+			/* wait 10ms to be sure we've come out of IPM state */
+			msleep(10);
+		} else {
+			cmd |= PORT_CMD_ALPE;
+			if (policy == ATA_IPM_MIN_POWER)
+				cmd |= PORT_CMD_ASP;

-	/*
-	 * Setting this bit will instruct the HBA to aggressively
-	 * enter a lower power link state when it's appropriate and
-	 * based on the value set above for ASP
-	 */
-	cmd |= PORT_CMD_ALPE;
+			/* write out new cmd value */
+			writel(cmd, port_mmio + PORT_CMD);
+		}
+	}

-	/* write out new cmd value */
-	writel(cmd, port_mmio + PORT_CMD);
-	cmd = readl(port_mmio + PORT_CMD);
+	if (policy == ATA_IPM_MAX_POWER) {
+		sata_link_scr_ipm(link, policy, false);
+
+		/* turn PHYRDY IRQ back on */
+		pp->intr_mask |= PORT_IRQ_PHYRDY;
+		writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+	}

-	/* IPM bits should be set by libata-core */
 	return 0;
 }

@@ -1662,15 +1592,10 @@ static void ahci_port_intr(struct ata_port *ap)
 	if (unlikely(resetting))
 		status &= ~PORT_IRQ_BAD_PMP;

-	/* If we are getting PhyRdy, this is
-	 * just a power state change, we should
-	 * clear out this, plus the PhyRdy/Comm
-	 * Wake bits from Serror
-	 */
-	if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
-		(status & PORT_IRQ_PHYRDY)) {
+	/* if IPM is enabled, PHYRDY doesn't mean anything */
+	if (ap->link.ipm_policy > ATA_IPM_MAX_POWER) {
 		status &= ~PORT_IRQ_PHYRDY;
-		ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
+		ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG);
 	}

 	if (unlikely(status & PORT_IRQ_ERROR)) {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ddf8e48..5d1eeb1 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -91,8 +91,6 @@ const struct ata_port_operations sata_port_ops = {
 static unsigned int ata_dev_init_params(struct ata_device *dev,
 					u16 heads, u16 sectors);
 static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
-static unsigned int ata_dev_set_feature(struct ata_device *dev,
-					u8 enable, u8 feature);
 static void ata_dev_xfermask(struct ata_device *dev);
 static unsigned long ata_dev_blacklisted(const struct ata_device *dev);

@@ -1032,182 +1030,6 @@ static const char *sata_spd_string(unsigned int spd)
 	return spd_str[spd - 1];
 }

-static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
-{
-	struct ata_link *link = dev->link;
-	struct ata_port *ap = link->ap;
-	u32 scontrol;
-	unsigned int err_mask;
-	int rc;
-
-	/*
-	 * disallow DIPM for drivers which haven't set
-	 * ATA_FLAG_IPM.  This is because when DIPM is enabled,
-	 * phy ready will be set in the interrupt status on
-	 * state changes, which will cause some drivers to
-	 * think there are errors - additionally drivers will
-	 * need to disable hot plug.
-	 */
-	if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) {
-		ap->pm_policy = NOT_AVAILABLE;
-		return -EINVAL;
-	}
-
-	/*
-	 * For DIPM, we will only enable it for the
-	 * min_power setting.
-	 *
-	 * Why?  Because Disks are too stupid to know that
-	 * If the host rejects a request to go to SLUMBER
-	 * they should retry at PARTIAL, and instead it
-	 * just would give up.  So, for medium_power to
-	 * work at all, we need to only allow HIPM.
-	 */
-	rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
-	if (rc)
-		return rc;
-
-	switch (policy) {
-	case MIN_POWER:
-		/* no restrictions on IPM transitions */
-		scontrol &= ~(0x3 << 8);
-		rc = sata_scr_write(link, SCR_CONTROL, scontrol);
-		if (rc)
-			return rc;
-
-		/* enable DIPM */
-		if (dev->flags & ATA_DFLAG_DIPM)
-			err_mask = ata_dev_set_feature(dev,
-					SETFEATURES_SATA_ENABLE, SATA_DIPM);
-		break;
-	case MEDIUM_POWER:
-		/* allow IPM to PARTIAL */
-		scontrol &= ~(0x1 << 8);
-		scontrol |= (0x2 << 8);
-		rc = sata_scr_write(link, SCR_CONTROL, scontrol);
-		if (rc)
-			return rc;
-
-		/*
-		 * we don't have to disable DIPM since IPM flags
-		 * disallow transitions to SLUMBER, which effectively
-		 * disable DIPM if it does not support PARTIAL
-		 */
-		break;
-	case NOT_AVAILABLE:
-	case MAX_PERFORMANCE:
-		/* disable all IPM transitions */
-		scontrol |= (0x3 << 8);
-		rc = sata_scr_write(link, SCR_CONTROL, scontrol);
-		if (rc)
-			return rc;
-
-		/*
-		 * we don't have to disable DIPM since IPM flags
-		 * disallow all transitions which effectively
-		 * disable DIPM anyway.
-		 */
-		break;
-	}
-
-	/* FIXME: handle SET FEATURES failure */
-	(void) err_mask;
-
-	return 0;
-}
-
-/**
- *	ata_dev_enable_pm - enable SATA interface power management
- *	@dev:  device to enable power management
- *	@policy: the link power management policy
- *
- *	Enable SATA Interface power management.  This will enable
- *	Device Interface Power Management (DIPM) for min_power
- * 	policy, and then call driver specific callbacks for
- *	enabling Host Initiated Power management.
- *
- *	Locking: Caller.
- *	Returns: -EINVAL if IPM is not supported, 0 otherwise.
- */
-void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy)
-{
-	int rc = 0;
-	struct ata_port *ap = dev->link->ap;
-
-	/* set HIPM first, then DIPM */
-	if (ap->ops->enable_pm)
-		rc = ap->ops->enable_pm(ap, policy);
-	if (rc)
-		goto enable_pm_out;
-	rc = ata_dev_set_dipm(dev, policy);
-
-enable_pm_out:
-	if (rc)
-		ap->pm_policy = MAX_PERFORMANCE;
-	else
-		ap->pm_policy = policy;
-	return /* rc */;	/* hopefully we can use 'rc' eventually */
-}
-
-#ifdef CONFIG_PM
-/**
- *	ata_dev_disable_pm - disable SATA interface power management
- *	@dev: device to disable power management
- *
- *	Disable SATA Interface power management.  This will disable
- *	Device Interface Power Management (DIPM) without changing
- * 	policy,  call driver specific callbacks for disabling Host
- * 	Initiated Power management.
- *
- *	Locking: Caller.
- *	Returns: void
- */
-static void ata_dev_disable_pm(struct ata_device *dev)
-{
-	struct ata_port *ap = dev->link->ap;
-
-	ata_dev_set_dipm(dev, MAX_PERFORMANCE);
-	if (ap->ops->disable_pm)
-		ap->ops->disable_pm(ap);
-}
-#endif	/* CONFIG_PM */
-
-void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
-{
-	ap->pm_policy = policy;
-	ap->link.eh_info.action |= ATA_EH_LPM;
-	ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
-	ata_port_schedule_eh(ap);
-}
-
-#ifdef CONFIG_PM
-static void ata_lpm_enable(struct ata_host *host)
-{
-	struct ata_link *link;
-	struct ata_port *ap;
-	struct ata_device *dev;
-	int i;
-
-	for (i = 0; i < host->n_ports; i++) {
-		ap = host->ports[i];
-		ata_for_each_link(link, ap, EDGE) {
-			ata_for_each_dev(dev, link, ALL)
-				ata_dev_disable_pm(dev);
-		}
-	}
-}
-
-static void ata_lpm_disable(struct ata_host *host)
-{
-	int i;
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-		ata_lpm_schedule(ap, ap->pm_policy);
-	}
-}
-#endif	/* CONFIG_PM */
-
 /**
  *	ata_dev_classify - determine device type based on ATA-spec signature
  *	@tf: ATA taskfile register set for device to be identified
@@ -2566,13 +2388,6 @@ int ata_dev_configure(struct ata_device *dev)
 	if (dev->flags & ATA_DFLAG_LBA48)
 		dev->max_sectors = ATA_MAX_SECTORS_LBA48;

-	if (!(dev->horkage & ATA_HORKAGE_IPM)) {
-		if (ata_id_has_hipm(dev->id))
-			dev->flags |= ATA_DFLAG_HIPM;
-		if (ata_id_has_dipm(dev->id))
-			dev->flags |= ATA_DFLAG_DIPM;
-	}
-
 	/* Limit PATA drive on SATA cable bridge transfers to udma5,
 	   200 sectors */
 	if (ata_dev_knobble(dev)) {
@@ -2593,13 +2408,6 @@ int ata_dev_configure(struct ata_device *dev)
 		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
 					 dev->max_sectors);

-	if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) {
-		dev->horkage |= ATA_HORKAGE_IPM;
-
-		/* reset link pm_policy for this port to no pm */
-		ap->pm_policy = MAX_PERFORMANCE;
-	}
-
 	if (ap->ops->dev_config)
 		ap->ops->dev_config(dev);

@@ -3630,7 +3438,7 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
  *	@params: timing parameters { interval, duratinon, timeout } in msec
  *	@deadline: deadline jiffies for the operation
  *
-*	Make sure SStatus of @link reaches stable state, determined by
+ *	Make sure SStatus of @link reaches stable state, determined by
  *	holding the same value where DET is not 1 for @duration polled
  *	every @interval, before @timeout.  Timeout constraints the
  *	beginning of the stable state.  Because DET gets stuck at 1 on
@@ -3761,6 +3569,65 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
 	return rc != -EINVAL ? rc : 0;
 }

+int sata_link_scr_ipm(struct ata_link *link, enum ata_ipm_policy policy,
+		      bool spm_wakeup)
+{
+	struct ata_eh_context *ehc = &link->eh_context;
+	bool woken_up = false;
+	u32 scontrol;
+	int rc;
+
+	ata_link_printk(link, KERN_INFO,
+			"XXX sata_link_scr_ipm: pol=%d spm_wakeup=%d\n",
+			policy, spm_wakeup);
+	rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+	if (rc)
+		return rc;
+
+	switch (policy) {
+	case ATA_IPM_MAX_POWER:
+		/* disable all IPM transitions */
+		scontrol |= (0x3 << 8);
+		/* initiate transition to active state */
+		if (spm_wakeup) {
+			scontrol |= (0x4 << 12);
+			woken_up = true;
+		}
+		break;
+	case ATA_IPM_MED_POWER:
+		/* allow IPM to PARTIAL */
+		scontrol &= ~(0x1 << 8);
+		scontrol |= (0x2 << 8);
+		break;
+	case ATA_IPM_MIN_POWER:
+		/* no restrictions on IPM transitions */
+		scontrol &= ~(0x3 << 8);
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	ata_link_printk(link, KERN_INFO,
+			"XXX sata_link_scr_ipm: updating sctl to %x\n",
+			scontrol);
+	rc = sata_scr_write(link, SCR_CONTROL, scontrol);
+	if (rc)
+		return rc;
+
+	/* give the link time to transit out of IPM state */
+	if (woken_up) {
+		msleep(10);
+		ata_link_printk(link, KERN_INFO,
+				"XXX sata_link_scr_ipm: sleeping 10msec\n");
+	}
+
+	/* clear PHYRDY_CHG from SError */
+	ata_link_printk(link, KERN_INFO,
+			"XXX sata_link_scr_ipm: clearing serr\n");
+	ehc->i.serror &= ~SERR_PHYRDY_CHG;
+	return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
+}
+
 /**
  *	ata_std_prereset - prepare for reset
  *	@link: ATA link to be reset
@@ -4570,6 +4437,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
 	DPRINTK("EXIT, err_mask=%x\n", err_mask);
 	return err_mask;
 }
+
 /**
  *	ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES
  *	@dev: Device to which command will be sent
@@ -4585,8 +4453,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
  *	RETURNS:
  *	0 on success, AC_ERR_* mask otherwise.
  */
-static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable,
-					u8 feature)
+unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature)
 {
 	struct ata_taskfile tf;
 	unsigned int err_mask;
@@ -5436,12 +5303,6 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
 {
 	int rc;

-	/*
-	 * disable link pm on all ports before requesting
-	 * any pm activity
-	 */
-	ata_lpm_enable(host);
-
 	rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
 	if (rc == 0)
 		host->dev->power.power_state = mesg;
@@ -5464,9 +5325,6 @@ void ata_host_resume(struct ata_host *host)
 	ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET,
 			    ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
 	host->dev->power.power_state = PMSG_ON;
-
-	/* reenable link pm */
-	ata_lpm_disable(host);
 }
 #endif

@@ -6025,7 +5883,7 @@ static void async_port_probe(void *data, async_cookie_t cookie)
 		spin_lock_irqsave(ap->lock, flags);

 		ehi->probe_mask |= ATA_ALL_DEVICES;
-		ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
+		ehi->action |= ATA_EH_RESET;
 		ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;

 		ap->pflags &= ~ATA_PFLAG_INITIALIZING;
@@ -6698,6 +6556,7 @@ EXPORT_SYMBOL_GPL(sata_set_spd);
 EXPORT_SYMBOL_GPL(ata_wait_after_reset);
 EXPORT_SYMBOL_GPL(sata_link_debounce);
 EXPORT_SYMBOL_GPL(sata_link_resume);
+EXPORT_SYMBOL_GPL(sata_link_scr_ipm);
 EXPORT_SYMBOL_GPL(ata_std_prereset);
 EXPORT_SYMBOL_GPL(sata_link_hardreset);
 EXPORT_SYMBOL_GPL(sata_std_hardreset);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index f77a673..bd77d94 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1568,14 +1568,15 @@ static void ata_eh_analyze_serror(struct ata_link *link)
 		action |= ATA_EH_RESET;
 	}

-	/* Determine whether a hotplug event has occurred.  Both
+	/*
+	 * Determine whether a hotplug event has occurred.  Both
 	 * SError.N/X are considered hotplug events for enabled or
 	 * host links.  For disabled PMP links, only N bit is
 	 * considered as X bit is left at 1 for link plugging.
 	 */
-	hotplug_mask = 0;
-
-	if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
+	if (link->ipm_policy != ATA_IPM_MAX_POWER)
+		hotplug_mask = 0;	/* hotplug doesn't work w/ IPM */
+	else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
 		hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG;
 	else
 		hotplug_mask = SERR_PHYRDY_CHG;
@@ -2776,8 +2777,9 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ata_eh_done(link, NULL, ATA_EH_RESET);
 	if (slave)
 		ata_eh_done(slave, NULL, ATA_EH_RESET);
-	ehc->last_reset = jiffies;	/* update to completion time */
+	ehc->last_reset = jiffies;		/* update to completion time */
 	ehc->i.action |= ATA_EH_REVALIDATE;
+	link->ipm_policy = ATA_IPM_UNKNOWN;	/* reset IPM state */

 	rc = 0;
  out:
@@ -3203,6 +3205,124 @@ static int ata_eh_maybe_retry_flush(struct ata_device *dev)
 	return rc;
 }

+/**
+ *	ata_eh_set_ipm - configure SATA interface power management
+ *	@link: link to configure power management
+ *	@policy: the link power management policy
+ *	@r_failed_dev: out parameter for failed device
+ *
+ *	Enable SATA Interface power management.  This will enable
+ *	Device Interface Power Management (DIPM) for min_power
+ * 	policy, and then call driver specific callbacks for
+ *	enabling Host Initiated Power management.
+ *
+ *	LOCKING:
+ *	EH context.
+ *
+ *	RETURNS:
+ *	0 on success, -errno on failure.
+ */
+static int ata_eh_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
+			  struct ata_device **r_failed_dev)
+{
+	struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
+	struct ata_eh_context *ehc = &link->eh_context;
+	struct ata_device *dev, *link_dev = NULL, *ipm_dev = NULL;
+	unsigned int hints = ATA_IPM_EMPTY | ATA_IPM_HIPM;
+	unsigned int err_mask;
+	int rc;
+
+	/* if the link or host doesn't do IPM, noop */
+	if ((link->flags & ATA_LFLAG_NO_IPM) || (ap && !ap->ops->set_ipm))
+		return 0;
+
+	/*
+	 * DIPM is enabled only for MIN_POWER as some devices
+	 * misbehave when the host NACKs transition to SLUMBER.  Order
+	 * device and link configurations such that the host always
+	 * allows DIPM requests.
+	 */
+	ata_for_each_dev(dev, link, ENABLED) {
+		bool hipm = ata_id_has_hipm(dev->id);
+		bool dipm = ata_id_has_dipm(dev->id);
+
+		/* find the first enabled and IPM enabled devices */
+		if (!link_dev)
+			link_dev = dev;
+
+		if (!ipm_dev && (hipm || dipm))
+			ipm_dev = dev;
+
+		hints &= ~ATA_IPM_EMPTY;
+		if (!hipm)
+			hints &= ~ATA_IPM_HIPM;
+
+		/* disable DIPM before changing link config */
+		if (policy != ATA_IPM_MIN_POWER && dipm) {
+			ata_dev_printk(dev, KERN_INFO, "XXX ata_eh_set_ipm: disabling DIPM\n");
+			err_mask = ata_dev_set_feature(dev,
+					SETFEATURES_SATA_DISABLE, SATA_DIPM);
+			if (err_mask && err_mask != AC_ERR_DEV) {
+				ata_dev_printk(dev, KERN_WARNING,
+					       "error while disabling DIPM\n");
+				rc = -EIO;
+				goto fail;
+			}
+		}
+	}
+
+	if (ap) {
+		rc = ap->ops->set_ipm(link, policy, hints);
+		if (!rc && ap->slave_link)
+			rc = ap->ops->set_ipm(ap->slave_link, policy, hints);
+	} else
+		rc = sata_pmp_set_ipm(link, policy, hints);
+
+	/*
+	 * Attribute link config failure to the first (IPM) enabled
+	 * device on the link.
+	 */
+	if (rc) {
+		if (rc == -EOPNOTSUPP) {
+			link->flags |= ATA_LFLAG_NO_IPM;
+			return 0;
+		}
+		dev = ipm_dev ? ipm_dev : link_dev;
+		goto fail;
+	}
+
+	/* host config updated, enable DIPM if transitioning to MIN_POWER */
+	ata_for_each_dev(dev, link, ENABLED) {
+		if (policy == ATA_IPM_MIN_POWER && ata_id_has_dipm(dev->id)) {
+			ata_dev_printk(dev, KERN_INFO, "XXX ata_eh_set_ipm: enabling DIPM\n");
+			err_mask = ata_dev_set_feature(dev,
+					SETFEATURES_SATA_ENABLE, SATA_DIPM);
+			if (err_mask && err_mask != AC_ERR_DEV) {
+				ata_dev_printk(dev, KERN_WARNING,
+					       "error while enabling DIPM\n");
+				rc = -EIO;
+				goto fail;
+			}
+		}
+	}
+
+	link->ipm_policy = policy;
+	if (ap && ap->slave_link)
+		ap->slave_link->ipm_policy = policy;
+	return 0;
+
+fail:
+	/* if no device or the last chance for the device, disable IPM */
+	if (!dev || ehc->tries[dev->devno] == 1) {
+		ata_link_printk(link, KERN_WARNING,
+				"disabling IPM on the link\n");
+		link->flags |= ATA_LFLAG_NO_IPM;
+	}
+	if (r_failed_dev)
+		*r_failed_dev = dev;
+	return rc;
+}
+
 static int ata_link_nr_enabled(struct ata_link *link)
 {
 	struct ata_device *dev;
@@ -3283,6 +3403,16 @@ static int ata_eh_schedule_probe(struct ata_device *dev)
 	ehc->saved_xfer_mode[dev->devno] = 0;
 	ehc->saved_ncq_enabled &= ~(1 << dev->devno);

+	/* the link maybe in a deep sleep, wake it up */
+	if (link->ipm_policy > ATA_IPM_MAX_POWER) {
+		if (ata_is_host_link(link))
+			link->ap->ops->set_ipm(link, ATA_IPM_MAX_POWER,
+					       ATA_IPM_EMPTY);
+		else
+			sata_pmp_set_ipm(link, ATA_IPM_MAX_POWER,
+					 ATA_IPM_EMPTY);
+	}
+
 	/* Record and count probe trials on the ering.  The specific
 	 * error mask used is irrelevant.  Because a successful device
 	 * detection clears the ering, this count accumulates only if
@@ -3384,8 +3514,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 {
 	struct ata_link *link;
 	struct ata_device *dev;
-	int nr_failed_devs;
-	int rc;
+	int rc, nr_fails;
 	unsigned long flags, deadline;

 	DPRINTK("ENTER\n");
@@ -3426,7 +3555,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,

  retry:
 	rc = 0;
-	nr_failed_devs = 0;

 	/* if UNLOADING, finish immediately */
 	if (ap->pflags & ATA_PFLAG_UNLOADING)
@@ -3511,13 +3639,17 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 	}

 	/* the rest */
-	ata_for_each_link(link, ap, EDGE) {
+	nr_fails = 0;
+	ata_for_each_link(link, ap, PMP_FIRST) {
 		struct ata_eh_context *ehc = &link->eh_context;

+		if (sata_pmp_attached(ap) && ata_is_host_link(link))
+			goto config_ipm;
+
 		/* revalidate existing devices and attach new ones */
 		rc = ata_eh_revalidate_and_attach(link, &dev);
 		if (rc)
-			goto dev_fail;
+			goto rest_fail;

 		/* if PMP got attached, return, pmp EH will take care of it */
 		if (link->device->class == ATA_DEV_PMP) {
@@ -3529,7 +3661,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 		if (ehc->i.flags & ATA_EHI_SETMODE) {
 			rc = ata_set_mode(link, &dev);
 			if (rc)
-				goto dev_fail;
+				goto rest_fail;
 			ehc->i.flags &= ~ATA_EHI_SETMODE;
 		}

@@ -3542,7 +3674,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 					continue;
 				rc = atapi_eh_clear_ua(dev);
 				if (rc)
-					goto dev_fail;
+					goto rest_fail;
 			}
 		}

@@ -3552,21 +3684,25 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 				continue;
 			rc = ata_eh_maybe_retry_flush(dev);
 			if (rc)
-				goto dev_fail;
+				goto rest_fail;
 		}

+	config_ipm:
 		/* configure link power saving */
-		if (ehc->i.action & ATA_EH_LPM)
-			ata_for_each_dev(dev, link, ALL)
-				ata_dev_enable_pm(dev, ap->pm_policy);
+		if (link->ipm_policy != ap->target_ipm_policy) {
+			rc = ata_eh_set_ipm(link, ap->target_ipm_policy, &dev);
+			if (rc)
+				goto rest_fail;
+		}

 		/* this link is okay now */
 		ehc->i.flags = 0;
 		continue;

-dev_fail:
-		nr_failed_devs++;
-		ata_eh_handle_dev_fail(dev, rc);
+	rest_fail:
+		nr_fails++;
+		if (dev)
+			ata_eh_handle_dev_fail(dev, rc);

 		if (ap->pflags & ATA_PFLAG_FROZEN) {
 			/* PMP reset requires working host port.
@@ -3578,7 +3714,7 @@ dev_fail:
 		}
 	}

-	if (nr_failed_devs)
+	if (nr_fails)
 		goto retry;

  out:
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 224faab..06a66ca 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -185,6 +185,27 @@ int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
 }

 /**
+ *	sata_pmp_set_ipm - configure IPM for a PMP link
+ *	@link: PMP link to configure IPM for
+ *	@policy: target IPM policy
+ *	@hints: IPM hints
+ *
+ *	Configure IPM for @link.  This function will contain any PMP
+ *	specific workarounds if necessary.
+ *
+ *	LOCKING:
+ *	EH context.
+ *
+ *	RETURNS:
+ *	0 on success, -errno on failure.
+ */
+int sata_pmp_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
+		     unsigned hints)
+{
+	return sata_link_scr_ipm(link, policy, true);
+}
+
+/**
  *	sata_pmp_read_gscr - read GSCR block of SATA PMP
  *	@dev: PMP device
  *	@gscr: buffer to read GSCR block into
@@ -351,6 +372,9 @@ static void sata_pmp_quirks(struct ata_port *ap)
 	if (vendor == 0x1095 && devid == 0x3726) {
 		/* sil3726 quirks */
 		ata_for_each_link(link, ap, EDGE) {
+			/* link reports offline after IPM */
+			link->flags |= ATA_LFLAG_NO_IPM;
+
 			/* Class code report is unreliable and SRST
 			 * times out under certain configurations.
 			 */
@@ -366,6 +390,9 @@ static void sata_pmp_quirks(struct ata_port *ap)
 	} else if (vendor == 0x1095 && devid == 0x4723) {
 		/* sil4723 quirks */
 		ata_for_each_link(link, ap, EDGE) {
+			/* link reports offline after IPM */
+			link->flags |= ATA_LFLAG_NO_IPM;
+
 			/* class code report is unreliable */
 			if (link->pmp < 2)
 				link->flags |= ATA_LFLAG_ASSUME_ATA;
@@ -378,6 +405,9 @@ static void sata_pmp_quirks(struct ata_port *ap)
 	} else if (vendor == 0x1095 && devid == 0x4726) {
 		/* sil4726 quirks */
 		ata_for_each_link(link, ap, EDGE) {
+			/* link reports offline after IPM */
+			link->flags |= ATA_LFLAG_NO_IPM;
+
 			/* Class code report is unreliable and SRST
 			 * times out under certain configurations.
 			 * Config device can be at port 0 or 5 and
@@ -938,15 +968,26 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
 	if (rc)
 		goto link_fail;

-	/* Connection status might have changed while resetting other
-	 * links, check SATA_PMP_GSCR_ERROR before returning.
-	 */
-
+	
 	/* clear SNotification */
 	rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf);
 	if (rc == 0)
 		sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf);

+	/*
+	 * If IPM is active on any fan-out port, hotplug wouldn't
+	 * work.  Return w/ PHY event notification disabled.
+	 */
+	ata_for_each_link(link, ap, EDGE)
+		if (link->ipm_policy > ATA_IPM_MAX_POWER)
+			return 0;
+
+	/*
+	 * Connection status might have changed while resetting other
+	 * links, enable notification and check SATA_PMP_GSCR_ERROR
+	 * before returning.
+	 */
+
 	/* enable notification */
 	if (pmp_dev->flags & ATA_DFLAG_AN) {
 		gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a54273d..8801342 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -116,73 +116,55 @@ static struct scsi_transport_template ata_scsi_transport_template = {
 	.user_scan		= ata_scsi_user_scan,
 };

-
-static const struct {
-	enum link_pm	value;
-	const char	*name;
-} link_pm_policy[] = {
-	{ NOT_AVAILABLE, "max_performance" },
-	{ MIN_POWER, "min_power" },
-	{ MAX_PERFORMANCE, "max_performance" },
-	{ MEDIUM_POWER, "medium_power" },
+static const char *ata_ipm_policy_names[] = {
+	[ATA_IPM_UNKNOWN]	= "max_performance",
+	[ATA_IPM_MAX_POWER]	= "max_performance",
+	[ATA_IPM_MED_POWER]	= "medium_power",
+	[ATA_IPM_MIN_POWER]	= "min_power",
 };

-static const char *ata_scsi_lpm_get(enum link_pm policy)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(link_pm_policy); i++)
-		if (link_pm_policy[i].value == policy)
-			return link_pm_policy[i].name;
-
-	return NULL;
-}
-
-static ssize_t ata_scsi_lpm_put(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf, size_t count)
+static ssize_t ata_scsi_ipm_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
 {
 	struct Scsi_Host *shost = class_to_shost(dev);
 	struct ata_port *ap = ata_shost_to_port(shost);
-	enum link_pm policy = 0;
-	int i;
+	enum ata_ipm_policy policy;
+	unsigned long flags;

-	/*
-	 * we are skipping array location 0 on purpose - this
-	 * is because a value of NOT_AVAILABLE is displayed
-	 * to the user as max_performance, but when the user
-	 * writes "max_performance", they actually want the
-	 * value to match MAX_PERFORMANCE.
-	 */
-	for (i = 1; i < ARRAY_SIZE(link_pm_policy); i++) {
-		const int len = strlen(link_pm_policy[i].name);
-		if (strncmp(link_pm_policy[i].name, buf, len) == 0) {
-			policy = link_pm_policy[i].value;
+	/* UNKNOWN is internal state, iterate from MAX_POWER */
+	for (policy = ATA_IPM_MAX_POWER;
+	     policy < ARRAY_SIZE(ata_ipm_policy_names); policy++) {
+		const char *name = ata_ipm_policy_names[policy];
+
+		if (strncmp(name, buf, strlen(name)) == 0)
 			break;
-		}
 	}
-	if (!policy)
+	if (policy == ARRAY_SIZE(ata_ipm_policy_names))
 		return -EINVAL;

-	ata_lpm_schedule(ap, policy);
+	spin_lock_irqsave(ap->lock, flags);
+	ap->target_ipm_policy = policy;
+	ata_port_schedule_eh(ap);
+	spin_unlock_irqrestore(ap->lock, flags);
+
 	return count;
 }

-static ssize_t
-ata_scsi_lpm_show(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t ata_scsi_ipm_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
 {
 	struct Scsi_Host *shost = class_to_shost(dev);
 	struct ata_port *ap = ata_shost_to_port(shost);
-	const char *policy =
-		ata_scsi_lpm_get(ap->pm_policy);

-	if (!policy)
+	if (ap->target_ipm_policy >= ARRAY_SIZE(ata_ipm_policy_names))
 		return -EINVAL;

-	return snprintf(buf, 23, "%s\n", policy);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			ata_ipm_policy_names[ap->target_ipm_policy]);
 }
 DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
-		ata_scsi_lpm_show, ata_scsi_lpm_put);
+	    ata_scsi_ipm_show, ata_scsi_ipm_store);
 EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);

 static ssize_t ata_scsi_park_show(struct device *device,
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 4b84ed6..2dd0dfe 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -87,6 +87,8 @@ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 extern int ata_dev_configure(struct ata_device *dev);
 extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
 extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
+extern unsigned int ata_dev_set_feature(struct ata_device *dev,
+					u8 enable, u8 feature);
 extern void ata_sg_clean(struct ata_queued_cmd *qc);
 extern void ata_qc_free(struct ata_queued_cmd *qc);
 extern void ata_qc_issue(struct ata_queued_cmd *qc);
@@ -101,8 +103,6 @@ extern int sata_link_init_spd(struct ata_link *link);
 extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern struct ata_port *ata_port_alloc(struct ata_host *host);
-extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy);
-extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm);

 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
@@ -170,6 +170,8 @@ extern void ata_eh_finish(struct ata_port *ap);
 #ifdef CONFIG_SATA_PMP
 extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val);
 extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val);
+extern int sata_pmp_set_ipm(struct ata_link *link, enum ata_ipm_policy policy,
+			    unsigned hints);
 extern int sata_pmp_attach(struct ata_device *dev);
 #else /* CONFIG_SATA_PMP */
 static inline int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val)
@@ -182,6 +184,12 @@ static inline int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
 	return -EINVAL;
 }

+static inline int sata_pmp_set_ipm(struct ata_link *link,
+				   enum ata_ipm_policy policy, unsigned hints)
+{
+	return -EINVAL;
+}
+
 static inline int sata_pmp_attach(struct ata_device *dev)
 {
 	return -EINVAL;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b85f3ff..1f90dc5 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -172,6 +172,7 @@ enum {
 	ATA_LFLAG_NO_RETRY	= (1 << 5), /* don't retry this link */
 	ATA_LFLAG_DISABLED	= (1 << 6), /* link is disabled */
 	ATA_LFLAG_SW_ACTIVITY	= (1 << 7), /* keep activity stats */
+	ATA_LFLAG_NO_IPM	= (1 << 8), /* disable IPM on this link */

 	/* struct ata_port flags */
 	ATA_FLAG_SLAVE_POSS	= (1 << 0), /* host supports slave dev */
@@ -324,12 +325,11 @@ enum {
 	ATA_EH_HARDRESET	= (1 << 2), /* meaningful only in ->prereset */
 	ATA_EH_RESET		= ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
 	ATA_EH_ENABLE_LINK	= (1 << 3),
-	ATA_EH_LPM		= (1 << 4),  /* link power management action */
 	ATA_EH_PARK		= (1 << 5), /* unload heads and stop I/O */

 	ATA_EH_PERDEV_MASK	= ATA_EH_REVALIDATE | ATA_EH_PARK,
 	ATA_EH_ALL_ACTIONS	= ATA_EH_REVALIDATE | ATA_EH_RESET |
-				  ATA_EH_ENABLE_LINK | ATA_EH_LPM,
+				  ATA_EH_ENABLE_LINK,

 	/* ata_eh_info->flags */
 	ATA_EHI_HOTPLUGGED	= (1 << 0),  /* could have been hotplugged */
@@ -376,7 +376,6 @@ enum {
 	ATA_HORKAGE_BROKEN_HPA	= (1 << 4),	/* Broken HPA */
 	ATA_HORKAGE_DISABLE	= (1 << 5),	/* Disable it */
 	ATA_HORKAGE_HPA_SIZE	= (1 << 6),	/* native size off by one */
-	ATA_HORKAGE_IPM		= (1 << 7),	/* Link PM problems */
 	ATA_HORKAGE_IVB		= (1 << 8),	/* cbl det validity bit bugs */
 	ATA_HORKAGE_STUCK_ERR	= (1 << 9),	/* stuck ERR on next PACKET */
 	ATA_HORKAGE_BRIDGE_OK	= (1 << 10),	/* no bridge limits */
@@ -463,6 +462,22 @@ enum ata_completion_errors {
 	AC_ERR_NCQ		= (1 << 10), /* marker for offending NCQ qc */
 };

+/*
+ * Link pm policy: If you alter this, you also need to alter
+ * libata-scsi.c (for the ascii descriptions)
+ */
+enum ata_ipm_policy {
+	ATA_IPM_UNKNOWN,
+	ATA_IPM_MAX_POWER,
+	ATA_IPM_MED_POWER,
+	ATA_IPM_MIN_POWER,
+};
+
+enum ata_ipm_hints {
+	ATA_IPM_EMPTY		= (1 << 0), /* port empty/probing */
+	ATA_IPM_HIPM		= (1 << 1), /* may use HIPM */
+};
+
 /* forward declarations */
 struct scsi_device;
 struct ata_port_operations;
@@ -477,16 +492,6 @@ typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes,
 			      unsigned long deadline);
 typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes);

-/*
- * host pm policy: If you alter this, you also need to alter libata-scsi.c
- * (for the ascii descriptions)
- */
-enum link_pm {
-	NOT_AVAILABLE,
-	MIN_POWER,
-	MAX_PERFORMANCE,
-	MEDIUM_POWER,
-};
 extern struct device_attribute dev_attr_link_power_management_policy;
 extern struct device_attribute dev_attr_unload_heads;
 extern struct device_attribute dev_attr_em_message_type;
@@ -698,6 +703,7 @@ struct ata_link {
 	unsigned int		hw_sata_spd_limit;
 	unsigned int		sata_spd_limit;
 	unsigned int		sata_spd;	/* current SATA PHY speed */
+	enum ata_ipm_policy	ipm_policy;

 	/* record runtime error info, protected by host_set lock */
 	struct ata_eh_info	eh_info;
@@ -764,7 +770,7 @@ struct ata_port {

 	pm_message_t		pm_mesg;
 	int			*pm_result;
-	enum link_pm		pm_policy;
+	enum ata_ipm_policy	target_ipm_policy;

 	struct timer_list	fastdrain_timer;
 	unsigned long		fastdrain_cnt;
@@ -830,8 +836,8 @@ struct ata_port_operations {
 	int  (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val);
 	void (*pmp_attach)(struct ata_port *ap);
 	void (*pmp_detach)(struct ata_port *ap);
-	int  (*enable_pm)(struct ata_port *ap, enum link_pm policy);
-	void (*disable_pm)(struct ata_port *ap);
+	int  (*set_ipm)(struct ata_link *link, enum ata_ipm_policy policy,
+			unsigned hints);

 	/*
 	 * Start, stop, suspend and resume
@@ -943,6 +949,8 @@ extern int sata_link_debounce(struct ata_link *link,
 			const unsigned long *params, unsigned long deadline);
 extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
 			    unsigned long deadline);
+extern int sata_link_scr_ipm(struct ata_link *link, enum ata_ipm_policy policy,
+			     bool spm_wakeup);
 extern int sata_link_hardreset(struct ata_link *link,
 			const unsigned long *timing, unsigned long deadline,
 			bool *online, int (*check_ready)(struct ata_link *));
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux