From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> Subject: [PATCH] pata_it8213: fix UDMA handling Driver should program the cycle timing not the mode number (doing the latter results in wrong timings being used). There shouldn't be any problems with it as IDE it8213 host driver has been doing it this way for years. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> --- drivers/ata/pata_it8213.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) Index: b/drivers/ata/pata_it8213.c =================================================================== --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -173,10 +173,10 @@ static void it8213_set_dmamode (struct a udma_enable |= (1 << devid); - /* Load the UDMA mode number */ + /* Load the UDMA cycle time */ pci_read_config_word(dev, 0x4A, &udma_timing); udma_timing &= ~(3 << (4 * devid)); - udma_timing |= (udma & 3) << (4 * devid); + udma_timing |= u_speed << (4 * devid); pci_write_config_word(dev, 0x4A, udma_timing); /* Load the clock selection */ -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
