From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> Subject: [PATCH] pata_efar: fix wrong MWDMA timings being programmed Do not clear MWDMA timings for device on the other port when programming slave device. This change should be safe as this is how we have been doing things in IDE slc90e66 host driver for years. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> --- drivers/ata/pata_efar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Index: b/drivers/ata/pata_efar.c =================================================================== --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -201,7 +201,7 @@ static void efar_set_dmamode (struct ata master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ master_data |= control << 4; pci_read_config_byte(dev, 0x44, &slave_data); - slave_data &= (0x0F + 0xE1 * ap->port_no); + slave_data &= ap->port_no ? 0x0F : 0xF0; /* Load the matching timing */ slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); pci_write_config_byte(dev, 0x44, slave_data); -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
