Some places were using PCI_CLASS_REVISION instead of PCI_REVISION_ID, so
they weren't converted by commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65
(PCI: Change all drivers to use pci_device->revision).
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
---
The patch is against the recent Linus' tree.
drivers/ata/pata_cmd64x.c | 9 ++-------
drivers/ata/pata_hpt366.c | 8 ++------
drivers/ata/pata_hpt37x.c | 21 +++++++++------------
drivers/ata/pata_hpt3x2n.c | 15 +++++----------
drivers/ata/pata_sil680.c | 6 ++----
5 files changed, 20 insertions(+), 39 deletions(-)
Index: linux-2.6/drivers/ata/pata_cmd64x.c
===================================================================
--- linux-2.6.orig/drivers/ata/pata_cmd64x.c
+++ linux-2.6/drivers/ata/pata_cmd64x.c
@@ -294,8 +294,6 @@ static struct ata_port_operations cmd648
static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
- u32 class_rev;
-
static const struct ata_port_info cmd_info[6] = {
{ /* CMD 643 - no UDMA */
.flags = ATA_FLAG_SLAVE_POSS,
@@ -345,18 +343,15 @@ static int cmd64x_init_one(struct pci_de
if (rc)
return rc;
- pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xFF;
-
if (id->driver_data == 0) /* 643 */
ata_pci_bmdma_clear_simplex(pdev);
if (pdev->device == PCI_DEVICE_ID_CMD_646) {
/* Does UDMA work ? */
- if (class_rev > 4)
+ if (pdev->revision > 4)
ppi[0] = &cmd_info[2];
/* Early rev with other problems ? */
- else if (class_rev == 1)
+ else if (pdev->revision == 1)
ppi[0] = &cmd_info[3];
}
Index: linux-2.6/drivers/ata/pata_hpt366.c
===================================================================
--- linux-2.6.orig/drivers/ata/pata_hpt366.c
+++ linux-2.6/drivers/ata/pata_hpt366.c
@@ -344,7 +344,6 @@ static int hpt36x_init_one(struct pci_de
const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
void *hpriv = NULL;
- u32 class_rev;
u32 reg1;
int rc;
@@ -352,13 +351,10 @@ static int hpt36x_init_one(struct pci_de
if (rc)
return rc;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xFF;
-
/* May be a later chip in disguise. Check */
/* Newer chips are not in the HPT36x driver. Ignore them */
- if (class_rev > 2)
- return -ENODEV;
+ if (dev->revision > 2)
+ return -ENODEV;
hpt36x_init_chipset(dev);
Index: linux-2.6/drivers/ata/pata_hpt37x.c
===================================================================
--- linux-2.6.orig/drivers/ata/pata_hpt37x.c
+++ linux-2.6/drivers/ata/pata_hpt37x.c
@@ -790,9 +790,8 @@ static int hpt37x_init_one(struct pci_de
static const int MHz[4] = { 33, 40, 50, 66 };
void *private_data = NULL;
const struct ata_port_info *ppi[] = { NULL, NULL };
-
+ u8 rev = dev->revision;
u8 irqmask;
- u32 class_rev;
u8 mcr1;
u32 freq;
int prefer_dpll = 1;
@@ -807,19 +806,16 @@ static int hpt37x_init_one(struct pci_de
if (rc)
return rc;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xFF;
-
if (dev->device == PCI_DEVICE_ID_TTI_HPT366) {
/* May be a later chip in disguise. Check */
/* Older chips are in the HPT366 driver. Ignore them */
- if (class_rev < 3)
+ if (rev < 3)
return -ENODEV;
/* N series chips have their own driver. Ignore */
- if (class_rev == 6)
+ if (rev == 6)
return -ENODEV;
- switch(class_rev) {
+ switch(rev) {
case 3:
ppi[0] = &info_hpt370;
chip_table = &hpt370;
@@ -835,28 +831,29 @@ static int hpt37x_init_one(struct pci_de
chip_table = &hpt372;
break;
default:
- printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype please report (%d).\n", class_rev);
+ printk(KERN_ERR "pata_hpt37x: Unknown HPT366 "
+ "subtype, please report (%d).\n", rev);
return -ENODEV;
}
} else {
switch(dev->device) {
case PCI_DEVICE_ID_TTI_HPT372:
/* 372N if rev >= 2*/
- if (class_rev >= 2)
+ if (rev >= 2)
return -ENODEV;
ppi[0] = &info_hpt372;
chip_table = &hpt372a;
break;
case PCI_DEVICE_ID_TTI_HPT302:
/* 302N if rev > 1 */
- if (class_rev > 1)
+ if (rev > 1)
return -ENODEV;
ppi[0] = &info_hpt372;
/* Check this */
chip_table = &hpt302;
break;
case PCI_DEVICE_ID_TTI_HPT371:
- if (class_rev > 1)
+ if (rev > 1)
return -ENODEV;
ppi[0] = &info_hpt372;
chip_table = &hpt371;
Index: linux-2.6/drivers/ata/pata_hpt3x2n.c
===================================================================
--- linux-2.6.orig/drivers/ata/pata_hpt3x2n.c
+++ linux-2.6/drivers/ata/pata_hpt3x2n.c
@@ -446,10 +446,8 @@ static int hpt3x2n_init_one(struct pci_d
.port_ops = &hpt3x2n_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
-
+ u8 rev = dev->revision;
u8 irqmask;
- u32 class_rev;
-
unsigned int pci_mhz;
unsigned int f_low, f_high;
int adjust;
@@ -461,26 +459,23 @@ static int hpt3x2n_init_one(struct pci_d
if (rc)
return rc;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xFF;
-
switch(dev->device) {
case PCI_DEVICE_ID_TTI_HPT366:
- if (class_rev < 6)
+ if (rev < 6)
return -ENODEV;
break;
case PCI_DEVICE_ID_TTI_HPT371:
- if (class_rev < 2)
+ if (rev < 2)
return -ENODEV;
/* 371N if rev > 1 */
break;
case PCI_DEVICE_ID_TTI_HPT372:
/* 372N if rev >= 2*/
- if (class_rev < 2)
+ if (rev < 2)
return -ENODEV;
break;
case PCI_DEVICE_ID_TTI_HPT302:
- if (class_rev < 2)
+ if (rev < 2)
return -ENODEV;
break;
case PCI_DEVICE_ID_TTI_HPT372N:
Index: linux-2.6/drivers/ata/pata_sil680.c
===================================================================
--- linux-2.6.orig/drivers/ata/pata_sil680.c
+++ linux-2.6/drivers/ata/pata_sil680.c
@@ -212,13 +212,11 @@ static struct ata_port_operations sil680
static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
{
- u32 class_rev = 0;
u8 tmpbyte = 0;
- pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
/* FIXME: double check */
- pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255);
+ pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
+ pdev->revision ? 1 : 255);
pci_write_config_byte(pdev, 0x80, 0x00);
pci_write_config_byte(pdev, 0x84, 0x00);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
