Alan Cox reported that cable detection sometimes works unreliably
for HPT3xxN and that the issue is fixed by adding debounce delay
as used by the vendor drivers.
While at it, get rid of unneeded parens/space in the vicinity...
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxx
---
The patcn is atop of ide-2.6.git tree...
drivers/ide/hpt366.c | 12 +++++++-----
1 files changed, 7 insertions(+), 5 deletions(-)
Index: ide-2.6/drivers/ide/hpt366.c
===================================================================
--- ide-2.6.orig/drivers/ide/hpt366.c
+++ ide-2.6/drivers/ide/hpt366.c
@@ -1236,8 +1236,9 @@ static u8 hpt3xx_cable_detect(ide_hwif_t
u16 mcr;
pci_read_config_word(dev, mcr_addr, &mcr);
- pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
- /* now read cable id register */
+ pci_write_config_word(dev, mcr_addr, mcr | 0x8000);
+ /* Debounce, then read cable ID register */
+ udelay(10);
pci_read_config_byte(dev, 0x5a, &scr1);
pci_write_config_word(dev, mcr_addr, mcr);
} else if (chip_type >= HPT370) {
@@ -1248,10 +1249,11 @@ static u8 hpt3xx_cable_detect(ide_hwif_t
u8 scr2 = 0;
pci_read_config_byte(dev, 0x5b, &scr2);
- pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
- /* now read cable id register */
+ pci_write_config_byte(dev, 0x5b, scr2 & ~1);
+ /* Debounce, then read cable ID register */
+ udelay(10);
pci_read_config_byte(dev, 0x5a, &scr1);
- pci_write_config_byte(dev, 0x5b, scr2);
+ pci_write_config_byte(dev, 0x5b, scr2);
} else
pci_read_config_byte(dev, 0x5a, &scr1);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
