On 11/03/2009 03:34 PM, Peter Klotz wrote:
Hello My port multiplier capable eSATA Express Card refuses to talk to my external HDD box (2 HDDs, JBOD mode). Inserting the card into the Express Card slot looks normal: [ 622.549794] pciehp 0000:00:1c.2:pcie04: Card present on Slot(0) [ 622.698856] sata_sil24 0000:03:00.0: enabling device (0100 -> 0103) [ 622.698873] sata_sil24 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 622.702334] scsi8 : sata_sil24 [ 622.709268] scsi9 : sata_sil24 [ 622.709409] ata7: SATA max UDMA/100 host m128@0xfd804000 port 0xfd800000 irq 18 [ 622.709418] ata8: SATA max UDMA/100 host m128@0xfd804000 port 0xfd802000 irq 18 [ 624.800150] ata7: SATA link down (SStatus 0 SControl 0) [ 626.890131] ata8: SATA link down (SStatus 0 SControl 0) Turning on the external box results in lots of errors: [ 666.030153] ata8: hard resetting link [ 668.250125] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 668.250949] ata8.15: Port Multiplier 1.1, 0x1095:0x5744 r33, 3 ports, feat 0x1/0x9 [ 668.251251] ata8.15: applying bridge limits [ 668.251340] ata8.00: hard resetting link [ 668.720140] ata8.00: failed to read SCR 0 (Emask=0x40) [ 668.720156] ata8.15: hard resetting link [ 668.720161] ata8: controller in dubious state, performing PORT_RST
Which kernel version is this? Can you test latest git? -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
