> > 1) Add a way for the ATA layer to create compat device > > nodes so that people can change over to use the ATA > > layer for their devices without any fstab et al. changes. > > > > These compat device nodes do not have to be so featureful > > that they support hdparm or smartd or anything like that, > > but they need to work well enough to mount filesystems, and > > mount swap partitions, and interact with device management > > systems like udev as if they were real IDE devices. > > I'm not really sure if this is worthwhile.. is having to update fstab > really so onerous as to be worth the trouble? You'd presumably have to > enable the creation of the compat device nodes somehow (enabling them > by default seems like it would cause a lot of confusion), so it's not > like you wouldn't need any config changes that way, either. Not worth the pain or the code complexity. Almost no system today hard codes the identifiers. For those that do you can use a udev rule to make symlinks. > > 2) The two or so remaining devices which have IDE support but > > don't have an ATA layer driver need porting. > > Has anyone gone through and made a list of these? pmac seems like the > most obvious one.. Pmac is probably the only one that matters. It basically needs an alternate set of DMA sg drivers for the MAC DMA, the rest is very "normal". The other is SGIIOC4 which I doubt anyone cares about. There are a few other things that I think could do with addressing particularly better IRQ unmasking for both polled PIO (embedded devices) and interrupt driven PIO on relatively sane hardware would be helpful particularly in the embedded world. IDE will self correct in time anyway - new hardware doesn't work with it, newer embedded devices are also moving away from compact flash, so it'll die of its own accord. As such while things like pmac support in libata will be nice I don't think there is any need to go around obsoleting it or pressuring people to move stacks. Alan -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
