Use excl_link when non NCQ commands are defered, to be sure they are processed as soon as outstanding commands are completed. It prevents some commands to be defered indifinitely when using a port multiplier. Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxx> --- drivers/ata/sata_mv.c | 29 +++++++++++++++++++++++++++-- 1 files changed, 27 insertions(+), 2 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 17f9ff9..6f5093b 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1382,6 +1382,25 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) */ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) return ATA_DEFER_PORT; + + /* PIO commands need exclusive link: no other commands [DMA or PIO] + * can run concurrently. + * set excl_link when we want to send a PIO command in DMA mode + * or a non-NCQ command in NCQ mode. + * When we receive a command from that link, and there are no + * outstanding commands, mark a flag to clear excl_link and let + * the command go through. + */ + if (unlikely(ap->excl_link)) { + if (link == ap->excl_link) { + if (ap->nr_active_links) + return ATA_DEFER_PORT; + qc->flags |= ATA_QCFLAG_CLEAR_EXCL; + return 0; + } else + return ATA_DEFER_PORT; + } + /* * If the port is completely idle, then allow the new qc. */ @@ -1395,8 +1414,14 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) * doesn't allow it. */ if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) && - (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol)) - return 0; + (pp->pp_flags & MV_PP_FLAG_NCQ_EN)) { + if (ata_is_ncq(qc->tf.protocol)) + return 0; + else { + ap->excl_link = link; + return ATA_DEFER_PORT; + } + } return ATA_DEFER_PORT; } -- 1.5.4.3 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html