From: John(Jung-Ik) Lee <jilee@xxxxxxxxxx> Subject: [PATCH] pata_atp867x: clarifications in timings calculations and cable detection Signed-off-by: John(Jung-Ik) Lee <jilee@xxxxxxxxxx> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> --- drivers/ata/pata_atp867x.c | 52 ++++++++++++++++++++++++++++++++------------- 1 file changed, 38 insertions(+), 14 deletions(-) Index: b/drivers/ata/pata_atp867x.c =================================================================== --- a/drivers/ata/pata_atp867x.c +++ b/drivers/ata/pata_atp867x.c @@ -149,8 +149,10 @@ static void atp867x_set_dmamode(struct a iowrite8(b, dp->dma_mode); } -static int atp867x_get_active_clocks_shifted(unsigned int clk) +static int atp867x_get_active_clocks_shifted(struct ata_port *ap, + unsigned int clk) { + struct atp867x_priv *dp = ap->private_data; unsigned char clocks = clk; switch (clocks) { @@ -159,15 +161,25 @@ static int atp867x_get_active_clocks_shi break; case 1 ... 7: break; - case 8 ... 12: + case 9 ... 12: clocks = 7; break; default: printk(KERN_WARNING "ATP867X: active %dclk is invalid. " "Using default 8clk.\n", clk); - clocks = 0; /* 8 clk */ - break; + case 8: /* default 8 clk */ + clocks = 0; + goto active_clock_shift_done; } + + /* + * Doc 6.6.9: increase the clock value by 1 for safer PIO speed + * on 66MHz bus + */ + if (dp->pci66mhz && clocks < 7) + clocks++; + +active_clock_shift_done: return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT; } @@ -181,20 +193,19 @@ static int atp867x_get_recover_clocks_sh break; case 1 ... 11: break; - case 12: - clocks = 0; - break; case 13: case 14: - --clocks; + --clocks; /* by the spec */ break; case 15: break; default: printk(KERN_WARNING "ATP867X: recover %dclk is invalid. " - "Using default 15clk.\n", clk); - clocks = 0; /* 12 clk */ + "Using default 12clk.\n", clk); + case 12: /* default 12 clk */ + clocks = 0; break; } + return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT; } @@ -223,10 +234,8 @@ static void atp867x_set_piomode(struct a b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK); iowrite8(b, dp->dma_mode); - b = atp867x_get_active_clocks_shifted(t.active) | + b = atp867x_get_active_clocks_shifted(ap, t.active) | atp867x_get_recover_clocks_shifted(t.recover); - if (dp->pci66mhz) - b += 0x10; if (adev->devno & 1) iowrite8(b, dp->slave_piospd); @@ -239,9 +248,24 @@ static void atp867x_set_piomode(struct a iowrite8(b, dp->eightb_piospd); } +static int atp867x_cable_override(struct pci_dev *pdev) +{ + if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP && + (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A || + pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) { + return 1; + } + return 0; +} + static int atp867x_cable_detect(struct ata_port *ap) { - return ATA_CBL_PATA40_SHORT; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (atp867x_cable_override(pdev)) + return ATA_CBL_PATA40_SHORT; + + return ATA_CBL_PATA_UNK; } static struct scsi_host_template atp867x_sht = { -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html