On 09/24/2009 04:34 PM, Ed Tomlinson wrote:
Hi,
I just had a strange freeze with 2.6.31.1-rc1. Looking at the console log from startup I see that ata4& ata5 have nothing connected.
Later while working the box stalled. Checking the serial console I say messages from ata4& ata5... There really is nothing plugged
into the connectors. Any ideas on what might have happened?
Thanks
Ed
From startup:
Missing the part that says which driver this is. Can you post the full
boot log?
[ 2.138060] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.138064] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.138417] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.138818] ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
[ 2.138820] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.140637] ata3.00: configured for UDMA/133
[ 2.142441] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.153147] ata2.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133
[ 2.153150] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 1)
[ 2.153878] ata2.00: configured for UDMA/133
[ 2.198790] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.545040] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.556880] ata1.00: ATA-7: Maxtor 6L250S0, BACE1G10, max UDMA/133
[ 2.566684] ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.580221] ata1.00: configured for UDMA/133
Last messages before it stalled:
[49844.950401] ata4: exception Emask 0x73 SAct 0x0 SErr 0xffffffff action 0xe frozen
[49844.950630] ata5: exception Emask 0x73 SAct 0x0 SErr 0xffffffff action 0xe frozen
[49844.950677] ata5: irq_stat 0xffffffff, unknown FIS 00000000 00000000 00000000 00000000, host bus
[49844.950725] ata5: SError: { RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC
[49844.950863] ata5: hard resett
The registers returning all ones suggests the hardware somehow went away
or stopped responding to reads properly..
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
