Yan Seiner wrote: > Yinghai Lu wrote: >> Yan Seiner wrote: >> >>> On Wed, January 21, 2009 9:07 pm, Yinghai Lu wrote: >>> >>>> please try -v3 and boot with debug in command line, then post bootlog. >>>> >>> Dumb question: >>> >>> Where does the debug parameter go? Kernel command line? >>> >> >> in your /boot/grub/grub.conf >> every boot entry will have append line to let you add some boot >> parameter. add "debug" in those line, and remove quiet etc. >> >> YH >> >> !DSPAM:4978ac48230791804284693! >> >> > To recap, I've applied the latest patch (-v3) that's supposed to make > the SGPIO work. I am using a LIB-700 backplane from Norco: > > http://www.ipcdirect.net/servlet/Detail?no=75 > http://www.norco.net.cn/UpLoadFile/Datasheet/DS-600S-EN.pdf > > The disk activity LEDs stay lit all the time. > > I am running a vanilla kernel, not a debian kernel,. although it was > built using debian's kbuild. > > title Debian GNU/Linux, kernel 2.6.28.1 > root (hd0,1) > kernel /vmlinuz-2.6.28.1 root=/dev/md0 ro debug > initrd /initrd.img-2.6.28.1 > > log files are at > > http://seiner.com/sata_nv/syslog > http://seiner.com/sata_nv/dmesg.log [ 19.306367] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 19.306472] sata_nv 0000:00:05.0: Using SWNCQ mode [ 19.306895] sata_nv 0000:00:05.0: setting latency timer to 64 [ 19.311020] scsi5 : sata_nv it seems that your system HW is not using SGPIO... my setup has more print out... YH -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html