Yan Seiner wrote: > Yinghai Lu wrote: >> Yan Seiner wrote: >> >>> Yinghai Lu wrote: >>> >>>> Impact: new features >>>> >>>> based on patch on >>>> http://marc.info/?l=linux-ide&m=116289338705418&w=2 >>>> >>>> 1. update the patch for 2.6.19 to latest upstream ( 2.6.28?) >>>> 2. fix shared sgpio to support several mcp55 + io55, so every mcp55 >>>> have >>>> seperate spinlock >>>> 3. use scratch_source as numbering of sgpio instead of address of >>>> struct, >>>> so could go through kexec/kdump >>>> >>>> v2: revert NV_ON and NV_OFF, so turn on Activity LED all the time when >>>> disk is idle. >>>> >>> I've tried both this patch and the previous version; neither does >>> anything for me. I am patching a vanilla 2.6.28.1 kernel. :-( >>> >>> I am running an Asus M2N-SLI Deluxe: >>> >>> 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) >>> 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) >>> 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) >>> 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) >>> >>> All 6 channels are in use. All of the drive activity lights are lit all >>> the time. >>> >> >> can you boot with "debug" in command line? >> >> wonder if your system has SGPIO etc backplane. >> > It has a Norco LIB-700 backplane. The backplane claims to have drive > activity LEDs as well as power LEDs, and two LEDs do light up for each > drive.... > > http://www.ipcdirect.net/servlet/Detail?no=75 > http://www.norco.net.cn/UpLoadFile/Datasheet/DS-600S-EN.pdf > > Is there any way to set and read the GPIO from userspace? > > I haven't tried v3 of the patch and I can't shut the system down ATM to > reboot with the debug parameter. please try -v3 and boot with debug in command line, then post bootlog. YH -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
