Re: Support for Marvel 6141 in ahci.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Brad Campbell wrote:
Christian P. Schmidt wrote:
Hi Alan,

Alan Cox wrote:
On Sat, 10 Jan 2009 12:31:20 +0300
"Christian P. Schmidt" <schmidt@xxxxxxxxx> wrote:

Hi all,

The Marvell 6141
08:00.0 SATA controller: Marvell Technology Group Ltd. 88SE614x SATA II PCI-E controller (rev 01)
08:00.0 0106: 11ab:6141 (rev 01)
seems to work with the ahci driver with the attached patch:

Try using the PATA port.

Sorry, can't do - the chip is on an ASUS M2N32 WS Professional mainboard where the PATA is only on the MCP55.

How is that working for you? I did the same style of patch back in 2.6.26 (on the same board) and found it died _hard_ when writing to more than one port at a time. It worked with only one drive attached though, although I could not get hot plugging to work either.

Yes... that is why the ID is not in there at present :/

	Jeff




--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux