libata: make parallel port scan a per-host opt-in feature

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>From 17f458c7d9d7a25a04d448aef22b134135857018 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
Date: Fri, 9 Jan 2009 15:54:07 -0800
Subject: [PATCH] libata: Add a per-host flag to opt-in into parallel port probes

This patch adds a per host flag that allows drivers to opt in into
having its busses scanned in parallel.

Drivers that do not set this flag get their ports scanned in
the "original" sequence.

Signed-off-by: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
---
 drivers/ata/ahci.c        |    3 +++
 drivers/ata/libata-core.c |    9 +++++++++
 include/linux/libata.h    |    1 +
 3 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 7f701cb..1fc2d4b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2660,6 +2660,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	host->iomap = pcim_iomap_table(pdev);
 	host->private_data = hpriv;
 
+	if (!hpriv->cap & HOST_CAP_SSS)
+		host->flags |= ATA_HOST_PARALLEL_SCAN;
+
 	if (pi.flags & ATA_FLAG_EM)
 		ahci_reset_em(host);
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c507a9a..31c0f22 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5920,6 +5920,15 @@ static void async_port_probe(void *data, async_cookie_t cookie)
 {
 	int rc;
 	struct ata_port *ap = data;
+
+	/*
+	 * If we're not allowed to scan this host in parallel,
+	 * we need to wait until all previous scans have completed
+	 * before going further.
+	 */
+	if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN))
+		async_synchronize_cookie(cookie);
+	
 	/* probe */
 	if (ap->ops->error_handler) {
 		struct ata_eh_info *ehi = &ap->link.eh_info;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 4f7c8fb..b6b8a7f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -239,6 +239,7 @@ enum {
 	/* host set flags */
 	ATA_HOST_SIMPLEX	= (1 << 0),	/* Host is simplex, one DMA channel per host only */
 	ATA_HOST_STARTED	= (1 << 1),	/* Host started */
+	ATA_HOST_PARALLEL_SCAN	= (1 << 2),	/* Ports on this host can be scanned in parallel */
 
 	/* bits 24:31 of host->flags are reserved for LLD specific flags */
 
-- 
1.6.0.6


-- 
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux