Tejun Heo wrote:
pata_hpt366 had its clock detection wrong and detected 25Mhz as 40Mhz
and vice-versa. Fix it.
Signed-off-by: Tejun Heo <tj@xxxxxxxxxx>
---
drivers/ata/pata_hpt366.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Index: work/drivers/ata/pata_hpt366.c
===================================================================
--- work.orig/drivers/ata/pata_hpt366.c
+++ work/drivers/ata/pata_hpt366.c
@@ -382,10 +382,10 @@ static int hpt36x_init_one(struct pci_de
/* PCI clocking determines the ATA timing values to use */
/* info_hpt366 is safe against re-entry so we can scribble on it */
switch((reg1 & 0x700) >> 8) {
- case 5:
+ case 9:
hpriv = &hpt366_40;
break;
- case 9:
+ case 5:
hpriv = &hpt366_25;
applied #upstream-fixes
Avoiding patch #2 in this series b/c the thread seemed to indicate it
needed more work
Avoiding patch #3 in this series awaiting Alan's ack (did I miss it?)
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
