Jeff Garzik wrote:
gshan wrote:
Hello, I sent mails on this issue before, but nobody made response.
There are 2 types of board for me. The hardware configuration for
those 2 boards are almost same except that one of them has 100GB
harddisk, and another type of board has 60GB harddisk. All harddisk
was access through PIIX4. I found this issue on board with 60GB
disk, but can't reproduce it on that with 100GB disk.
When I uncompressed a large file (600MB) to a logic partition with 8GB
size, following errors was report on middle way (5 minutes about from
start).
Anybody has ideas?
hdc: dma_timer_expiry: dma status == 0x21
hdc: DMA timeout error
hdc: dma timeout error: status=0x58 { DriveReady SeekComplete
DataRequest }
ide: failed opcode was: unknown
hdc: DMA disabled
ide1: reset: success
Can you try disabling the IDE driver (CONFIG_IDE) and enabling the
newer libata driver? (CONFIG_ATA)
Jeff, thanks a lot for your suggestions. I will try it if possible.
Jeff
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
