eric wrote:
To whom it may concern:
We have the HighPoint 1740 SATAII RAID card. I had to modify the sata_mv.c
(attached) to get it to work with my card. The interesting bits are as
follows:
/* RocketRAID 1740/174x have different identifiers */
/* { PCI_VDEVICE(TTI, 0x1740), chip_508x }, */
/* Pozicom: GenII 1740 cards use 88sx6042 chip */
{ PCI_VDEVICE(TTI, 0x1740), chip_6042 },
{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
It appears the same card has different chip set depending upon when you
purchased your card. Looking through the code, the GenI vs. GenII vs.
GenIIe is done after the call to mv_pci_init_one thus passing a table of
values that are incorrect. It would appear to make sense to solve this by
creating two or more tables and make mv_pci_tbl a pci_device_id global * and
reference it accordingly after the Rev. level was determined.
..
Hi,
We (I) really need to see the output of "lspci -xxx" from that system.
Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
