[PATCH 3/3] ide: idedisk_supports_lba48() -> ata_id_lba48_enabled()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Add ata_id_lba48_enabled() inline helper to <linux/ata.h>.

* idedisk_supports_lba48() -> ata_id_lba48_enabled()

  The latter one also checks validity of words 83 & 86.

Cc: Jeff Garzik <jgarzik@xxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
 drivers/ide/ide-disk.c |   21 ++++++---------------
 include/linux/ata.h    |    9 +++++++++
 2 files changed, 15 insertions(+), 15 deletions(-)

Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -377,16 +377,6 @@ static unsigned long long sectors_to_MB(
 }
 
 /*
- * The same here.
- */
-static inline int idedisk_supports_lba48(const u16 *id)
-{
-	return (id[ATA_ID_COMMAND_SET_2] & 0x0400) &&
-	       (id[ATA_ID_CFS_ENABLE_2] & 0x0400) &&
-	       ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
-}
-
-/*
  * Some disks report total number of sectors instead of
  * maximum sector address.  We list them here.
  */
@@ -400,7 +390,7 @@ static const struct drive_list_entry hpa
 static void idedisk_check_hpa(ide_drive_t *drive)
 {
 	unsigned long long capacity, set_max;
-	int lba48 = idedisk_supports_lba48(drive->id);
+	int lba48 = ata_id_lba48_enabled(drive->id);
 
 	capacity = drive->capacity64;
 
@@ -457,7 +447,7 @@ static void init_idedisk_capacity(ide_dr
 	 */
 	int hpa = ata_id_hpa_enabled(id);
 
-	if (idedisk_supports_lba48(id)) {
+	if (ata_id_lba48_enabled(id)) {
 		/* drive speaks 48-bit LBA */
 		drive->select.b.lba = 1;
 		drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
@@ -761,9 +751,11 @@ static int set_lba_addressing(ide_drive_
 	if (drive->hwif->host_flags & IDE_HFLAG_NO_LBA48)
 		return 0;
 
-	if (!idedisk_supports_lba48(drive->id))
+	if (ata_id_lba48_enabled(drive->id) == 0)
 		return -EIO;
+
 	drive->addressing = arg;
+
 	return 0;
 }
 
@@ -860,8 +852,7 @@ static void idedisk_setup(ide_drive_t *d
 	capacity = idedisk_capacity(drive);
 
 	if (!drive->forced_geom) {
-
-		if (idedisk_supports_lba48(drive->id)) {
+		if (ata_id_lba48_enabled(drive->id)) {
 			/* compatibility */
 			drive->bios_sect = 63;
 			drive->bios_head = 255;
Index: b/include/linux/ata.h
===================================================================
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -573,6 +573,15 @@ static inline int ata_id_has_lba48(const
 	return id[ATA_ID_COMMAND_SET_2] & (1 << 10);
 }
 
+static inline int ata_id_lba48_enabled(const u16 *id)
+{
+	if (ata_id_has_lba48(id) == 0)
+		return 0;
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
+		return 0;
+	return id[ATA_ID_CFS_ENABLE_2] & (1 << 10);
+}
+
 static inline int ata_id_hpa_enabled(const u16 *id)
 {
 	/* Yes children, word 83 valid bits cover word 82 data */
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux