[PATCH 2/3] ide: preparations for /proc/ide/hd*/settings rework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



After rework settings will be no longer created dynamically
for each device so we need to make some fixups first.

* Use set_[ksettings,unmaskirq]() as a set function for
  ["keepsettings","unmaskirq"] setting.

* Allow writes to ["io_32bit","unmaskirq"] settings also when
  drive->no_[io_32bit,unmask] is set (this is checked later inside
  set_[io_32bit,unmaskirq]() anywyay and keeps consistency with
  the corresponding HDIO_SET_[32BIT,UNMASKINTR] ioctls).

* Use max possible multi sectors value (16) as an allowed max for
  "multcount" setting.  set_multcount() set function checks against
  device's max possbile value anyway and it makes the proc setting
  consistent with the corresponding HDIO_SET_MULTCOUNT ioctl.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
 drivers/ide/ide-disk.c |    3 +--
 drivers/ide/ide-proc.c |    6 +++---
 drivers/ide/ide.c      |    4 ++--
 include/linux/ide.h    |    2 ++
 4 files changed, 8 insertions(+), 7 deletions(-)

Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -767,8 +767,7 @@ static void idedisk_add_settings(ide_dri
 			&drive->bios_sect, NULL);
 	ide_add_setting(drive, "address", SETTING_RW, TYPE_BYTE, 0, 2, 1, 1,
 			&drive->addressing, set_lba_addressing);
-	ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0,
-			drive->id[ATA_ID_MAX_MULTSECT] & 0xff, 1, 1,
+	ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0, 16, 1, 1,
 			&drive->mult_count, set_multcount);
 	ide_add_setting(drive, "nowerr", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1,
 			&drive->nowerr, set_nowerr);
Index: b/drivers/ide/ide-proc.c
===================================================================
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -368,11 +368,11 @@ void ide_add_generic_settings (ide_drive
 /*
  *			  drive		setting name		read/write access				data type	min	max				mul_factor	div_factor	data pointer			set function
  */
-	__ide_add_setting(drive,	"io_32bit",		drive->no_io_32bit ? SETTING_READ : SETTING_RW,	TYPE_BYTE,	0,	1 + (SUPPORT_VLB_SYNC << 1),	1,		1,		&drive->io_32bit,		set_io_32bit,	0);
-	__ide_add_setting(drive,	"keepsettings",		SETTING_RW,					TYPE_BYTE,	0,	1,				1,		1,		&drive->keep_settings,		NULL,		0);
+	__ide_add_setting(drive,	"io_32bit",		SETTING_RW,					TYPE_BYTE,	0,	1 + (SUPPORT_VLB_SYNC << 1),	1,		1,		&drive->io_32bit,		set_io_32bit,	0);
+	__ide_add_setting(drive,	"keepsettings",		SETTING_RW,					TYPE_BYTE,	0,	1,				1,		1,		&drive->keep_settings,		set_ksettings,	0);
 	__ide_add_setting(drive,	"nice1",		SETTING_RW,					TYPE_BYTE,	0,	1,				1,		1,		&drive->nice1,			NULL,		0);
 	__ide_add_setting(drive,	"pio_mode",		SETTING_WRITE,					TYPE_BYTE,	0,	255,				1,		1,		NULL,				set_pio_mode,	0);
-	__ide_add_setting(drive,	"unmaskirq",		drive->no_unmask ? SETTING_READ : SETTING_RW,	TYPE_BYTE,	0,	1,				1,		1,		&drive->unmask,			NULL,		0);
+	__ide_add_setting(drive,	"unmaskirq",		SETTING_RW,					TYPE_BYTE,	0,	1,				1,		1,		&drive->unmask,			set_unmaskirq,	0);
 	__ide_add_setting(drive,	"using_dma",		SETTING_RW,					TYPE_BYTE,	0,	1,				1,		1,		&drive->using_dma,		set_using_dma,	0);
 	__ide_add_setting(drive,	"init_speed",		SETTING_RW,					TYPE_BYTE,	0,	70,				1,		1,		&drive->init_speed,		NULL,		0);
 	__ide_add_setting(drive,	"current_speed",	SETTING_RW,					TYPE_BYTE,	0,	70,				1,		1,		&drive->current_speed,		set_xfer_rate,	0);
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -305,7 +305,7 @@ int set_io_32bit(ide_drive_t *drive, int
 	return 0;
 }
 
-static int set_ksettings(ide_drive_t *drive, int arg)
+int set_ksettings(ide_drive_t *drive, int arg)
 {
 	if (arg < 0 || arg > 1)
 		return -EINVAL;
@@ -394,7 +394,7 @@ int set_pio_mode(ide_drive_t *drive, int
 	return 0;
 }
 
-static int set_unmaskirq(ide_drive_t *drive, int arg)
+int set_unmaskirq(ide_drive_t *drive, int arg)
 {
 	if (drive->no_unmask)
 		return -EPERM;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -697,7 +697,9 @@ typedef struct ide_driver_s ide_driver_t
 extern struct mutex ide_setting_mtx;
 
 int set_io_32bit(ide_drive_t *, int);
+int set_ksettings(ide_drive_t *, int);
 int set_pio_mode(ide_drive_t *, int);
+int set_unmaskirq(ide_drive_t *, int);
 int set_using_dma(ide_drive_t *, int);
 
 /* ATAPI packet command flags */
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux