This change is temporary and after unification of the IDE subsystem proper
bit setting and testing macros will be introduced.
Signed-off-by: Borislav Petkov <bbpetkov@xxxxxxxx>
---
drivers/ide/ide-floppy.c | 82 +++++++++++++++++++++++++---------------------
1 files changed, 45 insertions(+), 37 deletions(-)
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 4106eb4..29c1983 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -479,12 +479,12 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
debug_log("Reached %s interrupt handler\n", __FUNCTION__);
- if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+ if ((1UL << PC_DMA_IN_PROGRESS) & pc->flags) {
dma_error = HWIF(drive)->ide_dma_end(drive);
if (dma_error) {
printk(KERN_ERR "%s: DMA %s error\n", drive->name,
write ? "write" : "read");
- set_bit(PC_DMA_ERROR, &pc->flags);
+ pc->flags |= (1UL << PC_DMA_ERROR);
} else {
pc->actually_transferred = pc->request_transfer;
idefloppy_update_buffers(drive, pc);
@@ -499,11 +499,11 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
/* No more interrupts */
debug_log("Packet command completed, %d bytes transferred\n",
pc->actually_transferred);
- clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+ pc->flags &= ((1UL << PC_DMA_IN_PROGRESS) ^ ~0UL);
local_irq_enable_in_hardirq();
- if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
+ if ((stat & ERR_STAT) || ((1UL << PC_DMA_ERROR) & pc->flags)) {
/* Error detected */
debug_log("I/O error\n", drive->name);
rq->errors++;
@@ -525,7 +525,8 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
return ide_stopped;
}
- if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+ if ((1UL << PC_DMA_IN_PROGRESS) & pc->flags) {
+ pc->flags &= ((1UL << PC_DMA_IN_PROGRESS) ^ ~0UL);
printk(KERN_ERR "ide-floppy: The floppy wants to issue "
"more interrupts in DMA mode\n");
ide_dma_off(drive);
@@ -704,13 +705,13 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
floppy->pc = pc;
if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES ||
- test_bit(PC_ABORT, &pc->flags)) {
+ ((1UL << PC_ABORT) & pc->flags)) {
/*
* We will "abort" retrying a packet command in case
* a legitimate error code was received.
*/
- if (!test_bit(PC_ABORT, &pc->flags)) {
- if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags))
+ if (!((1UL << PC_ABORT) & pc->flags)) {
+ if (!((1UL << PC_SUPPRESS_ERROR) & pc->flags))
idefloppy_report_error(floppy, pc);
/* Giving up */
pc->error = IDEFLOPPY_ERROR_GENERAL;
@@ -728,12 +729,14 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->current_position = pc->buffer;
bcount = min(pc->request_transfer, 63 * 1024);
- if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags))
+ if ((1UL << PC_DMA_ERROR) & pc->flags) {
+ pc->flags &= ((1UL << PC_DMA_ERROR) ^ ~0UL);
ide_dma_off(drive);
+ }
dma = 0;
- if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
+ if (((1UL << PC_DMA_RECOMMENDED) & pc->flags) && drive->using_dma)
dma = !hwif->dma_setup(drive);
ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
@@ -741,12 +744,12 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
if (dma) {
/* Begin DMA, if necessary */
- set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+ pc->flags |= 1UL << PC_DMA_IN_PROGRESS;
hwif->dma_start(drive);
}
/* Can we transfer the packet when we get the interrupt or wait? */
- if (test_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags)) {
+ if ((1UL << IDEFLOPPY_ZIP_DRIVE) & floppy->flags) {
/* wait */
pkt_xfer_routine = &idefloppy_transfer_pc1;
} else {
@@ -754,7 +757,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pkt_xfer_routine = &idefloppy_transfer_pc;
}
- if (test_bit(IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags)) {
+ if ((1UL << IDEFLOPPY_DRQ_INTERRUPT) & floppy->flags) {
/* Issue the packet command */
ide_execute_command(drive, WIN_PACKETCMD,
pkt_xfer_routine,
@@ -812,7 +815,7 @@ static void idefloppy_create_format_unit_cmd(idefloppy_pc_t *pc, int b, int l,
put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4]));
put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8]));
pc->buffer_size = 12;
- set_bit(PC_WRITING, &pc->flags);
+ pc->flags |= 1 << PC_WRITING;
}
/* A mode sense command is used to "sense" floppy parameters. */
@@ -862,11 +865,11 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
int cmd = rq_data_dir(rq);
debug_log("create_rw1%d_cmd: block == %d, blocks == %d\n",
- 2 * test_bit(IDEFLOPPY_USE_READ12, &floppy->flags),
+ 2 * ((1UL << IDEFLOPPY_USE_READ12) & floppy->flags),
block, blocks);
idefloppy_init_pc(pc);
- if (test_bit(IDEFLOPPY_USE_READ12, &floppy->flags)) {
+ if ((1UL << IDEFLOPPY_USE_READ12) & floppy->flags) {
pc->c[0] = cmd == READ ? GPCMD_READ_12 : GPCMD_WRITE_12;
put_unaligned(cpu_to_be32(blocks), (unsigned int *) &pc->c[6]);
} else {
@@ -878,10 +881,10 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
pc->rq = rq;
pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
if (rq->cmd_flags & REQ_RW)
- set_bit(PC_WRITING, &pc->flags);
+ pc->flags |= 1UL << PC_WRITING;
pc->buffer = NULL;
pc->request_transfer = pc->buffer_size = blocks * floppy->block_size;
- set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+ pc->flags |= 1UL << PC_DMA_RECOMMENDED;
}
static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
@@ -893,10 +896,10 @@ static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
pc->rq = rq;
pc->b_count = rq->data_len;
if (rq->data_len && rq_data_dir(rq) == WRITE)
- set_bit(PC_WRITING, &pc->flags);
+ pc->flags |= 1UL << PC_WRITING;
pc->buffer = rq->data;
if (rq->bio)
- set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+ pc->flags |= 1UL << PC_DMA_RECOMMENDED;
/*
* possibly problematic, doesn't look like ide-floppy correctly handled
@@ -1035,7 +1038,7 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE,
MODE_SENSE_CURRENT);
- set_bit(PC_SUPPRESS_ERROR, &pc.flags);
+ pc.flags |= 1UL << PC_SUPPRESS_ERROR;
if (idefloppy_queue_pc_tail(drive, &pc))
return 1;
@@ -1078,7 +1081,7 @@ static int idefloppy_get_capacity(ide_drive_t *drive)
switch (pc.buffer[desc_start + 4] & 0x03) {
/* Clik! drive returns this instead of CAPACITY_CURRENT */
case CAPACITY_UNFORMATTED:
- if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags))
+ if (!((1UL << IDEFLOPPY_CLIK_DRIVE) & floppy->flags))
/*
* If it is not a clik drive, break out
* (maintains previous driver behaviour)
@@ -1126,7 +1129,7 @@ static int idefloppy_get_capacity(ide_drive_t *drive)
}
/* Clik! disk does not support get_flexible_disk_page */
- if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags))
+ if (!((1UL << IDEFLOPPY_CLIK_DRIVE) & floppy->flags))
(void) idefloppy_get_flexible_disk_page(drive);
set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor);
@@ -1356,7 +1359,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
*((u16 *) &gcw) = drive->id->config;
floppy->pc = floppy->pc_stack;
if (gcw.drq_type == 1)
- set_bit(IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags);
+ floppy->flags |= 1UL << IDEFLOPPY_DRQ_INTERRUPT;
/*
* We used to check revisions here. At this point however I'm giving up.
@@ -1369,7 +1372,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
*/
if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) {
- set_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags);
+ floppy->flags |= 1UL << IDEFLOPPY_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
floppy->ticks = IDEFLOPPY_TICKS_DELAY;
blk_queue_max_sectors(drive->queue, 64);
@@ -1381,7 +1384,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
*/
if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) {
blk_queue_max_sectors(drive->queue, 64);
- set_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags);
+ floppy->flags |= 1UL << IDEFLOPPY_CLIK_DRIVE;
}
(void) idefloppy_get_capacity(drive);
@@ -1471,7 +1474,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
floppy->openers++;
if (floppy->openers == 1) {
- clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+ floppy->flags &= (1UL << IDEFLOPPY_FORMAT_IN_PROGRESS) ^ ~0UL;
/* Just in case */
idefloppy_create_test_unit_ready_cmd(&pc);
@@ -1496,14 +1499,14 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
ret = -EROFS;
goto out_put_floppy;
}
- set_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags);
+ floppy->flags |= 1UL << IDEFLOPPY_MEDIA_CHANGED;
/* IOMEGA Clik! drives do not support lock/unlock commands */
- if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
+ if (!((1UL << IDEFLOPPY_CLIK_DRIVE) & floppy->flags)) {
idefloppy_create_prevent_cmd(&pc, 1);
(void) idefloppy_queue_pc_tail(drive, &pc);
}
check_disk_change(inode->i_bdev);
- } else if (test_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags)) {
+ } else if ((1UL << IDEFLOPPY_FORMAT_IN_PROGRESS) & floppy->flags) {
ret = -EBUSY;
goto out_put_floppy;
}
@@ -1526,12 +1529,12 @@ static int idefloppy_release(struct inode *inode, struct file *filp)
if (floppy->openers == 1) {
/* IOMEGA Clik! drives do not support lock/unlock commands */
- if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
+ if (!((1UL << IDEFLOPPY_CLIK_DRIVE) & floppy->flags)) {
idefloppy_create_prevent_cmd(&pc, 0);
(void) idefloppy_queue_pc_tail(drive, &pc);
}
- clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+ floppy->flags &= (1UL << IDEFLOPPY_FORMAT_IN_PROGRESS) ^ ~0UL;
}
floppy->openers--;
@@ -1560,7 +1563,7 @@ static int idefloppy_lockdoor(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc,
/* The IOMEGA Clik! Drive doesn't support this command -
* no room for an eject mechanism */
- if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
+ if (!((1UL << IDEFLOPPY_CLIK_DRIVE) & floppy->flags)) {
int prevent = (arg) ? 1 : 0;
if (cmd == CDROMEJECT)
@@ -1586,11 +1589,11 @@ static int idefloppy_format_unit(idefloppy_floppy_t *floppy, unsigned long arg)
if (floppy->openers > 1) {
/* Don't format if someone is using the disk */
- clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+ floppy->flags &= (1UL << IDEFLOPPY_FORMAT_IN_PROGRESS) ^ ~0UL;
return -EBUSY;
}
- set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+ floppy->flags |= 1UL << IDEFLOPPY_FORMAT_IN_PROGRESS;
/*
* Send ATAPI_FORMAT_UNIT to the drive.
@@ -1624,7 +1627,7 @@ static int idefloppy_format_unit(idefloppy_floppy_t *floppy, unsigned long arg)
out:
if (err)
- clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
+ floppy->flags &= (1UL << IDEFLOPPY_FORMAT_IN_PROGRESS) ^ ~0UL;
return err;
}
@@ -1661,13 +1664,18 @@ static int idefloppy_media_changed(struct gendisk *disk)
{
struct ide_floppy_obj *floppy = ide_floppy_g(disk);
ide_drive_t *drive = floppy->drive;
+ int ret;
/* do not scan partitions twice if this is a removable device */
if (drive->attach) {
drive->attach = 0;
return 0;
}
- return test_and_clear_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags);
+ /* test_and_clear_bit */
+ ret = (1UL << IDEFLOPPY_MEDIA_CHANGED) & floppy->flags;
+ floppy->flags &= (1UL << IDEFLOPPY_MEDIA_CHANGED) ^ ~0UL;
+
+ return ret;
}
static int idefloppy_revalidate_disk(struct gendisk *disk)
--
1.5.3.7
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
