Re: sata_nv does not function in kernel > 2.6.20.21

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Matthew Hall wrote:
ACPI: PCI Interrupt Link [LT3D] enabled at IRQ 46
ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LT3D] -> GSI 46 (level,
low) -> IRQ 46
sata_nv 0000:80:07.0: Using ADMA mode
PCI: Unable to reserve mem region #6:1000@dfefe000 for device
0000:80:07.0
ACPI: PCI interrupt for device 0000:80:07.0 disabled
sata_nv: probe of 0000:80:07.0 failed with error -16
ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 45
ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LT2E] -> GSI 45 (level,
low) -> IRQ 45
sata_nv 0000:80:08.0: Using ADMA mode
PCI: Unable to reserve mem region #6:1000@dfefd000 for device
0000:80:08.0
ACPI: PCI interrupt for device 0000:80:08.0 disabled
sata_nv: probe of 0000:80:08.0 failed with error -16

Error -16 is EBUSY, which causes the driver load to fail due to the "Unable to reserve mem region" message.

This means that the sata_nv driver needed to use PCI BAR 6, but was unable to for some reason. Given that sata_nv uses devres like other libata drivers, IMO the likely cause is outside the ATA subsystem (PCI? ACPI?).

One workaround to try is setting sata_nv module option 'adma' to zero (0), in the hopes that it ignores that final region and work anyway.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux