Re: Sata 4726 Testing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

Andrew Ryder wrote:
> Yes the issue is still there. I have also tried it with 2.6.24-rc6-git4.
> 
> BootLog1.txt
> 2.6.24-rc6-git4: machine booting up, drive array on before machine is
> powered on, drive array is configured as one large disk (RAID-1).
> 
> Bootlog2.txt
> Same kernel as #1, system has been up for a day or two, drive array was
> turned off after the boot failure in #1 and I turned it on again to see
> if it made any difference.
> 
> Bootlog3.txt
> Booted system, drive array already on, kernel 2.6.24-rc6 and the drive
> array was configured as one large disk (RAID-1).
> 
> Bootlog4.txt
> Same as #3, but drive array was configured in JBOD mode.
> 
> If you have any not too dangerous fixes you want to test, let me know. I
> can give them a try on my hardware here.

Hmmmm... This is weird.  I have two reports on addonics reporting the
same problem now.

In boot log 1 and 3, the first fan-out port (ata1.00) is down while on 2
and 4, the link is up.  Was there any hardware configuration change?
4726 is known to malfunction if the first port isn't occupied.

Thanks.

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux