VMware ich4 emulation incorrectly sets DMA_ERR on TF error. Ignore
it.
Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
---
drivers/ata/ata_piix.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index bb62a58..b406b39 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -132,6 +132,7 @@ enum {
ich8_2port_sata,
ich8m_apple_sata_ahci, /* locks up on second port enable */
tolapai_sata_ahci,
+ piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
/* constants for mapping table */
P0 = 0, /* port 0 */
@@ -165,6 +166,7 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static int ich_pata_cable_detect(struct ata_port *ap);
+static u8 piix_vmw_bmdma_status(struct ata_port *ap);
#ifdef CONFIG_PM
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int piix_pci_device_resume(struct pci_dev *pdev);
@@ -175,6 +177,8 @@ static unsigned int in_module_init = 1;
static const struct pci_device_id piix_pci_tbl[] = {
/* Intel PIIX3 for the 430HX etc */
{ 0x8086, 0x7010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_mwdma },
+ /* VMware ICH4 */
+ { 0x8086, 0x7111, 0x15ad, 0x1976, 0, 0, piix_pata_vmw },
/* Intel PIIX4 for the 430TX/440BX/MX chipset: UDMA 33 */
/* Also PIIX4E (fn3 rev 2) and PIIX4M (fn3 rev 3) */
{ 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix_pata_33 },
@@ -383,6 +387,38 @@ static const struct ata_port_operations piix_sata_ops = {
.port_start = ata_port_start,
};
+static const struct ata_port_operations piix_vmw_ops = {
+ .set_piomode = piix_set_piomode,
+ .set_dmamode = piix_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = piix_vmw_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_data_xfer,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = piix_pata_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_port_start,
+};
+
static const struct piix_map_db ich5_map_db = {
.mask = 0x7,
.port_enable = 0x3,
@@ -623,6 +659,16 @@ static struct ata_port_info piix_port_info[] = {
.port_ops = &piix_sata_ops,
},
+ [piix_pata_vmw] =
+ {
+ .sht = &piix_sht,
+ .flags = PIIX_PATA_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
+ .udma_mask = ATA_UDMA_MASK_40C,
+ .port_ops = &piix_vmw_ops,
+ },
+
};
static struct pci_bits piix_enable_bits[] = {
@@ -1135,6 +1181,11 @@ static int piix_pci_device_resume(struct pci_dev *pdev)
}
#endif
+static u8 piix_vmw_bmdma_status(struct ata_port *ap)
+{
+ return ata_bmdma_status(ap) & ~ATA_DMA_ERR;
+}
+
#define AHCI_PCI_BAR 5
#define AHCI_GLOBAL_CTL 0x04
#define AHCI_ENABLE (1 << 31)
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
