Holger Hoffstaette wrote:
Another new "problem" (not as important) -- even though SATA disks are
called with "sdX", my ATA disks that *were* at hda-hdc are now at hde-hdg.
Devices hda-hdd are not populated in my dev directory on bootup. Of
I think this is because the Promise SATA card also has one or more PATA
channels, so if the card is activated it takes precedence over your old
controller. But it should only be one channel, not four?
As for the other problem - I plan on adding such a card to one of my
systems during the week and might be able to contribute some findings.
---
FYI - this specific card was sold as "4-SATA" channels. There were
other contemporary (same package design) Promise cards offered that
were advertised to 1) support 2-sata+2pata or 2) support RAID w/SATA.
I think there was also a RAID card supporting PATA-only as well.
It is quite possible (though thoroughly 'lame'), that they have 1
card providing, both 4 SATA and 4 PATA, but only provide the connectors
for some subset, with the RAID being a firmware-only (software-only)
option that is implemented in software on the card (as my web searching
indicated was true for some Promise SATA cards).
Perhaps an "RFE" for hdparm might be someway to specify the
target device by using a label on one of the devices partitions, since
my boot-time hdparm settings suffer from the same problems my
/etc/fstab used to suffer before "labels" were available.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
