Re: pata_via refuses to detect one drive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Alan Cox a écrit :
This looks like both drives end up trying to be the slave ? Its certainly
very vey confused at this point. Interesting it works with the BIOS doing
the reset, wonder what the difference is.
Not only it works with BIOS, it also works with via82cxxx just fine.

The via82cxxx driver doesn't go off and reset everything unless it gets
bad error cases.
How are the drives jumpered and does it work with just one of the two
present ?
That's an interesting question.  The machine is remote, and there's
no one on site who's able to check it.  I'll try to get reach of it,
hopefully it will be soon enough.  In any case, it looks like the
jumpers are OK, or else it shouldnt work with IDE module as well.

Maybe. But its useful to know and it helps narrow down the fault. I've no
idea whether the problem is hardware or software. What I am sure of
though is if the BIOS and old driver work we should be able to make the
new one work. My first guess is still a driver bug, and second some kind
of probing interaction. BIOSen usually use Hal's code so we've got a fair
idea of what the BIOS will do.

Alan
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

I've got the same problem and I really don't know what to do
here is my dmesg :

SCSI subsystem initialized
usb 1-2: new low speed USB device using uhci_hcd and address 2
libata version 2.21 loaded.
pata_via 0000:00:11.1: version 0.3.1
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff00 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15
usb 1-2: configuration #1 chosen from 1 choice
input: Logitech Inc. iFeel Mouse    as /class/input/input2
input: USB HID v1.00 Mouse [Logitech Inc. iFeel Mouse ] on usb-0000:00:11.2-2
ata1.00: ATA-7: Maxtor 6Y160P0, YAR41BW0, max UDMA/133
ata1.00: 320173056 sectors, multi 16: LBA48
ata1.01: ATA-4: IBM-DJNA-351520, J56OA30K, max UDMA/33
ata1.01: 30033360 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
usb 2-2: new full speed USB device using uhci_hcd and address 2
ata2.00: ATAPI: SONY    DVD RW DW-U18A, UYS1, max UDMA/33
usb 2-2: configuration #1 chosen from 1 choice
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y160P0   YAR4 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 0:0:1:0: Direct-Access     ATA      IBM-DJNA-351520  J56O PQ: 0 ANSI: 5
sd 0:0:1:0: [sdb] 30033360 512-byte hardware sectors (15377 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 30033360 512-byte hardware sectors (15377 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 0:0:1:0: [sdb] Attached SCSI disk
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
         res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
         res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
         res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
         res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x2 (HSM violation)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1192825830.852:2): selinux=0 auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0

-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux