This patch adds support for Freescale 3.0Gbps SATA Controller supporting Native Command Queueing(NCQ), device hotplug, and ATAPI. This controller can be found on MPC8315 and MPC8378. Signed-off-by: Ashish Kalra <ashish.kalra@xxxxxxxxxxxxx> Signed-off-by: Li Yang <leoli@xxxxxxxxxxxxx> --- Address comments from Arnd Bergmann. drivers/ata/Kconfig | 9 + drivers/ata/Makefile | 1 + drivers/ata/sata_fsl.c | 1490 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1500 insertions(+), 0 deletions(-) create mode 100644 drivers/ata/sata_fsl.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index d8046a1..ab9f3dc 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -173,6 +173,15 @@ config SATA_INIC162X help This option enables support for Initio 162x Serial ATA. +config SATA_FSL + tristate "Freescale 3.0Gbps SATA support" + depends on PPC_MPC837x + help + This option enables support for Freescale 3.0Gbps SATA controller. + It can be found on MPC837x and MPC8315. + + If unsure, say N. + config PATA_ALI tristate "ALi PATA support (Experimental)" depends on PCI && EXPERIMENTAL diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 8149c68..2ca9b2e 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_SATA_ULI) += sata_uli.o obj-$(CONFIG_SATA_MV) += sata_mv.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_PDC_ADMA) += pdc_adma.o +obj-$(CONFIG_SATA_FSL) += sata_fsl.o obj-$(CONFIG_PATA_ALI) += pata_ali.o obj-$(CONFIG_PATA_AMD) += pata_amd.o diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c new file mode 100644 index 0000000..b4c37b9 --- /dev/null +++ b/drivers/ata/sata_fsl.c @@ -0,0 +1,1490 @@ +/* + * drivers/ata/sata_fsl.c + * + * Freescale 3.0Gbps SATA device driver + * + * Author: Ashish Kalra <ashish.kalra@xxxxxxxxxxxxx> + * Li Yang <leoli@xxxxxxxxxxxxx> + * + * Copyright (c) 2006-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <scsi/scsi_host.h> +#include <scsi/scsi_cmnd.h> +#include <linux/libata.h> +#include <asm/io.h> +#include <linux/of_platform.h> + +/* Controller information */ +enum { + SATA_FSL_QUEUE_DEPTH = 16, + SATA_FSL_MAX_PRD = 63, + SATA_FSL_MAX_PRD_USABLE = SATA_FSL_MAX_PRD - 1, + SATA_FSL_MAX_PRD_DIRECT = 16, /* Direct PRDT entries */ + + SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY), + + SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH, + SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */ + SATA_FSL_CMD_SLOT_SIZE = (SATA_FSL_MAX_CMDS * SATA_FSL_CMD_HDR_SIZE), + + /* + * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and + * chained indirect PRDEs upto a max count of 63. + * We are allocating an array of 63 PRDEs contigiously, but PRDE#15 will + * be setup as an indirect descriptor, pointing to it's next + * (contigious) PRDE. Though chained indirect PRDE arrays are + * supported,it will be more efficient to use a direct PRDT and + * a single chain/link to indirect PRDE array/PRDT. + */ + + SATA_FSL_CMD_DESC_CFIS_SZ = 32, + SATA_FSL_CMD_DESC_SFIS_SZ = 32, + SATA_FSL_CMD_DESC_ACMD_SZ = 16, + SATA_FSL_CMD_DESC_RSRVD = 16, + + SATA_FSL_CMD_DESC_SIZE = (SATA_FSL_CMD_DESC_CFIS_SZ + + SATA_FSL_CMD_DESC_SFIS_SZ + + SATA_FSL_CMD_DESC_ACMD_SZ + + SATA_FSL_CMD_DESC_RSRVD + + SATA_FSL_MAX_PRD * 16), + + SATA_FSL_CMD_DESC_OFFSET_TO_PRDT = + (SATA_FSL_CMD_DESC_CFIS_SZ + + SATA_FSL_CMD_DESC_SFIS_SZ + + SATA_FSL_CMD_DESC_ACMD_SZ + + SATA_FSL_CMD_DESC_RSRVD), + + SATA_FSL_CMD_DESC_AR_SZ = (SATA_FSL_CMD_DESC_SIZE * SATA_FSL_MAX_CMDS), + SATA_FSL_PORT_PRIV_DMA_SZ = (SATA_FSL_CMD_SLOT_SIZE + + SATA_FSL_CMD_DESC_AR_SZ), + + /* + * MPC8315 has two SATA controllers, SATA1 & SATA2 + * (one port per controller) + * MPC837x has 2/4 controllers, one port per controller + */ + + SATA_FSL_MAX_PORTS = 1, + + SATA_FSL_IRQ_FLAG = IRQF_SHARED, +}; + +/* +* Host Controller command register set - per port +*/ +enum { + CQ = 0, + CA = 8, + CC = 0x10, + CE = 0x18, + DE = 0x20, + CHBA = 0x24, + HSTATUS = 0x28, + HCONTROL = 0x2C, + CQPMP = 0x30, + SIGNATURE = 0x34, + ICC = 0x38, + + /* + * Host Status Register (HStatus) bitdefs + */ + ONLINE = (1 << 31), + GOING_OFFLINE = (1 << 30), + BIST_ERR = (1 << 29), + + FATAL_ERR_HC_MASTER_ERR = (1 << 18), + FATAL_ERR_PARITY_ERR_TX = (1 << 17), + FATAL_ERR_PARITY_ERR_RX = (1 << 16), + FATAL_ERR_DATA_UNDERRUN = (1 << 13), + FATAL_ERR_DATA_OVERRUN = (1 << 12), + FATAL_ERR_CRC_ERR_TX = (1 << 11), + FATAL_ERR_CRC_ERR_RX = (1 << 10), + FATAL_ERR_FIFO_OVRFL_TX = (1 << 9), + FATAL_ERR_FIFO_OVRFL_RX = (1 << 8), + + FATAL_ERROR_DECODE = FATAL_ERR_HC_MASTER_ERR | + FATAL_ERR_PARITY_ERR_TX | + FATAL_ERR_PARITY_ERR_RX | + FATAL_ERR_DATA_UNDERRUN | + FATAL_ERR_DATA_OVERRUN | + FATAL_ERR_CRC_ERR_TX | + FATAL_ERR_CRC_ERR_RX | + FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX, + + INT_ON_FATAL_ERR = (1 << 5), + INT_ON_PHYRDY_CHG = (1 << 4), + + INT_ON_SIGNATURE_UPDATE = (1 << 3), + INT_ON_SNOTIFY_UPDATE = (1 << 2), + INT_ON_SINGL_DEVICE_ERR = (1 << 1), + INT_ON_CMD_COMPLETE = 1, + + INT_ON_ERROR = INT_ON_FATAL_ERR | + INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR, + + /* + * Host Control Register (HControl) bitdefs + */ + HCONTROL_ONLINE_PHY_RST = (1 << 31), + HCONTROL_FORCE_OFFLINE = (1 << 30), + HCONTROL_PARITY_PROT_MOD = (1 << 14), + HCONTROL_DPATH_PARITY = (1 << 12), + HCONTROL_SNOOP_ENABLE = (1 << 10), + HCONTROL_PMP_ATTACHED = (1 << 9), + HCONTROL_COPYOUT_STATFIS = (1 << 8), + IE_ON_FATAL_ERR = (1 << 5), + IE_ON_PHYRDY_CHG = (1 << 4), + IE_ON_SIGNATURE_UPDATE = (1 << 3), + IE_ON_SNOTIFY_UPDATE = (1 << 2), + IE_ON_SINGL_DEVICE_ERR = (1 << 1), + IE_ON_CMD_COMPLETE = 1, + + DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG | + IE_ON_SIGNATURE_UPDATE | + IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE, + + EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31), + DATA_SNOOP_ENABLE = (1 << 22), +}; + +/* + * SATA Superset Registers + */ +enum { + SSTATUS = 0, + SERROR = 4, + SCONTROL = 8, + SNOTIFY = 0xC, +}; + +/* + * Control Status Register Set + */ +enum { + TRANSCFG = 0, + TRANSSTATUS = 4, + LINKCFG = 8, + LINKCFG1 = 0xC, + LINKCFG2 = 0x10, + LINKSTATUS = 0x14, + LINKSTATUS1 = 0x18, + PHYCTRLCFG = 0x1C, + COMMANDSTAT = 0x20, +}; + +/* PHY (link-layer) configuration control */ +enum { + PHY_BIST_ENABLE = 0x01, +}; + +/* + * Command Header Table entry, i.e, command slot + * 4 Dwords per command slot, command header size == 64 Dwords. + */ +struct cmdhdr_tbl_entry { + u32 cda; + u32 prde_fis_len; + u32 ttl; + u32 desc_info; +}; + +/* + * Description information bitdefs + */ +enum { + VENDOR_SPECIFIC_BIST = (1 << 10), + CMD_DESC_SNOOP_ENABLE = (1 << 9), + FPDMA_QUEUED_CMD = (1 << 8), + SRST_CMD = (1 << 7), + BIST = (1 << 6), + ATAPI_CMD = (1 << 5), +}; + +/* + * Command Descriptor + */ +struct command_desc { + u8 cfis[8 * 4]; + u8 sfis[8 * 4]; + u8 acmd[4 * 4]; + u8 fill[4 * 4]; + u32 prdt[SATA_FSL_MAX_PRD_DIRECT * 4]; + u32 prdt_indirect[(SATA_FSL_MAX_PRD - SATA_FSL_MAX_PRD_DIRECT) * 4]; +}; + +/* + * Physical region table descriptor(PRD) + */ + +struct prde { + u32 dba; + u8 fill[2 * 4]; + u32 ddc_and_ext; +}; + +/* + * ata_port private data + * This is our per-port instance data. + */ +struct sata_fsl_port_priv { + struct cmdhdr_tbl_entry *cmdslot; + dma_addr_t cmdslot_paddr; + struct command_desc *cmdentry; + dma_addr_t cmdentry_paddr; + + /* + * SATA FSL controller has a Status FIS which should contain the + * received D2H FIS & taskfile registers. This SFIS is present in + * the command descriptor, and to have a ready reference to it, + * we are caching it here, quite similar to what is done in H/W on + * AHCI compliant devices by copying taskfile fields to a 32-bit + * register. + */ + + struct ata_taskfile tf; +}; + +/* + * ata_port->host_set private data + */ +struct sata_fsl_host_priv { + void __iomem *hcr_base; + void __iomem *ssr_base; + void __iomem *csr_base; +}; + +static inline unsigned int sata_fsl_tag(unsigned int tag, + void __iomem * hcr_base) +{ + /* We let libATA core do actual (queue) tag allocation */ + + /* all non NCQ/queued commands should have tag#0 */ + if (ata_tag_internal(tag)) { + DPRINTK("mapping internal cmds to tag#0\n"); + return 0; + } + + if (unlikely(tag >= SATA_FSL_QUEUE_DEPTH)) { + DPRINTK("tag %d invalid : out of range\n", tag); + return 0; + } + + if (unlikely((ioread32(hcr_base + CQ)) & (1 << tag))) { + DPRINTK("tag %d invalid : in use!!\n", tag); + return 0; + } + + return tag; +} + +static void sata_fsl_setup_cmd_hdr_entry(struct sata_fsl_port_priv *pp, + unsigned int tag, u32 desc_info, + u32 data_xfer_len, u8 num_prde, + u8 fis_len) +{ + dma_addr_t cmd_descriptor_address; + + cmd_descriptor_address = pp->cmdentry_paddr + + tag * SATA_FSL_CMD_DESC_SIZE; + + /* NOTE: both data_xfer_len & fis_len are Dword counts */ + + pp->cmdslot[tag].cda = cpu_to_le32(cmd_descriptor_address); + pp->cmdslot[tag].prde_fis_len = + cpu_to_le32((num_prde << 16) | (fis_len << 2)); + pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03); + pp->cmdslot[tag].desc_info = cpu_to_le32((desc_info | (tag & 0x1F))); + + VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n", + pp->cmdslot[tag].cda, + pp->cmdslot[tag].prde_fis_len, + pp->cmdslot[tag].ttl, pp->cmdslot[tag].desc_info); + +} + +static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, + u32 * ttl, dma_addr_t cmd_desc_paddr) +{ + struct scatterlist *sg; + unsigned int num_prde = 0; + u32 ttl_dwords = 0; + + /* + * NOTE : direct & indirect prdt's are contigiously allocated + */ + struct prde *prd = (struct prde *)&((struct command_desc *) + cmd_desc)->prdt; + + struct prde *prd_ptr_to_indirect_ext = NULL; + unsigned indirect_ext_segment_sz = 0; + dma_addr_t indirect_ext_segment_paddr; + + VPRINTK("SATA FSL : cd = 0x%x, prd = 0x%x\n", cmd_desc, prd); + + indirect_ext_segment_paddr = cmd_desc_paddr + + SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16; + + ata_for_each_sg(sg, qc) { + dma_addr_t sg_addr = sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n", + sg_addr, sg_len); + + /* warn if each s/g element is not dword aligned */ + if (sg_addr & 0x03) + ata_port_printk(qc->ap, KERN_ERR, + "s/g addr unaligned : 0x%x\n", sg_addr); + if (sg_len & 0x03) + ata_port_printk(qc->ap, KERN_ERR, + "s/g len unaligned : 0x%x\n", sg_len); + + if ((num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1)) && + !ata_sg_is_last(sg, qc)) { + VPRINTK("setting indirect prde\n"); + prd_ptr_to_indirect_ext = prd; + prd->dba = cpu_to_le32(indirect_ext_segment_paddr); + indirect_ext_segment_sz = 0; + ++prd; + ++num_prde; + } + + ttl_dwords += sg_len; + prd->dba = cpu_to_le32(sg_addr); + prd->ddc_and_ext = + cpu_to_le32(DATA_SNOOP_ENABLE | (sg_len & ~0x03)); + + VPRINTK("sg_fill, ttl=%d, dba=0x%x, ddc=0x%x\n", + ttl_dwords, prd->dba, prd->ddc_and_ext); + + ++num_prde; + ++prd; + if (prd_ptr_to_indirect_ext) + indirect_ext_segment_sz += sg_len; + } + + if (prd_ptr_to_indirect_ext) { + /* set indirect extension flag along with indirect ext. size */ + prd_ptr_to_indirect_ext->ddc_and_ext = + cpu_to_le32((EXT_INDIRECT_SEG_PRD_FLAG | + DATA_SNOOP_ENABLE | + (indirect_ext_segment_sz & ~0x03))); + } + + *ttl = ttl_dwords; + return num_prde; +} + +static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sata_fsl_port_priv *pp = ap->private_data; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); + struct command_desc *cd; + u32 desc_info = CMD_DESC_SNOOP_ENABLE; + u32 num_prde = 0; + u32 ttl_dwords = 0; + dma_addr_t cd_paddr; + + cd = (struct command_desc *)pp->cmdentry + tag; + cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE; + + ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) & cd->cfis); + + VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n", + cd->cfis[0], cd->cfis[1], cd->cfis[2]); + + if (qc->tf.protocol == ATA_PROT_NCQ) { + VPRINTK("FPDMA xfer,Sctor cnt[0:7],[8:15] = %d,%d\n", + cd->cfis[3], cd->cfis[11]); + } + + /* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */ + if (is_atapi_taskfile(&qc->tf)) { + desc_info |= ATAPI_CMD; + memset((void *)&cd->acmd, 0, 32); + memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len); + } + + if (qc->flags & ATA_QCFLAG_DMAMAP) + num_prde = sata_fsl_fill_sg(qc, (void *)cd, + &ttl_dwords, cd_paddr); + + if (qc->tf.protocol == ATA_PROT_NCQ) + desc_info |= FPDMA_QUEUED_CMD; + + sata_fsl_setup_cmd_hdr_entry(pp, tag, desc_info, ttl_dwords, + num_prde, 5); + + VPRINTK("SATA FSL : xx_qc_prep, di = 0x%x, ttl = %d, num_prde = %d\n", + desc_info, ttl_dwords, num_prde); +} + +static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); + + VPRINTK("xx_qc_issue called,CQ=0x%x,CA=0x%x,CE=0x%x,CC=0x%x\n", + ioread32(CQ + hcr_base), + ioread32(CA + hcr_base), + ioread32(CE + hcr_base), ioread32(CC + hcr_base)); + + /* Simply queue command to the controller/device */ + iowrite32(1 << tag, CQ + hcr_base); + + VPRINTK("xx_qc_issue called, tag=%d, CQ=0x%x, CA=0x%x\n", + tag, ioread32(CQ + hcr_base), ioread32(CA + hcr_base)); + + VPRINTK("CE=0x%x, DE=0x%x, CC=0x%x, CmdStat = 0x%x\n", + ioread32(CE + hcr_base), + ioread32(DE + hcr_base), + ioread32(CC + hcr_base), ioread32(COMMANDSTAT + csr_base)); + + return 0; +} + +static int sata_fsl_scr_write(struct ata_port *ap, unsigned int sc_reg_in, + u32 val) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *ssr_base = host_priv->ssr_base; + unsigned int sc_reg; + + switch (sc_reg_in) { + case SCR_STATUS: + sc_reg = 0; + break; + case SCR_ERROR: + sc_reg = 1; + break; + case SCR_CONTROL: + sc_reg = 2; + break; + case SCR_ACTIVE: + sc_reg = 3; + break; + default: + return -EINVAL; + } + + VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg); + + iowrite32(val, (void __iomem *)ssr_base + (sc_reg * 4)); + return 0; +} + +static int sata_fsl_scr_read(struct ata_port *ap, unsigned int sc_reg_in, + u32 *val) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *ssr_base = host_priv->ssr_base; + unsigned int sc_reg; + + switch (sc_reg_in) { + case SCR_STATUS: + sc_reg = 0; + break; + case SCR_ERROR: + sc_reg = 1; + break; + case SCR_CONTROL: + sc_reg = 2; + break; + case SCR_ACTIVE: + sc_reg = 3; + break; + default: + return -EINVAL; + } + + VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg); + + *val = ioread32((void __iomem *)ssr_base + (sc_reg * 4)); + return 0; +} + +static void sata_fsl_freeze(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + VPRINTK("xx_freeze, CQ=0x%x, CA=0x%x, CE=0x%x, DE=0x%x\n", + ioread32(CQ + hcr_base), + ioread32(CA + hcr_base), + ioread32(CE + hcr_base), ioread32(DE + hcr_base)); + VPRINTK("CmdStat = 0x%x\n", ioread32(csr_base + COMMANDSTAT)); + + /* disable interrupts on the controller/port */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp & ~0x3F), hcr_base + HCONTROL); + + VPRINTK("in xx_freeze : HControl = 0x%x, HStatus = 0x%x\n", + ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS)); +} + +static void sata_fsl_thaw(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + /* ack. any pending IRQs for this controller/port */ + temp = ioread32(hcr_base + HSTATUS); + + VPRINTK("xx_thaw, pending IRQs = 0x%x\n", (temp & 0x3F)); + + if (temp & 0x3F) + iowrite32((temp & 0x3F), hcr_base + HSTATUS); + + /* enable interrupts on the controller/port */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL); + + VPRINTK("xx_thaw : HControl = 0x%x, HStatus = 0x%x\n", + ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS)); +} + +/* + * NOTE : 1st D2H FIS from device does not update sfis in command descriptor. + */ +static inline void sata_fsl_cache_taskfile_from_d2h_fis(struct ata_queued_cmd + *qc, + struct ata_port *ap) +{ + struct sata_fsl_port_priv *pp = ap->private_data; + u8 fis[6 * 4]; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); + struct command_desc *cd; + + cd = pp->cmdentry + tag; + + memcpy(fis, &cd->sfis, 6 * 4); /* should we use memcpy_from_io() */ + ata_tf_from_fis(fis, &pp->tf); +} + +static u8 sata_fsl_check_status(struct ata_port *ap) +{ + struct sata_fsl_port_priv *pp = ap->private_data; + + return pp->tf.command; +} + +static void sata_fsl_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct sata_fsl_port_priv *pp = ap->private_data; + + *tf = pp->tf; +} + +static int sata_fsl_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct sata_fsl_port_priv *pp; + int retval; + void *mem; + dma_addr_t mem_dma; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + pp = kzalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + /* + * allocate per command dma alignment pad buffer, which is used + * internally by libATA to ensure that all transfers ending on + * unaligned boundaries are padded, to align on Dword boundaries + */ + retval = ata_pad_alloc(ap, dev); + if (retval) { + kfree(pp); + return retval; + } + + mem = dma_alloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma, + GFP_KERNEL); + if (!mem) { + ata_pad_free(ap, dev); + kfree(pp); + return -ENOMEM; + } + memset(mem, 0, SATA_FSL_PORT_PRIV_DMA_SZ); + + pp->cmdslot = mem; + pp->cmdslot_paddr = mem_dma; + + mem += SATA_FSL_CMD_SLOT_SIZE; + mem_dma += SATA_FSL_CMD_SLOT_SIZE; + + pp->cmdentry = mem; + pp->cmdentry_paddr = mem_dma; + + ap->private_data = pp; + + VPRINTK("CHBA = 0x%x, cmdentry_phys = 0x%x\n", + pp->cmdslot_paddr, pp->cmdentry_paddr); + + /* Now, update the CHBA register in host controller cmd register set */ + iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA); + + /* + * Now, we can bring the controller on-line & also initiate + * the COMINIT sequence, we simply return here and the boot-probing + * & device discovery process is re-initiated by libATA using a + * Softreset EH (dummy) session. Hence, boot probing and device + * discovey will be part of sata_fsl_softreset() callback. + */ + + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | HCONTROL_ONLINE_PHY_RST), hcr_base + HCONTROL); + + VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + VPRINTK("CHBA = 0x%x\n", ioread32(hcr_base + CHBA)); + + /* + * Workaround for 8315DS board 3gbps link-up issue, + * currently limit SATA port to GEN1 speed + */ + sata_fsl_scr_read(ap, SCR_CONTROL, &temp); + temp &= ~(0xF << 4); + temp |= (0x1 << 4); + sata_fsl_scr_write(ap, SCR_CONTROL, temp); + + sata_fsl_scr_read(ap, SCR_CONTROL, &temp); + dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n", + temp); + + return 0; +} + +static void sata_fsl_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct sata_fsl_port_priv *pp = ap->private_data; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + /* + * Force host controller to go off-line, aborting current operations + */ + temp = ioread32(hcr_base + HCONTROL); + temp &= ~HCONTROL_ONLINE_PHY_RST; + temp |= HCONTROL_FORCE_OFFLINE; + iowrite32(temp, hcr_base + HCONTROL); + + /* Poll for controller to go offline - should happen immediately */ + ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1); + + ap->private_data = NULL; + dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, + pp->cmdslot, pp->cmdslot_paddr); + + ata_pad_free(ap, dev); + kfree(pp); +} + +static unsigned int sata_fsl_dev_classify(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + struct ata_taskfile tf; + u32 temp; + + temp = ioread32(hcr_base + SIGNATURE); + + VPRINTK("raw sig = 0x%x\n", temp); + VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + + tf.lbah = (temp >> 24) & 0xff; + tf.lbam = (temp >> 16) & 0xff; + tf.lbal = (temp >> 8) & 0xff; + tf.nsect = temp & 0xff; + + return ata_dev_classify(&tf); +} + +static int sata_fsl_softreset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) +{ + struct sata_fsl_port_priv *pp = ap->private_data; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + struct ata_taskfile tf; + u8 *cfis; + u32 Serror; + int i = 0; + struct ata_queued_cmd qc; + u8 *buf; + dma_addr_t dma_address; + struct scatterlist *sg; + unsigned long start_jiffies; + + DPRINTK("in xx_softreset\n"); + +try_offline_again: + /* + * Force host controller to go off-line, aborting current operations + */ + temp = ioread32(hcr_base + HCONTROL); + temp &= ~HCONTROL_ONLINE_PHY_RST; + iowrite32(temp, hcr_base + HCONTROL); + + /* Poll for controller to go offline */ + temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 500); + + if (temp & ONLINE) { + ata_port_printk(ap, KERN_ERR, + "Softreset failed, not off-lined %d\n", i); + + /* + * Try to offline controller atleast twice + */ + i++; + if (i == 2) + goto err; + else + goto try_offline_again; + } + + DPRINTK("softreset, controller off-lined\n"); + VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + + /* + * PHY reset should remain asserted for atleast 1ms + */ + msleep(1); + + /* + * Now, bring the host controller online again, this can take time + * as PHY reset and communication establishment, 1st D2H FIS and + * device signature update is done, on safe side assume 500ms + * NOTE : Host online status may be indicated immediately!! + */ + + temp = ioread32(hcr_base + HCONTROL); + temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE); + iowrite32(temp, hcr_base + HCONTROL); + + temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500); + + if (!(temp & ONLINE)) { + ata_port_printk(ap, KERN_ERR, + "Softreset failed, not on-lined\n"); + goto err; + } + + DPRINTK("softreset, controller off-lined & on-lined\n"); + VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + + /* + * First, wait for the PHYRDY change to occur before waiting for + * the signature, and also verify if SStatus indicates device + * presence + */ + + temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500); + if ((!(temp & 0x10)) || ata_port_offline(ap)) { + ata_port_printk(ap, KERN_WARNING, + "No Device OR PHYRDY change,Hstatus = 0x%x\n", + ioread32(hcr_base + HSTATUS)); + goto err; + } + + /* + * Wait for the first D2H from device,i.e,signature update notification + */ + start_jiffies = jiffies; + temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0x10, + 500, jiffies_to_msecs(deadline - start_jiffies)); + + if ((temp & 0xFF) != 0x18) { + ata_port_printk(ap, KERN_WARNING, "No Signature Update\n"); + goto err; + } else { + ata_port_printk(ap, KERN_INFO, + "Signature Update detected @ %d msecs\n", + jiffies_to_msecs(jiffies - start_jiffies)); + } + + /* + * Send a device reset (SRST) explicitly on command slot #0 + * Check : will the command queue (reg) be cleared during offlining ?? + * Also we will be online only if Phy commn. has been established + * and device presence has been detected, therefore if we have + * reached here, we can send a command to the target device + */ + + if (ap->sactive) + goto skip_srst_do_ncq_error_handling; + + DPRINTK("Sending SRST/device reset\n"); + + ata_tf_init(ap->device, &tf); + cfis = (u8 *) & pp->cmdentry->cfis; + + /* device reset/SRST is a control register update FIS, uses tag0 */ + sata_fsl_setup_cmd_hdr_entry(pp, 0, + SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); + + tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */ + ata_tf_to_fis(&tf, 0, 0, cfis); + + DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n", + cfis[0], cfis[1], cfis[2], cfis[3]); + + /* + * Queue SRST command to the controller/device, ensure that no + * other commands are active on the controller/device + */ + + DPRINTK("@Softreset, CQ = 0x%x, CA = 0x%x, CC = 0x%x\n", + ioread32(CQ + hcr_base), + ioread32(CA + hcr_base), ioread32(CC + hcr_base)); + + iowrite32(0xFFFF, CC + hcr_base); + iowrite32(1, CQ + hcr_base); + + temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000); + if (temp & 0x1) { + ata_port_printk(ap, KERN_WARNING, "ATA_SRST issue failed\n"); + + DPRINTK("Softreset@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n", + ioread32(CQ + hcr_base), + ioread32(CA + hcr_base), ioread32(CC + hcr_base)); + + sata_fsl_scr_read(ap, SCR_ERROR, &Serror); + + DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + DPRINTK("Serror = 0x%x\n", Serror); + goto err; + } + + msleep(1); + + /* + * SATA device enters reset state after receving a Control register + * FIS with SRST bit asserted and it awaits another H2D Control reg. + * FIS with SRST bit cleared, then the device does internal diags & + * initialization, followed by indicating it's initialization status + * using ATA signature D2H register FIS to the host controller. + */ + + sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5); + + tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */ + ata_tf_to_fis(&tf, 0, 0, cfis); + + iowrite32(1, CQ + hcr_base); + msleep(150); /* ?? */ + + /* + * The above command would have signalled an interrupt on command + * complete, which needs special handling, by clearing the Nth + * command bit of the CCreg + */ + iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */ + goto check_device_signature; + +skip_srst_do_ncq_error_handling: + + VPRINTK("Sending read log ext(10h) command\n"); + + memset(&qc, 0, sizeof(struct ata_queued_cmd)); + ata_tf_init(ap->device, &tf); + + tf.command = ATA_CMD_READ_LOG_EXT; + tf.lbal = ATA_LOG_SATA_NCQ; + tf.nsect = 1; + tf.hob_nsect = 0; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_PIO; + + qc.tag = ATA_TAG_INTERNAL; + qc.scsicmd = NULL; + qc.ap = ap; + qc.dev = ap->device; + + qc.tf = tf; + qc.flags |= ATA_QCFLAG_RESULT_TF; + qc.dma_dir = DMA_FROM_DEVICE; + + buf = ap->sector_buf; + ata_sg_init_one(&qc, buf, 1 * ATA_SECT_SIZE); + + /* + * Need to DMA-map the memory buffer associated with the command + */ + + sg = qc.__sg; + dma_address = dma_map_single(ap->dev, qc.buf_virt, + sg->length, DMA_FROM_DEVICE); + + sg_dma_address(sg) = dma_address; + sg_dma_len(sg) = sg->length; + + VPRINTK("EH, addr = 0x%x, len = 0x%x\n", dma_address, sg->length); + + sata_fsl_qc_prep(&qc); + sata_fsl_qc_issue(&qc); + + temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000); + if (temp & 0x1) { + VPRINTK("READ_LOG_EXT_10H issue failed\n"); + + VPRINTK("READ_LOG@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n", + ioread32(CQ + hcr_base), + ioread32(CA + hcr_base), ioread32(CC + hcr_base)); + + sata_fsl_scr_read(ap, SCR_ERROR, &Serror); + + VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + VPRINTK("Serror = 0x%x\n", Serror); + goto err; + } + + iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */ + + check_device_signature: + + DPRINTK("SATA FSL : Now checking device signature\n"); + + *class = ATA_DEV_NONE; + + /* Verify if SStatus indicates device presence */ + if (ata_port_online(ap)) { + /* + * if we are here, device presence has been detected, + * 1st D2H FIS would have been received, but sfis in + * command desc. is not updated, but signature register + * would have been updated + */ + + *class = sata_fsl_dev_classify(ap); + + DPRINTK("class = %d\n", *class); + VPRINTK("ccreg = 0x%x\n", ioread32(hcr_base + CC)); + VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE)); + } + + return 0; + +err: + return -EIO; +} + +static int sata_fsl_hardreset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) +{ + int retval; + + retval = sata_std_hardreset(ap, class, deadline); + + DPRINTK("SATA FSL : in xx_hardreset, retval = 0x%d\n", retval); + + return retval; +} + +static void sata_fsl_error_handler(struct ata_port *ap) +{ + + DPRINTK("in xx_error_handler\n"); + + /* perform recovery */ + ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_fsl_hardreset, + ata_std_postreset); +} + +static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc) +{ + if (qc->flags & ATA_QCFLAG_FAILED) + qc->err_mask |= AC_ERR_OTHER; + + if (qc->err_mask) { + /* make DMA engine forget about the failed command */ + + } +} + +static void sata_fsl_irq_clear(struct ata_port *ap) +{ + /* unused */ +} + +static void sata_fsl_error_intr(struct ata_port *ap) +{ + struct ata_eh_info *ehi = &ap->eh_info; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 hstatus, dereg, cereg = 0, SError = 0; + unsigned int err_mask = 0, action = 0; + struct ata_queued_cmd *qc; + int freeze = 0; + + hstatus = ioread32(hcr_base + HSTATUS); + cereg = ioread32(hcr_base + CE); + + ata_ehi_clear_desc(ehi); + + /* + * Handle & Clear SError + */ + + sata_fsl_scr_read(ap, SCR_ERROR, &SError); + if (unlikely(SError & 0xFFFF0000)) { + sata_fsl_scr_write(ap, SCR_ERROR, SError); + err_mask |= AC_ERR_ATA_BUS; + } + + DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n", + hstatus, cereg, ioread32(hcr_base + DE), SError); + + /* handle single device errors */ + if (cereg) { + /* + * clear the command error, also clears queue to the device + * in error, and we can (re)issue commands to this device. + * When a device is in error all commands queued into the + * host controller and at the device are considered aborted + * and the queue for that device is stopped. Now, after + * clearing the device error, we can issue commands to the + * device to interrogate it to find the source of the error. + */ + dereg = ioread32(hcr_base + DE); + iowrite32(dereg, hcr_base + DE); + iowrite32(cereg, hcr_base + CE); + + DPRINTK("single device error, CE=0x%x, DE=0x%x\n", + ioread32(hcr_base + CE), ioread32(hcr_base + DE)); + /* + * We should consider this as non fatal error, and TF must + * be updated as done below. + */ + + err_mask |= AC_ERR_DEV; + } + + /* handle fatal errors */ + if (hstatus & FATAL_ERROR_DECODE) { + err_mask |= AC_ERR_ATA_BUS; + action |= ATA_EH_SOFTRESET; + /* how will fatal error interrupts be completed ?? */ + freeze = 1; + } + + /* Handle PHYRDY change notification */ + if (hstatus & INT_ON_PHYRDY_CHG) { + DPRINTK("SATA FSL: PHYRDY change indication\n"); + + /* Setup a soft-reset EH action */ + ata_ehi_hotplugged(ehi); + freeze = 1; + } + + /* record error info */ + qc = ata_qc_from_tag(ap, ap->active_tag); + + if (qc) { + sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap); + qc->err_mask |= err_mask; + } else + ehi->err_mask |= err_mask; + + ehi->action |= action; + ehi->serror |= SError; + + /* freeze or abort */ + if (freeze) + ata_port_freeze(ap); + else + ata_port_abort(ap); +} + +static void sata_fsl_qc_complete(struct ata_queued_cmd *qc) +{ + if (qc->flags & ATA_QCFLAG_RESULT_TF) { + DPRINTK("xx_qc_complete called\n"); + sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap); + } +} + +static void sata_fsl_host_intr(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 hstatus, qc_active = 0; + struct ata_queued_cmd *qc; + u32 SError; + + hstatus = ioread32(hcr_base + HSTATUS); + + sata_fsl_scr_read(ap, SCR_ERROR, &SError); + + if (unlikely(SError & 0xFFFF0000)) { + DPRINTK("serror @host_intr : 0x%x\n", SError); + sata_fsl_error_intr(ap); + + } + + if (unlikely(hstatus & INT_ON_ERROR)) { + DPRINTK("error interrupt!!\n"); + sata_fsl_error_intr(ap); + return; + } + + if (ap->sactive) { /* only true for NCQ commands */ + int i; + /* Read command completed register */ + qc_active = ioread32(hcr_base + CC); + /* clear CC bit, this will also complete the interrupt */ + iowrite32(qc_active, hcr_base + CC); + + DPRINTK("Status of all queues :\n"); + DPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x\n", + qc_active, ioread32(hcr_base + CA), + ioread32(hcr_base + CE)); + + for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) { + if (qc_active & (1 << i)) { + qc = ata_qc_from_tag(ap, i); + if (qc) { + sata_fsl_qc_complete(qc); + ata_qc_complete(qc); + } + DPRINTK + ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n", + i, ioread32(hcr_base + CC), + ioread32(hcr_base + CA)); + } + } + return; + + } else if (ap->qc_active) { + iowrite32(1, hcr_base + CC); + qc = ata_qc_from_tag(ap, ap->active_tag); + + DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n", + ap->active_tag, ioread32(hcr_base + CC)); + + if (qc) { + sata_fsl_qc_complete(qc); + ata_qc_complete(qc); + } + } else { + /* Spurious Interrupt!! */ + DPRINTK("spurious interrupt!!, CC = 0x%x\n", + ioread32(hcr_base + CC)); + return; + } +} + +static irqreturn_t sata_fsl_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct sata_fsl_host_priv *host_priv = host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 interrupt_enables; + unsigned handled = 0; + struct ata_port *ap; + + /* ack. any pending IRQs for this controller/port */ + interrupt_enables = ioread32(hcr_base + HSTATUS); + interrupt_enables &= 0x3F; + + DPRINTK("interrupt status 0x%x\n", interrupt_enables); + + if (!interrupt_enables) + return IRQ_NONE; + + spin_lock(&host->lock); + + /* Assuming one port per host controller */ + + ap = host->ports[0]; + if (ap) { + sata_fsl_host_intr(ap); + } else { + dev_printk(KERN_WARNING, host->dev, + "interrupt on disabled port 0\n"); + } + + iowrite32(interrupt_enables, hcr_base + HSTATUS); + handled = 1; + + spin_unlock(&host->lock); + + return IRQ_RETVAL(handled); +} + +/* + * Multiple ports are represented by multiple SATA controllers with + * one port per controller + */ +static int sata_fsl_init_controller(struct ata_host *host) +{ + struct sata_fsl_host_priv *host_priv = host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + /* + * NOTE : We cannot bring the controller online before setting + * the CHBA, hence main controller initialization is done as + * part of the port_start() callback + */ + + /* ack. any pending IRQs for this controller/port */ + temp = ioread32(hcr_base + HSTATUS); + if (temp & 0x3F) + iowrite32((temp & 0x3F), hcr_base + HSTATUS); + + /* Keep interrupts disabled on the controller */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp & ~0x3F), hcr_base + HCONTROL); + + /* Disable interrupt coalescing control(icc), for the moment */ + DPRINTK("icc = 0x%x\n", ioread32(hcr_base + ICC)); + iowrite32(0x01000000, hcr_base + ICC); + + /* clear error registers, SError is cleared by libATA */ + iowrite32(0x00000FFFF, hcr_base + CE); + iowrite32(0x00000FFFF, hcr_base + DE); + + /* initially assuming no Port multiplier, set CQPMP to 0 */ + iowrite32(0x0, hcr_base + CQPMP); + + /* + * host controller will be brought on-line, during xx_port_start() + * callback, that should also initiate the OOB, COMINIT sequence + */ + + DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); + DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); + + return 0; +} + +/* + * scsi mid-layer and libata interface structures + */ +static struct scsi_host_template sata_fsl_sht = { + .module = THIS_MODULE, + .name = "sata_fsl", + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .change_queue_depth = ata_scsi_change_queue_depth, + .can_queue = SATA_FSL_QUEUE_DEPTH, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = SATA_FSL_MAX_PRD_USABLE, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = "sata_fsl", + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +#ifdef CONFIG_PM + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, +#endif +}; + +static const struct ata_port_operations sata_fsl_ops = { + .port_disable = ata_port_disable, + + .check_status = sata_fsl_check_status, + .check_altstatus = sata_fsl_check_status, + .dev_select = ata_noop_dev_select, + + .tf_read = sata_fsl_tf_read, + + .qc_prep = sata_fsl_qc_prep, + .qc_issue = sata_fsl_qc_issue, + .irq_clear = sata_fsl_irq_clear, + .irq_on = ata_dummy_irq_on, + .irq_ack = ata_dummy_irq_ack, + + .scr_read = sata_fsl_scr_read, + .scr_write = sata_fsl_scr_write, + + .freeze = sata_fsl_freeze, + .thaw = sata_fsl_thaw, + .error_handler = sata_fsl_error_handler, + .post_internal_cmd = sata_fsl_post_internal_cmd, + + .port_start = sata_fsl_port_start, + .port_stop = sata_fsl_port_stop, +}; + +static const struct ata_port_info sata_fsl_port_info[] = { + { + .flags = SATA_FSL_HOST_FLAGS, + .pio_mask = 0x1f, /* pio 0-4 */ + .udma_mask = 0x7f, /* udma 0-6 */ + .port_ops = &sata_fsl_ops, + }, +}; + +static int sata_fsl_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + int retval = 0; + void __iomem *hcr_base = NULL; + void __iomem *ssr_base = NULL; + void __iomem *csr_base = NULL; + struct sata_fsl_host_priv *host_priv = NULL; + struct resource *r; + int irq; + struct ata_host *host; + + struct ata_port_info pi = sata_fsl_port_info[0]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + + dev_printk(KERN_INFO, &ofdev->dev, + "Sata FSL Platform/CSB Driver init\n"); + + r = kmalloc(sizeof(struct resource), GFP_KERNEL); + + hcr_base = of_iomap(ofdev->node, 0); + if (!hcr_base) + goto error_exit_with_cleanup; + + ssr_base = hcr_base + 0x100; + csr_base = hcr_base + 0x140; + + DPRINTK("@reset i/o = 0x%x\n", ioread32(csr_base + TRANSCFG)); + DPRINTK("sizeof(cmd_desc) = %d\n", sizeof(struct command_desc)); + DPRINTK("sizeof(#define cmd_desc) = %d\n", SATA_FSL_CMD_DESC_SIZE); + + host_priv = kzalloc(sizeof(struct sata_fsl_host_priv), GFP_KERNEL); + if (!host_priv) + goto error_exit_with_cleanup; + + host_priv->hcr_base = hcr_base; + host_priv->ssr_base = ssr_base; + host_priv->csr_base = csr_base; + + irq = irq_of_parse_and_map(ofdev->node, 0); + if (irq < 0) { + dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n"); + goto error_exit_with_cleanup; + } + + /* allocate host structure */ + host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS); + + /* host->iomap is not used currently */ + host->private_data = host_priv; + + /* setup port(s) */ + + host->ports[0]->ioaddr.cmd_addr = host_priv->hcr_base; + host->ports[0]->ioaddr.scr_addr = host_priv->ssr_base; + + /* initialize host controller */ + sata_fsl_init_controller(host); + + /* + * Now, register with libATA core, this will also initiate the + * device discovery process, invoking our port_start() handler & + * error_handler() to execute a dummy Softreset EH session + */ + ata_host_activate(host, irq, sata_fsl_interrupt, SATA_FSL_IRQ_FLAG, + &sata_fsl_sht); + + dev_set_drvdata(&ofdev->dev, host); + + return 0; + +error_exit_with_cleanup: + + if (hcr_base) + iounmap(hcr_base); + if (host_priv) + kfree(host_priv); + + return retval; +} + +static int sata_fsl_remove(struct of_device *ofdev) +{ + struct ata_host *host = dev_get_drvdata(&ofdev->dev); + struct sata_fsl_host_priv *host_priv = host->private_data; + + ata_host_detach(host); + + dev_set_drvdata(&ofdev->dev, NULL); + + irq_dispose_mapping(host->irq); + iounmap(host_priv->hcr_base); + kfree(host_priv); + + return 0; +} + +static struct of_device_id fsl_sata_match[] = { + { + .compatible = "fsl,mpc8315-sata", + }, + { + .compatible = "fsl,mpc8379-sata", + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, fsl_sata_match); + +static struct of_platform_driver fsl_sata_driver = { + .name = "fsl-sata", + .match_table = fsl_sata_match, + .probe = sata_fsl_probe, + .remove = sata_fsl_remove, +}; + +static int __init sata_fsl_init(void) +{ + of_register_platform_driver(&fsl_sata_driver); + return 0; +} + +static void __exit sata_fsl_exit(void) +{ + of_unregister_platform_driver(&fsl_sata_driver); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ashish Kalra, Freescale Semiconductor"); +MODULE_DESCRIPTION("Freescale 3.0Gbps SATA controller low level driver"); +MODULE_VERSION("1.10"); + +module_init(sata_fsl_init); +module_exit(sata_fsl_exit); -- 1.5.3.2.104.g41ef - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html