On Wed, 10 Oct 2007 15:17:19 -0400 "Greg Cormier" <gcormier@xxxxxxxxx> wrote: > I'd like to hop in on this, and add my similar problem. This is my > first post so please excuse me if I'm doing something wrong. Please cc linux-ide@xxxxxxxxxxxxxxx on ide, sata and pata reports. A "hard freeze" is fairly serious. > I've been having issues recently (couple of weeks?) with my server. I > have three WD5000YS (500gb) drives in RAID5, on an Asus A8N > motherboard which is nForce 4. I've even RMA'd one of the drives, but > now I'm thinking the drives are fine. > > The drive seems to have issues under heavy to moderate IO. I unmounted > my raid, and forced an e2fsck. e2fsck didn't even print anything out, > I got this. > > Oct 10 14:50:40 zeus kernel: ata3: EH in ADMA mode, notifier 0x0 > notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x0 > next cpb idx 0x0 > Oct 10 14:50:40 zeus kernel: ata3: CPB 0: ctl_flags 0x1f, resp_flags 0x2 > Oct 10 14:50:40 zeus kernel: ata3: timeout waiting for ADMA IDLE, stat=0x400 > Oct 10 14:50:40 zeus kernel: ata3: timeout waiting for ADMA LEGACY, stat=0x400 > Oct 10 14:50:40 zeus kernel: ata3.00: exception Emask 0x0 SAct 0x1 > SErr 0x1c00000 action 0x2 frozen > Oct 10 14:50:40 zeus kernel: ata3.00: cmd > 61/08:00:bf:4b:38/00:00:3a:00:00/40 tag 0 cdb 0x0 data 4096 out > Oct 10 14:50:40 zeus kernel: res > 40/00:f2:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > Oct 10 14:50:40 zeus kernel: ata3: soft resetting port > Oct 10 14:50:40 zeus kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 > SControl 300) > Oct 10 14:50:40 zeus kernel: ata3.00: configured for UDMA/133 > Oct 10 14:50:40 zeus kernel: ata3: EH complete > Oct 10 14:50:40 zeus kernel: sd 2:0:0:0: [sdb] 976773168 512-byte > hardware sectors (500108 MB) > Oct 10 14:50:40 zeus kernel: sd 2:0:0:0: [sdb] Write Protect is off > Oct 10 14:50:40 zeus kernel: sd 2:0:0:0: [sdb] Write cache: enabled, > read cache: enabled, doesn't support DPO or FUA > Oct 10 14:51:40 zeus kernel: ata3: EH in ADMA mode, notifier 0x0 > notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x0 > next cpb idx 0x0 > Oct 10 14:51:40 zeus kernel: ata3: CPB 0: ctl_flags 0x1f, resp_flags 0x2 > Oct 10 14:51:40 zeus kernel: ata3: timeout waiting for ADMA IDLE, stat=0x400 > Oct 10 14:51:40 zeus kernel: ata3: timeout waiting for ADMA LEGACY, stat=0x400 > Oct 10 14:51:40 zeus kernel: ata3.00: exception Emask 0x0 SAct 0x1 > SErr 0x400000 action 0x2 frozen > Oct 10 14:51:40 zeus kernel: ata3.00: cmd > 61/08:00:bf:4b:38/00:00:3a:00:00/40 tag 0 cdb 0x0 data 4096 out > Oct 10 14:51:40 zeus kernel: res > 40/00:f2:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > Oct 10 14:51:41 zeus kernel: ata3: soft resetting port > Oct 10 14:51:41 zeus kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 > SControl 300) > Oct 10 14:51:41 zeus kernel: ata3.00: configured for UDMA/133 > Oct 10 14:51:41 zeus kernel: ata3: EH complete > Oct 10 14:51:41 zeus kernel: sd 2:0:0:0: [sdb] 976773168 512-byte > hardware sectors (500108 MB) > Oct 10 14:51:41 zeus kernel: sd 2:0:0:0: [sdb] Write Protect is off > Oct 10 14:51:41 zeus kernel: sd 2:0:0:0: [sdb] Write cache: enabled, > read cache: enabled, doesn't support DPO or FUA > Oct 10 14:52:19 zeus kernel: device eth0 left promiscuous mode > Oct 10 14:52:41 zeus kernel: ata3: EH in ADMA mode, notifier 0x0 > notifier_error 0x0 gen_ctl 0x1501000 status 0x400 next cpb count 0x0 > next cpb idx 0x0 > Oct 10 14:52:41 zeus kernel: ata3: CPB 0: ctl_flags 0x1f, resp_flags 0x2 > Oct 10 14:52:41 zeus kernel: ata3: timeout waiting for ADMA IDLE, stat=0x400 > Oct 10 14:52:41 zeus kernel: ata3: timeout waiting for ADMA LEGACY, stat=0x400 > Oct 10 14:52:41 zeus kernel: ata3.00: exception Emask 0x0 SAct 0x1 > SErr 0x400000 action 0x2 frozen > Oct 10 14:52:41 zeus kernel: ata3.00: cmd > 61/08:00:bf:4b:38/00:00:3a:00:00/40 tag 0 cdb 0x0 data 4096 out > Oct 10 14:52:41 zeus kernel: res > 40/00:f2:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > Oct 10 14:52:41 zeus kernel: ata3: soft resetting port > Oct 10 14:52:42 zeus kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 > SControl 300) > Oct 10 14:52:42 zeus kernel: ata3.00: configured for UDMA/133 > Oct 10 14:52:42 zeus kernel: ata3: EH complete > Oct 10 14:52:42 zeus kernel: sd 2:0:0:0: [sdb] 976773168 512-byte > hardware sectors (500108 MB) > Oct 10 14:52:42 zeus kernel: sd 2:0:0:0: [sdb] Write Protect is off > Oct 10 14:52:42 zeus kernel: sd 2:0:0:0: [sdb] Write cache: enabled, > read cache: enabled, doesn't support DPO or FUA > > These errors have been happening on various .22 kernels, and this > message is from the hot-off-the-press .23 kernel. This message is > followed by a hard freeze. > > I'm in the process of figuring out why netconsole isn't quite working, > so hopefully I can provide more information soon. The server is > currently frozen, when I get home I can perhaps provide more > information? lspci? > > Looks like another rebuild of the array when I get home. > > > Thanks, > Greg > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
