On Wed, 10 Oct 2007, Li Yang wrote: > From: Ashish Kalra <ashish.kalra@xxxxxxxxxxxxx> > > This patch adds support for Freescale 3.0Gbps SATA Controller supporting > Native Command Queueing(NCQ), device hotplug, and ATAPI. This controller > can be found on MPC8315 and MPC8378. > > Signed-off-by: Ashish Kalra <ashish.kalra@xxxxxxxxxxxxx> > Signed-off-by: Li Yang <leoli@xxxxxxxxxxxxx> > --- > drivers/ata/Kconfig | 9 + > drivers/ata/Makefile | 1 + > drivers/ata/sata_fsl.c | 1505 ++++++++++++++++++++++++++++++++++++++++++++++++ > drivers/ata/sata_fsl.h | 104 ++++ > 4 files changed, 1619 insertions(+), 0 deletions(-) > create mode 100644 drivers/ata/sata_fsl.c > create mode 100644 drivers/ata/sata_fsl.h This patch shouldn't be accepted until we close on the device tree definition since it impacts the driver. Also CONFIG_SATA_FSL_FPGA_PCI should be removed since that was just an internal debug thing. - k - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
