ATA_EHI_NO_AUTOPSY and ATA_EHI_QUIET are used during initial probing to skip exception analysis and reporting. Usually, there's nothing to report but on some allowed but rare corner cases (e.g. phy status changed interrupt when IRQ is enabled on frozen port - this happens if IRQ pending status isn't cleared in the IRQ router or controller) exception messages get printed. Skip reporting if ATA_EHI_QUIET is set. Signed-off-by: Tejun Heo <htejun@xxxxxxxxx> --- drivers/ata/libata-eh.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 0bd3898..866ac9d 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1868,6 +1868,9 @@ static void ata_eh_link_report(struct ata_link *link) char tries_buf[6]; int tag, nr_failed = 0; + if (ehc->i.flags & ATA_EHI_QUIET) + return; + desc = NULL; if (ehc->i.desc[0] != '\0') desc = ehc->i.desc; -- 1.5.0.3 - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
