Load IDE_SECTOR_REG after IDE_FEATURE_REG and IDE_NSECTOR_REG when using CHS. This patch is basically a preparation for the next one which converts __ide_do_rw_disk() to use struct ide_taskfile. It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx> --- drivers/ide/ide-disk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Index: b/drivers/ide/ide-disk.c =================================================================== --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -238,7 +238,6 @@ static ide_startstop_t __ide_do_rw_disk( unsigned int sect,head,cyl,track; track = (int)block / drive->sect; sect = (int)block % drive->sect + 1; - hwif->OUTB(sect, IDE_SECTOR_REG); head = track % drive->head; cyl = track / drive->head; @@ -246,6 +245,7 @@ static ide_startstop_t __ide_do_rw_disk( hwif->OUTB(0x00, IDE_FEATURE_REG); hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); + hwif->OUTB(sect, IDE_SECTOR_REG); hwif->OUTB(cyl, IDE_LCYL_REG); hwif->OUTB(cyl>>8, IDE_HCYL_REG); hwif->OUTB(head|drive->select.all,IDE_SELECT_REG); - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
