[sorry for sending twice, but after I read the sil sources, I see the mail address had been wrong] Hi, somehow the sil3114 causes data corruption with some (newer?) disks. Simply filling the filesystem with zeros and reading the these data will make the kernel to report filesystem corruption. This is definitely not an issue of memory, since the systems (several tested) do have ECC memory and the memory is monitored with EDAC. Also not an issue of the filesystem, also several tested. [ 345.051369] Vendor: ATA Model: ST3250820AS Rev: 3.AA [ 345.060526] Type: Direct-Access ANSI SCSI revision: 05 [ 345.069302] Vendor: ATA Model: ST3200822AS Rev: 3.01 [ 345.078551] Type: Direct-Access ANSI SCSI revision: 05 [ 345.087522] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 345.095381] SCSI device sda: drive cache: write back [ 345.101314] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 345.109150] SCSI device sda: drive cache: write back [ 345.115007] /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 [ 345.134017] sd 0:0:0:0: Attached scsi disk sda [ 345.139458] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB) [ 345.147558] SCSI device sdb: drive cache: write back [ 345.153671] SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB) [ 345.161740] SCSI device sdb: drive cache: write back [ 345.167725] /dev/scsi/host1/bus0/target0/lun0: p1 p2 p3 [ 345.187133] sd 1:0:0:0: Attached scsi disk sdb The ST3250820AS data on the ST3250820AS disk will suffer from data corruption, but the data on the older ST3200822AS will *not*. kernel versions tested: 2.6.15-2.6.20 Any ideas how to proceed? Thanks, Bernd -- Bernd Schubert Q-Leap Networks GmbH - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html