Hi, I have an external enclosure based on the SiI 4726 connected to the 3531 controller. It mostly works on a Debian 2.6.22 kernel patched with libata-tj-2.6.22.1-20070808. But occasionally under high load there are timeouts. Usually, the system recovers without a problem but once a disk wasn't found after the reset. It took a power off/power on of the device. Another weird problem is that the SiI 4726 software doesn't find its controller, although the config disk is found by the system. I was going to use the device in JBOD mode anyway so this isn't a big deal. Thanks for a great job. It's amazing how well this works already. I see on the SiI site they distribute a kernel module for Suse/Redhat for the 3531. Is the source available for it and does it work better with it? Oct 6 22:18:09 black kernel: ata1.03: exception Emask 0x0 SAct 0x2 SErr 0x0 act ion 0x2 frozen Oct 6 22:18:09 black kernel: ata1.03: cmd 60/40:08:5f:f1:c1/00:00:0e:00:00/40 t ag 1 cdb 0x0 data 32768 in Oct 6 22:18:09 black kernel: res 40/00:00:00:00:00/00:00:00:00:00/00 E mask 0x4 (timeout) Oct 6 22:18:09 black kernel: ata1.15: hard resetting link Oct 6 22:18:11 black kernel: ata1.15: SATA link up 3.0 Gbps (SStatus 123 SContr ol 0) Oct 6 22:18:11 black kernel: ata1.00: hard resetting link Oct 6 22:18:12 black kernel: ata1.00: SATA link up 3.0 Gbps (SStatus 123 SContr ol 300) Oct 6 22:18:12 black kernel: ata1.01: hard resetting link Oct 6 22:18:13 black kernel: ata1.01: SATA link up 3.0 Gbps (SStatus 123 SContr ol 300) Oct 6 22:18:13 black kernel: ata1.02: hard resetting link Oct 6 22:18:13 black kernel: ata1.02: SATA link up 3.0 Gbps (SStatus 123 SContr ol 300) Oct 6 22:18:13 black kernel: ata1.03: hard resetting link Oct 6 22:18:14 black kernel: ata1.03: SATA link up 3.0 Gbps (SStatus 123 SContr ol 300) Oct 6 22:18:14 black kernel: ata1.04: hard resetting link Oct 6 22:18:14 black kernel: ata1.04: SATA link down (SStatus 0 SControl 300) Oct 6 22:18:14 black kernel: ata1.05: hard resetting link Oct 6 22:18:15 black kernel: ata1.05: SATA link up 3.0 Gbps (SStatus 123 SContr ol 0) Oct 6 22:18:15 black kernel: ata1.06: hard resetting link Oct 6 22:18:16 black kernel: ata1.06: SATA link up 1.5 Gbps (SStatus 113 SContr ol 300) Oct 6 22:18:16 black kernel: ata1.00: configured for UDMA/100 Oct 6 22:18:16 black kernel: ata1.01: configured for UDMA/100 Oct 6 22:18:16 black kernel: ata1.02: configured for UDMA/100 Oct 6 22:18:16 black kernel: ata1.03: configured for UDMA/100 Oct 6 22:18:16 black kernel: ata1.05: device is on DMA blacklist, disabling DMA Oct 6 22:18:16 black kernel: ata1.05: configured for PIO4 Oct 6 22:18:16 black kernel: ata1: EH complete Oct 6 22:18:16 black kernel: sd 0:0:0:0: [sdf] 976773168 512-byte hardware sect ors (500108 MB) Oct 6 22:18:16 black kernel: sd 0:0:0:0: [sdf] Write Protect is off Oct 6 22:18:16 black kernel: sd 0:0:0:0: [sdf] Mode Sense: 00 3a 00 00 Oct 6 22:18:16 black kernel: sd 0:0:0:0: [sdf] Write cache: enabled, read cache : enabled, doesn't support DPO or FUA Oct 6 22:18:16 black kernel: sd 0:1:0:0: [sdg] 976773168 512-byte hardware sect ors (500108 MB) Oct 6 22:18:16 black kernel: sd 0:1:0:0: [sdg] Write Protect is off Oct 6 22:18:16 black kernel: sd 0:1:0:0: [sdg] Mode Sense: 00 3a 00 00 Oct 6 22:18:16 black kernel: sd 0:1:0:0: [sdg] Write cache: enabled, read cache : enabled, doesn't support DPO or FUA Oct 6 22:18:16 black kernel: sd 0:2:0:0: [sdh] 976773168 512-byte hardware sect ors (500108 MB) Oct 6 22:18:16 black kernel: sd 0:2:0:0: [sdh] Write Protect is off Oct 6 22:18:16 black kernel: sd 0:2:0:0: [sdh] Mode Sense: 00 3a 00 00 Oct 6 22:18:16 black kernel: sd 0:2:0:0: [sdh] Write cache: enabled, read cache : enabled, doesn't support DPO or FUA Oct 6 22:18:16 black kernel: sd 0:3:0:0: [sdi] 976773168 512-byte hardware sect ors (500108 MB) Oct 6 22:18:16 black kernel: sd 0:3:0:0: [sdi] Write Protect is off Oct 6 22:18:16 black kernel: sd 0:3:0:0: [sdi] Mode Sense: 00 3a 00 00 Oct 6 22:18:16 black kernel: sd 0:3:0:0: [sdi] Write cache: enabled, read cache : enabled, doesn't support DPO or FUA Oct 6 22:18:16 black kernel: sd 0:5:0:0: [sdj] 640 512-byte hardware sectors (0 MB) Oct 6 22:18:16 black kernel: sd 0:5:0:0: [sdj] Write Protect is off Oct 6 22:18:16 black kernel: sd 0:5:0:0: [sdj] Mode Sense: 00 3a 00 00 Oct 6 22:18:16 black kernel: sd 0:5:0:0: [sdj] Write cache: disabled, read cach e: enabled, doesn't support DPO or FUA Oct 6 22:18:16 black kernel: sd 0:0:0:0: [sdf] 976773168 512-byte hardware sect ors (500108 MB) Oct 6 22:18:16 black kernel: sd 0:0:0:0: [sdf] Write Protect is off Oct 6 22:18:16 black kernel: sd 0:0:0:0: [sdf] Mode Sense: 00 3a 00 00 Oct 6 22:18:16 black kernel: sd 0:0:0:0: [sdf] Write cache: enabled, read cache : enabled, doesn't support DPO or FUA Oct 6 22:18:16 black kernel: sd 0:1:0:0: [sdg] 976773168 512-byte hardware sect ors (500108 MB) Oct 6 22:18:16 black kernel: sd 0:1:0:0: [sdg] Write Protect is off Oct 6 22:18:16 black kernel: sd 0:1:0:0: [sdg] Mode Sense: 00 3a 00 00 Oct 6 22:18:16 black kernel: sd 0:1:0:0: [sdg] Write cache: enabled, read cache : enabled, doesn't support DPO or FUA Oct 6 22:18:16 black kernel: sd 0:2:0:0: [sdh] 976773168 512-byte hardware sect ors (500108 MB) Oct 6 22:18:16 black kernel: sd 0:2:0:0: [sdh] Write Protect is off Oct 6 22:18:16 black kernel: sd 0:2:0:0: [sdh] Mode Sense: 00 3a 00 00 Oct 6 22:18:16 black kernel: sd 0:2:0:0: [sdh] Write cache: enabled, read cache : enabled, doesn't support DPO or FUA Oct 6 22:18:16 black kernel: sd 0:3:0:0: [sdi] 976773168 512-byte hardware sect ors (500108 MB) Oct 6 22:18:16 black kernel: sd 0:3:0:0: [sdi] Write Protect is off Oct 6 22:18:16 black kernel: sd 0:3:0:0: [sdi] Mode Sense: 00 3a 00 00 Oct 6 22:18:16 black kernel: sd 0:3:0:0: [sdi] Write cache: enabled, read cache : enabled, doesn't support DPO or FUA Oct 6 22:18:16 black kernel: sd 0:5:0:0: [sdj] 640 512-byte hardware sectors (0 MB) Oct 6 22:18:16 black kernel: sd 0:5:0:0: [sdj] Write Protect is off Oct 6 22:18:16 black kernel: sd 0:5:0:0: [sdj] Mode Sense: 00 3a 00 00 Oct 6 22:18:16 black kernel: sd 0:5:0:0: [sdj] Write cache: disabled, read cach e: enabled, doesn't support DPO or FUA - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html