Thomas Tsai wrote: > Hi, > > Does anyone familiar with SiliconImage 3132 SATA controller? > I'm running siliconimage 3132 as e-Sata controller on my ARM-based board. > My kernel version is 2.6.18.6. I built libata and sata_sil24 as kernel > module. > After I insert libata and sata_sil24 module, and plug external > harddrive via e-Sata. > sata_sil24.c can detect phy changed, and found a ATA device. > And then it will issue IDENTIFY(0xec) command but time out to get > command completion. > And Sil3132 seems dead or enter into an unknown state.Since it will > not issue any interrupts even I remove and replug the e-Sata cable. > Does anyone have experienced this situation, or any suggestion. > Thanks. You need to post the kernel log at least. -- tejun - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
