Re: Failed to IDENTIFY SATA harddrive on sata_sil24

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thomas Tsai wrote:
Does anyone familiar with SiliconImage 3132 SATA controller?
I'm running siliconimage 3132 as e-Sata controller on my ARM-based board.
My kernel version is 2.6.18.6. I built libata and sata_sil24 as kernel module.
After I insert libata and sata_sil24 module, and plug external
harddrive via e-Sata.
sata_sil24.c can detect phy changed, and found a ATA device.
And then it will issue IDENTIFY(0xec) command but time out to get
command completion.
And Sil3132 seems dead or enter into an unknown state.Since it will
not issue any interrupts even I remove and replug the e-Sata cable.

Your platform's interrupt delivery is broken.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux